prev_cmp_denano.qmsg

开发板原理图 需要做开发板的可以参考参考

{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_FOOTER" "" "Info: Finished processing fast register assignments" {  } {  } 0 0 "Finished processing fast register assignments" 0 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_LUT_PACKING" "00:00:00 " "Extra Info: Finished moving registers into LUTs: elapsed time is 00:00:00" {  } {  } 1 0 "Finished moving registers into LUTs: elapsed time is %1!s!" 1 0 "" 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" {  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0 "" 0}
{ "Warning" "WCUT_CUT_UNATTACHED_ASGN" "" "Warning: Ignored locations or region assignments to the following nodes" { { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "KEY\[2\] " "Warning: Node \"KEY\[2\]\" is assigned to location or region, but does not exist in design" {  } { { "c:/altera/71/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/71/quartus/bin/Assignment Editor.qase" 1 { { 0 "KEY\[2\]" } } } }  } 0 0 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "" 0} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "KEY\[3\] " "Warning: Node \"KEY\[3\]\" is assigned to location or region, but does not exist in design" {  } { { "c:/altera/71/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/71/quartus/bin/Assignment Editor.qase" 1 { { 0 "KEY\[3\]" } } } }  } 0 0 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "" 0}  } {  } 0 0 "Ignored locations or region assignments to the following nodes" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "7.471 ns register register " "Info: Estimated most critical path is register to register delay of 7.471 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns Traffic_Light:m\|Cont\[7\] 1 REG LAB_X14_Y8 6 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X14_Y8; Fanout = 6; REG Node = 'Traffic_Light:m\|Cont\[7\]'" {  } { { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "" { Traffic_Light:m|Cont[7] } "NODE_NAME" } } { "Traffic_Light.v" "" { Text "D:/DEN/Traffic Light Mode/Traffic_Light.v" 77 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(1.443 ns) + CELL(0.125 ns) 1.568 ns Traffic_Light:m\|Equal1~175 2 COMB LAB_X14_Y7 1 " "Info: 2: + IC(1.443 ns) + CELL(0.125 ns) = 1.568 ns; Loc. = LAB_X14_Y7; Fanout = 1; COMB Node = 'Traffic_Light:m\|Equal1~175'" {  } { { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "1.568 ns" { Traffic_Light:m|Cont[7] Traffic_Light:m|Equal1~175 } "NODE_NAME" } } { "Traffic_Light.v" "" { Text "D:/DEN/Traffic Light Mode/Traffic_Light.v" 66 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.614 ns) + CELL(0.125 ns) 2.307 ns Traffic_Light:m\|LessThan8~254 3 COMB LAB_X14_Y7 4 " "Info: 3: + IC(0.614 ns) + CELL(0.125 ns) = 2.307 ns; Loc. = LAB_X14_Y7; Fanout = 4; COMB Node = 'Traffic_Light:m\|LessThan8~254'" {  } { { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "0.739 ns" { Traffic_Light:m|Equal1~175 Traffic_Light:m|LessThan8~254 } "NODE_NAME" } } { "Traffic_Light.v" "" { Text "D:/DEN/Traffic Light Mode/Traffic_Light.v" 57 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.879 ns) + CELL(0.125 ns) 3.311 ns Traffic_Light:m\|always0~2350 4 COMB LAB_X13_Y7 1 " "Info: 4: + IC(0.879 ns) + CELL(0.125 ns) = 3.311 ns; Loc. = LAB_X13_Y7; Fanout = 1; COMB Node = 'Traffic_Light:m\|always0~2350'" {  } { { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "1.004 ns" { Traffic_Light:m|LessThan8~254 Traffic_Light:m|always0~2350 } "NODE_NAME" } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.952 ns) + CELL(0.462 ns) 4.725 ns Traffic_Light:m\|always0~2352 5 COMB LAB_X16_Y7 1 " "Info: 5: + IC(0.952 ns) + CELL(0.462 ns) = 4.725 ns; Loc. = LAB_X16_Y7; Fanout = 1; COMB Node = 'Traffic_Light:m\|always0~2352'" {  } { { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "1.414 ns" { Traffic_Light:m|always0~2350 Traffic_Light:m|always0~2352 } "NODE_NAME" } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.420 ns) + CELL(0.319 ns) 5.464 ns Traffic_Light:m\|always0~2361 6 COMB LAB_X16_Y7 2 " "Info: 6: + IC(0.420 ns) + CELL(0.319 ns) = 5.464 ns; Loc. = LAB_X16_Y7; Fanout = 2; COMB Node = 'Traffic_Light:m\|always0~2361'" {  } { { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "0.739 ns" { Traffic_Light:m|always0~2352 Traffic_Light:m|always0~2361 } "NODE_NAME" } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(1.344 ns) + CELL(0.663 ns) 7.471 ns Traffic_Light:m\|mLED\[1\] 7 REG LAB_X14_Y6 1 " "Info: 7: + IC(1.344 ns) + CELL(0.663 ns) = 7.471 ns; Loc. = LAB_X14_Y6; Fanout = 1; REG Node = 'Traffic_Light:m\|mLED\[1\]'" {  } { { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "2.007 ns" { Traffic_Light:m|always0~2361 Traffic_Light:m|mLED[1] } "NODE_NAME" } } { "Traffic_Light.v" "" { Text "D:/DEN/Traffic Light Mode/Traffic_Light.v" 77 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "1.819 ns ( 24.35 % ) " "Info: Total cell delay = 1.819 ns ( 24.35 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0 "" 0} { "Info" "ITDB_TOTAL_IC_DELAY" "5.652 ns ( 75.65 % ) " "Info: Total interconnect delay = 5.652 ns ( 75.65 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0 "" 0}  } { { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "7.471 ns" { Traffic_Light:m|Cont[7] Traffic_Light:m|Equal1~175 Traffic_Light:m|LessThan8~254 Traffic_Light:m|always0~2350 Traffic_Light:m|always0~2352 Traffic_Light:m|always0~2361 Traffic_Light:m|mLED[1] } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "1 3 " "Info: Average interconnect usage is 1% of the available device resources. Peak interconnect usage is 3%" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "X11_Y0 X21_Y14 " "Info: The peak interconnect region extends from location X11_Y0 to location X21_Y14" {  } {  } 0 0 "The peak interconnect region extends from location %1!s! to location %2!s!" 0 0 "" 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources. Peak interconnect usage is %2!d!%%" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "2 " "Warning: Following 2 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "LED\[0\] VCC " "Info: Pin LED\[0\] has VCC driving its datain port" {  } { { "DEnano.v" "" { Text "D:/DEN/Traffic Light Mode/DEnano.v" 6 -1 0 } } { "c:/altera/71/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/71/quartus/bin/Assignment Editor.qase" 1 { { 0 "LED\[0\]" } } } } { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "" { LED[0] } "NODE_NAME" } } { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "" { LED[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "LED\[4\] VCC " "Info: Pin LED\[4\] has VCC driving its datain port" {  } { { "DEnano.v" "" { Text "D:/DEN/Traffic Light Mode/DEnano.v" 6 -1 0 } } { "c:/altera/71/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/71/quartus/bin/Assignment Editor.qase" 1 { { 0 "LED\[4\]" } } } } { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "" { LED[4] } "NODE_NAME" } } { "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "" { LED[4] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0 "" 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "" 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "D:/DEN/Traffic Light Mode/DEnano.fit.smsg " "Info: Generated suppressed messages file D:/DEN/Traffic Light Mode/DEnano.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 5 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "182 " "Info: Allocated 182 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0 "" 0} { "Info" "IQEXE_END_BANNER_TIME" "Wed May 02 00:00:04 2007 " "Info: Processing ended: Wed May 02 00:00:04 2007" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Info: Elapsed time: 00:00:02" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0}
{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0}