readme.txt

富士通单片机MB98F108 C语言开发例程。有使用说明

==========================================================================
                 Template Project for 8FX Series (CONCERTO-Kit)
==========================================================================
                   Fujitsu Microelectronics Europe GmbH                       
                 http://emea.fujitsu.com/microelectronics 
                                                            
 The following  software  is for  demonstration  purposes only.  It is not
 fully  tested, nor validated  in order  to fullfill  its task  under  all
 circumstances.  Therefore,  this software or  any part of it must only be
 used in an evaluation laboratory environment.                        
 This software is subject to the rules of our standard DISCLAIMER, that is
 delivered with our  SW-tools on the Fujitsu Microcontrollers CD 
 (V3.4 or higher "\START.HTM") or on our Internet Pages:
 http://www.fme.gsdc.de/gsdc.htm
 http://emea.fujitsu.com/microelectronics 
==========================================================================
               
History
Date      Ver     Author  Softune     Description
12.10.04  1.0     HWE     V30L29      original version
04.07.04  1.1     MVo     V30L29      vectors.c updated
03.01.06  1.2     MVo     V30L29      headerfile updated
23.06.06  1.3     MVo     V30L29      new Start8FX.asm
07.11.07  1.4     MVo     V30L30      new Start8FX.asm, new vectors.c,
                                      added monitor debugger support

==========================================================================

This is a project template for the MB95F108 (8FX Series)
that is used on the evaluation board CONCERTO-Kit.

It includes some basic settings for e.g. Linker, C-Compiler 
which must be checked and modified in detail, 
corresponding to the user application.


NOTE 1: 
-------

This template contains two different project configurations:

-STANDALONE: 
Use this configuration for generating code to be directly flashed to MB95F1xx 
microcontroller (standalone usage) or to be used with the emulation system 
consisting of BGM adapter MB2146-09(A) and MCU board -301(A) or MB2146-303(A).

-MONDEB:
Use this configuration for generating code to be debugged by use of the 
Softune Workbench Monitor Debugger for 8FX. Therefore  MB2146-09A-E has to be used 
for connection to PC. Please note that additional files as well an assembler 
and C-compiler definition (MONITORDEBUGGER_CONFIGURATION) will be added 
automatically to the application build process. 
Monitor Debugger is only supported from Softune Workbench V30L30 or later!

Please see application note mcu-an-300049-e-8fx_swb_monitor_debugger for more 
information.



NOTE 2: 
-------

This template uses the headerfiles mb95100.asm and mb95100.h 
of the 8FX evaluation chip MB95FV100 (HORN).
Take care that not all resources will be available 
in each 8FX flash-/mask-device.

Further, ROM and RAM settings are limited within this project.
Correct these settings within the Linker-Options:

- Softune Workbench
  - Project
    - Setup Poject
      - Linker: Category: Disposition-Connection

        RAM  512 byte: 0x80 - 0x27F
            1024 byte: 0x80 - 0x47F
            2048 byte: 0x80 - 0x87F         <<< CONCERTO-Kit
    
        ROM   16k :  0xC000 - 0xFFFF
              32k :  0x8000 - 0xFFFF
              60k :  0x1000 - 0xFFFF        <<< CONCERTO-Kit
       
Please check the datasheet and hardwaremanual of the related product.