⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pci.c

📁 上传linux-jx2410的源代码
💻 C
字号:
/* * Carsten Langgaard, carstenl@mips.com * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved. * *  This program is free software; you can distribute it and/or modify it *  under the terms of the GNU General Public License (Version 2) as *  published by the Free Software Foundation. * *  This program is distributed in the hope it will be useful, but WITHOUT *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License *  for more details. * *  You should have received a copy of the GNU General Public License along *  with this program; if not, write to the Free Software Foundation, Inc., *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * * MIPS boards specific PCI support. * */#include <linux/config.h>#ifdef CONFIG_PCI#include <linux/types.h>#include <linux/pci.h>#include <linux/kernel.h>#include <linux/init.h>#include <asm/mips-boards/generic.h>#include <asm/gt64120.h>#ifdef CONFIG_MIPS_MALTA#include <asm/mips-boards/malta.h>#endif#define PCI_ACCESS_READ  0#define PCI_ACCESS_WRITE 1static intmips_pcibios_config_access(unsigned char access_type, struct pci_dev *dev,                           unsigned char where, u32 *data){	unsigned char bus = dev->bus->number;	unsigned char dev_fn = dev->devfn;        u32 intr;	if ((bus == 0) && (dev_fn >= PCI_DEVFN(31,0)))	        return -1; /* Because of a bug in the galileo (for slot 31). */	/* Clear cause register bits */	GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT | 	                             GT_INTRCAUSE_TARABORT0_BIT));	/* Setup address */	GT_WRITE(GT_PCI0_CFGADDR_OFS, 		 (bus         << GT_PCI0_CFGADDR_BUSNUM_SHF)   |		 (dev_fn      << GT_PCI0_CFGADDR_FUNCTNUM_SHF) |		 ((where / 4) << GT_PCI0_CFGADDR_REGNUM_SHF)   |		 GT_PCI0_CFGADDR_CONFIGEN_BIT);	if (access_type == PCI_ACCESS_WRITE) {	        if (bus == 0 && dev_fn == 0) {		        /* 			 * Galileo is acting differently than other devices. 			 */		        GT_WRITE(GT_PCI0_CFGDATA_OFS, *data);		} else {		        GT_PCI_WRITE(GT_PCI0_CFGDATA_OFS, *data);		}	} else {	        if (bus == 0 && dev_fn == 0) {		        /* 			 * Galileo is acting differently than other devices. 			 */		        GT_READ(GT_PCI0_CFGDATA_OFS, *data);		} else {		        GT_PCI_READ(GT_PCI0_CFGDATA_OFS, *data);		}	}	/* Check for master or target abort */	GT_READ(GT_INTRCAUSE_OFS, intr);	if (intr & (GT_INTRCAUSE_MASABORT0_BIT | GT_INTRCAUSE_TARABORT0_BIT))	{	        /* Error occured */	        /* Clear bits */	        GT_WRITE( GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT | 					      GT_INTRCAUSE_TARABORT0_BIT) );		return -1;	}	return 0;}/* * We can't address 8 and 16 bit words directly.  Instead we have to * read/write a 32bit word and mask/modify the data we actually want. */static intmips_pcibios_read_config_byte (struct pci_dev *dev, int where, u8 *val){	u32 data = 0;	if (mips_pcibios_config_access(PCI_ACCESS_READ, dev, where, &data))		return -1;	*val = (data >> ((where & 3) << 3)) & 0xff;	return PCIBIOS_SUCCESSFUL;}static intmips_pcibios_read_config_word (struct pci_dev *dev, int where, u16 *val){	u32 data = 0;	if (where & 1)		return PCIBIOS_BAD_REGISTER_NUMBER;	if (mips_pcibios_config_access(PCI_ACCESS_READ, dev, where, &data))	       return -1;	*val = (data >> ((where & 3) << 3)) & 0xffff;	return PCIBIOS_SUCCESSFUL;}static intmips_pcibios_read_config_dword (struct pci_dev *dev, int where, u32 *val){	u32 data = 0;	if (where & 3)		return PCIBIOS_BAD_REGISTER_NUMBER;		if (mips_pcibios_config_access(PCI_ACCESS_READ, dev, where, &data))		return -1;	*val = data;	return PCIBIOS_SUCCESSFUL;}static intmips_pcibios_write_config_byte (struct pci_dev *dev, int where, u8 val){	u32 data = 0;       	if (mips_pcibios_config_access(PCI_ACCESS_READ, dev, where, &data))		return -1;	data = (data & ~(0xff << ((where & 3) << 3))) |	       (val << ((where & 3) << 3));	if (mips_pcibios_config_access(PCI_ACCESS_WRITE, dev, where, &data))		return -1;	return PCIBIOS_SUCCESSFUL;}static intmips_pcibios_write_config_word (struct pci_dev *dev, int where, u16 val){        u32 data = 0;	if (where & 1)		return PCIBIOS_BAD_REGISTER_NUMBER;               if (mips_pcibios_config_access(PCI_ACCESS_READ, dev, where, &data))	       return -1;	data = (data & ~(0xffff << ((where & 3) << 3))) | 	       (val << ((where & 3) << 3));	if (mips_pcibios_config_access(PCI_ACCESS_WRITE, dev, where, &data))	       return -1;	return PCIBIOS_SUCCESSFUL;}static intmips_pcibios_write_config_dword(struct pci_dev *dev, int where, u32 val){	if (where & 3)		return PCIBIOS_BAD_REGISTER_NUMBER;	if (mips_pcibios_config_access(PCI_ACCESS_WRITE, dev, where, &val))	       return -1;	return PCIBIOS_SUCCESSFUL;}struct pci_ops mips_pci_ops = {	mips_pcibios_read_config_byte,        mips_pcibios_read_config_word,	mips_pcibios_read_config_dword,	mips_pcibios_write_config_byte,	mips_pcibios_write_config_word,	mips_pcibios_write_config_dword};void __init pcibios_init(void){#ifdef CONFIG_MIPS_MALTA	struct pci_dev *pdev;	unsigned char reg_val;#endif	printk("PCI: Probing PCI hardware on host bus 0.\n");	pci_scan_bus(0, &mips_pci_ops, NULL);	/* 	 * Due to a bug in the Galileo system controller, we need to setup 	 * the PCI BAR for the Galileo internal registers.	 * This should be done in the bios/bootprom and will be fixed in	 * a later revision of YAMON (the MIPS boards boot prom).	 */	GT_WRITE(GT_PCI0_CFGADDR_OFS,		 (0 << GT_PCI0_CFGADDR_BUSNUM_SHF)   |  /* Local bus */		 (0 << GT_PCI0_CFGADDR_DEVNUM_SHF)   |  /* GT64120 device */		 (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) |  /* Function 0 */		 ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) |  /* BAR 4 */		 GT_PCI0_CFGADDR_CONFIGEN_BIT );	/* Perform the write */	GT_WRITE( GT_PCI0_CFGDATA_OFS, PHYSADDR(MIPS_GT_BASE)); #ifdef CONFIG_MIPS_MALTA	pci_for_each_dev(pdev) {		if ((pdev->vendor == PCI_VENDOR_ID_INTEL)		    && (pdev->device == PCI_DEVICE_ID_INTEL_82371AB)		    && (PCI_SLOT(pdev->devfn) == 0x0a)) {			/*			 * IDE Decode enable.			 */			pci_read_config_byte(pdev, 0x41, &reg_val);        		pci_write_config_byte(pdev, 0x41, reg_val | 0x80);			pci_read_config_byte(pdev, 0x43, &reg_val);        		pci_write_config_byte(pdev, 0x43, reg_val | 0x80);		}		if ((pdev->vendor == PCI_VENDOR_ID_INTEL)		    && (pdev->device == PCI_DEVICE_ID_INTEL_82371AB_0)		    && (PCI_SLOT(pdev->devfn) == 0x0a)) {			/*			 * Set top of main memory accessible by ISA or DMA			 * devices to 16 Mb.			 */			pci_read_config_byte(pdev, 0x69, &reg_val);			pci_write_config_byte(pdev, 0x69, reg_val | 0xf0);		}	}	/* 	 * Activate Floppy Controller in the SMSC FDC37M817 Super I/O 	 * Controller.	 * This should be done in the bios/bootprom and will be fixed in         * a later revision of YAMON (the MIPS boards boot prom).	 */	/* Entering config state. */	SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG);        	/* Activate floppy controller. */	SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG);	SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG);	SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG);	SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG);	/* Exit config state. */	SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG);#endif}int __initpcibios_enable_device(struct pci_dev *dev){	/* Not needed, since we enable all devices at startup.  */	return 0;}void __initpcibios_align_resource(void *data, struct resource *res, unsigned long size){}char * __initpcibios_setup(char *str){	/* Nothing to do for now.  */	return str;}struct pci_fixup pcibios_fixups[] = {	{ 0 }};void __initpcibios_update_resource(struct pci_dev *dev, struct resource *root,                        struct resource *res, int resource){	unsigned long where, size;	u32 reg;	where = PCI_BASE_ADDRESS_0 + (resource * 4);	size = res->end - res->start;	pci_read_config_dword(dev, where, &reg);	reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);	pci_write_config_dword(dev, where, reg);}/* *  Called after each bus is probed, but before its children *  are examined. */void __init pcibios_fixup_bus(struct pci_bus *b){	pci_read_bridge_bases(b);}unsigned __init int pcibios_assign_all_busses(void){	return 1;}#endif /* CONFIG_PCI */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -