cycloneiii_3c25_start_niosii_standard_settings.tcl

来自「nios里面用自定义指令集来实现三角函数」· TCL 代码 · 共 154 行

project_open -current_revision cycloneIII_3c25_start_niosII_standard.qpf

# Analysis & Synthesis Assignments
# ================================
set_global_assignment -name TOP_LEVEL_ENTITY cycloneIII_3c25_start_niosII_standard
set_global_assignment -name SDC_FILE altmemddr_phy_report_timing.sdc
set_global_assignment -name SDC_FILE cycloneIII_3c25_start_niosII_standard.sdc

# Fitter Assignments
# ==================
set_global_assignment -name CYCLONEII_OPTIMIZATION_TECHNIQUE SPEED
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED"
set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_DATA0_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_DATA1_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name FITTER_EFFORT "STANDARD FIT"
set_global_assignment -name TIMEQUEST_MULTICORNER_ANALYSIS ON
set_global_assignment -name OPTIMIZE_HOLD_TIMING "ALL PATHS"
set_global_assignment -name OPTIMIZE_FAST_CORNER_TIMING ON
#set_global_assignment -name ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP ON
#set_global_assignment -name ADV_NETLIST_OPT_SYNTH_GATE_RETIME ON
#set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC ON
#set_global_assignment -name PHYSICAL_SYNTHESIS_EFFORT EXTRA
#set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION ON
#set_global_assignment -name PHYSICAL_SYNTHESIS_ASYNCHRONOUS_SIGNAL_PIPELINING ON
#set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_RETIMING ON
#set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC_FOR_AREA ON
#set_global_assignment -name PHYSICAL_SYNTHESIS_MAP_LOGIC_TO_MEMORY_FOR_AREA ON
set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
set_global_assignment -name PARTITION_COLOR 2147039 -section_id Top
set_global_assignment -name LL_ROOT_REGION ON -section_id "Root Region"
set_global_assignment -name LL_MEMBER_STATE LOCKED -section_id "Root Region"
set_global_assignment -name ENABLE_ADVANCED_IO_TIMING ON

# Assembler Assignments
# =====================
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "AS INPUT TRI-STATED"


# DDR Pin assignments
# These are added temporarily because it appears that the DDR is not setting
# the quartus file to run the TCL script which sets these settings.
# =====================
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_clk[0]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_clk[0]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_clk_n[0]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_clk_n[0]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_cs_n[0]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_cs_n[0]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_cke[0]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_cke[0]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[0]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[0]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[1]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[1]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[2]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[2]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[3]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[3]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[4]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[4]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[5]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[5]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[6]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[6]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[7]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[7]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[8]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[8]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[9]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[9]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[10]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[10]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[11]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[11]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_addr[12]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_addr[12]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_ba[0]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_ba[0]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_ba[1]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_ba[1]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_ras_n
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_ras_n
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_cas_n
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_cas_n
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_we_n
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_we_n
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[0]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[0]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[0]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[1]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[1]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[1]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[2]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[2]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[2]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[3]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[3]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[3]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[4]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[4]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[4]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[5]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[5]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[5]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[6]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[6]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[6]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[7]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[7]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[7]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[8]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[8]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[8]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[9]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[9]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[9]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[10]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[10]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[10]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[11]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[11]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[11]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[12]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[12]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[12]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[13]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[13]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[13]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[14]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[14]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[14]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dq[15]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dq[15]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dq[15]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dqs[0]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dqs[0]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dqs[0]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dqs[1]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dqs[1]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dqs[1]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dm[0]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dm[0]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dm[0]
set_instance_assignment -name IO_STANDARD "SSTL-2 CLASS I" -to mem_dm[1]
set_instance_assignment -name CURRENT_STRENGTH_NEW 12MA -to mem_dm[1]
set_instance_assignment -name OUTPUT_ENABLE_GROUP 1191024410 -to mem_dm[1]
set_instance_assignment -name PARTITION_HIERARCHY no_file_for_top_partition -to | -section_id Top


project_close