af.s51

来自「TI的基于ZIGBEE2006的协议栈」· S51 代码 · 共 1,631 行 · 第 1/5 页

S51
1,631 行
字号
12345
//  185 epList_t *afRegisterExtended( endPointDesc_t *epDesc, pDescCB descFn )
afRegisterExtended:
        CFI Block cfiBlock1 Using cfiCommon0
        CFI Function afRegisterExtended
//  186 {
        FUNCALL afRegisterExtended, osal_mem_alloc
        LOCFRAME XSTACK, 14, STACK
        ARGFRAME XSTACK, 14, STACK
        MOV	A,#-0xe
        LCALL	?BANKED_ENTER_XDATA
        CFI DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        CFI R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI V5 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI V4 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI V3 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI V2 load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI V1 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI V0 load(1, XDATA, add(CFA_XSP16, literal(-12)))
        CFI VB load(1, XDATA, add(CFA_XSP16, literal(-13)))
        CFI R6 load(1, XDATA, add(CFA_XSP16, literal(-14)))
        CFI CFA_SP SP+0
        CFI CFA_XSP16 add(XSP16, 14)
        ; Saved register size: 14
        ; Auto size: 0
        MOV	A,R2
        MOV	R6,A
        MOV	A,R3
        MOV	R7,A
        MOV	A,#0xe
        LCALL	?XSTACK_DISP0_8
        MOVX	A,@DPTR
        MOV	?V0 + 0,A
        INC	DPTR
        MOVX	A,@DPTR
        MOV	?V0 + 1,A
        INC	DPTR
        MOVX	A,@DPTR
        MOV	?V0 + 2,A
//  187   epList_t *ep;
//  188   epList_t *epSearch;
//  189 
//  190   ep = osal_mem_alloc( sizeof ( epList_t ) );
        ; Setup parameters for call to function osal_mem_alloc
        MOV	R2,#0xa
        MOV	R3,#0x0
        MOV	DPTR,#(osal_mem_alloc & 0xffff)
        MOV	A,#((osal_mem_alloc >> 16) & 0xff)
        LCALL	?BCALL               ; Banked call to: DPTR()
//  191   if ( ep )
        MOV	A,R2
        JNZ	??afRegisterExtended_0
        MOV	A,R3
??afRegisterExtended_0:
        JZ	??afRegisterExtended_1
//  192   {
//  193     // Fill in the new list entry
//  194     ep->epDesc = epDesc;
        MOV	DPL,R2
        MOV	DPH,R3
        MOV	A,R6
        MOVX	@DPTR,A
        INC	DPTR
        MOV	A,R7
        LCALL	?Subroutine2 & 0xFFFF
//  195     #if !defined ( REFLECTOR )
//  196     ep->reflectorAddr = NWK_PAN_COORD_ADDR;
??CrossCallReturnLabel_2:
        CLR	A
        MOVX	@DPTR,A
        INC	DPTR
        MOVX	@DPTR,A
//  197     #else
//  198     ep->reflectorAddr = INVALID_NODE_ADDR;
//  199     #endif
//  200     // Default to allow Match Descriptor.
//  201     ep->flags = eEP_AllowMatch;
        MOV	A,#0x1
        MOV	DPL,R2
        MOV	DPH,R3
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        LCALL	?Subroutine1 & 0xFFFF
//  202 #if ( AF_KVP_SUPPORT )
//  203     ep->flags |= ((epDesc->endPoint == ZDO_EP) ? 0 : eEP_UsesKVP);
//  204 #endif
//  205     ep->pfnDescCB = descFn;
??CrossCallReturnLabel_101:
        MOV	A,?V0 + 0
        MOVX	@DPTR,A
        INC	DPTR
        MOV	A,?V0 + 1
        MOVX	@DPTR,A
        INC	DPTR
        MOV	A,?V0 + 2
        LCALL	?Subroutine1 & 0xFFFF
//  206     ep->nextDesc = NULL;
??CrossCallReturnLabel_102:
        INC	DPTR
        INC	DPTR
        INC	DPTR
        CLR	A
        MOVX	@DPTR,A
        INC	DPTR
        MOVX	@DPTR,A
//  207 
//  208     // Does a list exist?
//  209     if ( epList == NULL )
        MOV	DPTR,#epList
        MOVX	A,@DPTR
        JNZ	??afRegisterExtended_2
        INC	DPTR
        MOVX	A,@DPTR
??afRegisterExtended_2:
        MOV	DPTR,#epList
        JZ	??afRegisterExtended_3
//  210       epList = ep;  // Make this the first entry
//  211     else
//  212     {
//  213       // Look for the end of the list
//  214       epSearch = epList;
//  215       while( epSearch->nextDesc != NULL )
//  216         epSearch = epSearch->nextDesc;
??afRegisterExtended_4:
        LCALL	?Subroutine19 & 0xFFFF
??CrossCallReturnLabel_54:
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        MOVX	A,@DPTR
        JNZ	??afRegisterExtended_5
        INC	DPTR
        MOVX	A,@DPTR
??afRegisterExtended_5:
        MOV	DPL,R0
        MOV	DPH,R1
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        JNZ	??afRegisterExtended_4
//  217 
//  218       // Add new entry to end of list
//  219       epSearch->nextDesc = ep;
??afRegisterExtended_3:
        MOV	A,R2
        MOVX	@DPTR,A
        INC	DPTR
        MOV	A,R3
        MOVX	@DPTR,A
        CFI EndBlock cfiBlock1
//  220     }
//  221   }
//  222 
//  223   return ep;
??afRegisterExtended_1:
        REQUIRE ?Subroutine31
        ; // Fall through to label ?Subroutine31
//  224 }

        RSEG BANKED_CODE:CODE:NOROOT(0)
?Subroutine31:
        CFI Block cfiBlock2 Using cfiCommon0
        CFI NoFunction
        CFI CFA_SP SP+0
        CFI CFA_XSP16 add(XSP16, 14)
        CFI VB load(1, XDATA, add(CFA_XSP16, literal(-13)))
        CFI DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI R6 load(1, XDATA, add(CFA_XSP16, literal(-14)))
        CFI R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI V0 load(1, XDATA, add(CFA_XSP16, literal(-12)))
        CFI V1 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI V2 load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI V3 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI V4 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI V5 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        MOV	R7,#0x6
        LJMP	?BANKED_LEAVE_XDATA
        CFI EndBlock cfiBlock2

        RSEG BANKED_CODE:CODE:NOROOT(0)
?Subroutine1:
        CFI Block cfiCond3 Using cfiCommon0
        CFI NoFunction
        CFI Conditional ??CrossCallReturnLabel_102
        CFI R6 load(1, XDATA, add(CFA_XSP16, literal(-14)))
        CFI VB load(1, XDATA, add(CFA_XSP16, literal(-13)))
        CFI V0 load(1, XDATA, add(CFA_XSP16, literal(-12)))
        CFI V1 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI V2 load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI V3 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI V4 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI V5 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        CFI ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI CFA_SP SP+0
        CFI CFA_XSP16 add(XSP16, 14)
        CFI Block cfiCond4 Using cfiCommon0
        CFI (cfiCond4) NoFunction
        CFI (cfiCond4) Conditional ??CrossCallReturnLabel_101
        CFI (cfiCond4) R6 load(1, XDATA, add(CFA_XSP16, literal(-14)))
        CFI (cfiCond4) VB load(1, XDATA, add(CFA_XSP16, literal(-13)))
        CFI (cfiCond4) V0 load(1, XDATA, add(CFA_XSP16, literal(-12)))
        CFI (cfiCond4) V1 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI (cfiCond4) V2 load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI (cfiCond4) V3 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI (cfiCond4) V4 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI (cfiCond4) V5 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI (cfiCond4) R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI (cfiCond4) ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        CFI (cfiCond4) ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI (cfiCond4) ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI (cfiCond4) DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI (cfiCond4) DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI (cfiCond4) CFA_SP SP+0
        CFI (cfiCond4) CFA_XSP16 add(XSP16, 14)
        CFI Block cfiPicker5 Using cfiCommon1
        CFI (cfiPicker5) NoFunction
        CFI (cfiPicker5) Picker
        MOVX	@DPTR,A
        MOV	DPL,R2
        MOV	DPH,R3
        LJMP	?Subroutine32 & 0xFFFF
        CFI EndBlock cfiCond3
        CFI EndBlock cfiCond4
        CFI EndBlock cfiPicker5
//  225 
//  226 /*********************************************************************
//  227  * @fn      afRegister
//  228  *
//  229  * @brief   Register an Application's EndPoint description.
//  230  *
//  231  * @param   epDesc - pointer to the Application's endpoint descriptor.
//  232  *
//  233  * NOTE:  The memory that epDesc is pointing to must exist after this call.
//  234  *
//  235  * @return  afStatus_SUCCESS - Registered
//  236  *          afStatus_MEM_FAIL - not enough memory to add descriptor
//  237  */

        RSEG BANKED_CODE:CODE:NOROOT(0)
//  238 afStatus_t afRegister( endPointDesc_t *epDesc )
afRegister:
        CFI Block cfiBlock6 Using cfiCommon0
        CFI Function afRegister
//  239 {
        FUNCALL afRegister, afRegisterExtended
        LOCFRAME XSTACK, 14, STACK
        ARGFRAME XSTACK, 14, STACK
        MOV	A,#-0xb
        LCALL	?BANKED_ENTER_XDATA
        CFI DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        CFI R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI V2 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI V1 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI V0 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI VB load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI R6 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI CFA_SP SP+0
        CFI CFA_XSP16 add(XSP16, 11)
        ; Saved register size: 11
        ; Auto size: 0
//  240   epList_t *ep = afRegisterExtended( epDesc, NULL );
//  241 
//  242   return ((ep == NULL) ? afStatus_MEM_FAIL : afStatus_SUCCESS);
        ; Setup parameters for call to function afRegisterExtended
        MOV	?V0 + 0,#0x0
        MOV	?V0 + 1,#0x0
        MOV	?V0 + 2,#0x0
        MOV	R0,#?V0 + 0
        LCALL	?PUSH_XSTACK_I_THREE
        CFI CFA_XSP16 add(XSP16, 14)
        MOV	DPTR,#(afRegisterExtended & 0xffff)
        MOV	A,#((afRegisterExtended >> 16) & 0xff)
        LCALL	?BCALL               ; Banked call to: DPTR()
        MOV	A,#0x3
        LCALL	?DEALLOC_XSTACK8
        CFI CFA_XSP16 add(XSP16, 11)
        MOV	A,R2
        JNZ	??afRegister_0
        MOV	A,R3
??afRegister_0:
        JNZ	??afRegister_1
        MOV	R1,#-0x7f
        SJMP	??afRegister_2
??afRegister_1:
        MOV	R1,#0x0
??afRegister_2:
        MOV	R7,#0x3
        LJMP	?BANKED_LEAVE_XDATA
        CFI EndBlock cfiBlock6
//  243 }
//  244 
//  245 #if ( AF_KVP_SUPPORT )
//  246 /*********************************************************************
//  247  * @fn      afRegisterFlags
//  248  *
//  249  * @brief   Register an Application's EndPoint description.
//  250  *
//  251  * @param   epDesc - pointer to the Application's endpoint descriptor.
//  252  *
12345

af.s51 - 源码说明

本页面展示了「TI的基于ZIGBEE2006的协议栈」中的 af.s51 源码文件，采用 S51 编程语言编写，共 1,631 行代码。您可以在线阅读完整代码内容，也可以返回资源详情页下载完整源码包进行本地学习和开发。

虫虫开发者社区收录了大量与TI相关的技术资源，包括源代码、技术文档、电路图等，是电子工程师和嵌入式开发者的专业学习平台。

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?