zdprofile.s51

来自「TI的基于ZIGBEE2006的协议栈」· S51 代码 · 共 1,509 行 · 第 1/5 页

S51
1,509 行
字号
12345
        LCALL	?BANKED_ENTER_XDATA
        CFI DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        CFI R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI V6 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI V5 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI V4 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI V3 load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI V2 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI V1 load(1, XDATA, add(CFA_XSP16, literal(-12)))
        CFI V0 load(1, XDATA, add(CFA_XSP16, literal(-13)))
        CFI VB load(1, XDATA, add(CFA_XSP16, literal(-14)))
        CFI R6 load(1, XDATA, add(CFA_XSP16, literal(-15)))
        CFI CFA_SP SP+0
        CFI CFA_XSP16 add(XSP16, 15)
        ; Saved register size: 15
        ; Auto size: 4
        MOV	A,#-0x4
        LCALL	?ALLOC_XSTACK8
        CFI CFA_XSP16 add(XSP16, 19)
        MOV	?V0 + 0,R2
        MOV	?V0 + 1,R3
        MOV	A,#0x13
        LCALL	?XSTACK_DISP0_8
        LCALL	?Subroutine40 & 0xFFFF
//  120 #if ( AF_V1_SUPPORT )
//  121 
//  122   byte proVer = NLME_GetProtocolVersion();
//  123 #endif
//  124   afAddrType_t afAddr;
//  125 
//  126   ZADDR_TO_AFADDR( addr, afAddr );
??CrossCallReturnLabel_90:
        MOV	A,#0x3
        LCALL	?XSTACK_DISP0_8
        CLR	A
        MOVX	@DPTR,A
        MOV	DPL,R4
        MOV	DPH,R5
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        INC	DPTR
        MOVX	A,@DPTR
        PUSH	A
        CFI CFA_SP SP+-1
        MOV	A,#0x2
        LCALL	?XSTACK_DISP0_8
        POP	A
        CFI CFA_SP SP+0
        MOVX	@DPTR,A
        MOV	DPL,R4
        MOV	DPH,R5
        MOVX	A,@DPTR
        MOV	R2,A
        INC	DPTR
        MOVX	A,@DPTR
        MOV	R3,A
        MOV	DPL,?XSP + 0
        MOV	DPH,?XSP + 1
        MOV	A,R2
        MOVX	@DPTR,A
        INC	DPTR
        MOV	A,R3
        MOVX	@DPTR,A
//  127 
//  128 #if ( AF_V1_SUPPORT )
//  129   if ( proVer == ZB_PROT_V1_0 )
//  130   {
//  131     return ( afFillAndSendMessage( &afAddr, ZDP_AF_ENDPOINT, clusterID,
//  132                1, FRAMETYPE_MSG, transSeq,
//  133                NULL, NULL, NULL, NULL, len, ZDP_TmpBuf,
//  134                ZDP_TxOptions, FALSE, AF_DEFAULT_RADIUS ) );
//  135   }
//  136   else
//  137 #endif
//  138   {
//  139     *(ZDP_TmpBuf-1) = *transSeq;
        MOV	DPTR,#??ZDP_TmpBuf
        MOVX	A,@DPTR
        ADD	A,#-0x1
        MOV	?V0 + 4,A
        INC	DPTR
        MOVX	A,@DPTR
        ADDC	A,#-0x1
        MOV	?V0 + 5,A
        MOV	DPL,?V0 + 0
        MOV	DPH,?V0 + 1
        MOVX	A,@DPTR
        MOV	DPL,?V0 + 4
        MOV	DPH,?V0 + 5
        MOVX	@DPTR,A
//  140 
//  141     return AF_DataRequest( &afAddr, &ZDApp_epDesc, clusterID,
//  142                            (uint16)(len+1), (uint8*)(ZDP_TmpBuf-1),
//  143                            transSeq, ZDP_TxOptions,  AF_DEFAULT_RADIUS );
        ; Setup parameters for call to function AF_DataRequest
        MOV	?V0 + 6,#0xa
        MOV	R0,#?V0 + 6
        LCALL	?PUSH_XSTACK_I_ONE
        CFI CFA_XSP16 add(XSP16, 20)
        MOV	R0,#?V0 + 0
        LCALL	?PUSH_XSTACK_I_TWO
        CFI CFA_XSP16 add(XSP16, 22)
        MOV	R0,#?V0 + 4
        LCALL	?PUSH_XSTACK_I_TWO
        CFI CFA_XSP16 add(XSP16, 24)
        MOV	?V0 + 0,R1
        MOV	A,#0x1
        ADD	A,?V0 + 0
        MOV	?V0 + 0,A
        CLR	A
        ADDC	A,#0x0
        MOV	?V0 + 1,A
        MOV	R0,#?V0 + 0
        LCALL	?PUSH_XSTACK_I_TWO
        CFI CFA_XSP16 add(XSP16, 26)
        MOV	R0,#?V0 + 2
        LCALL	?PUSH_XSTACK_I_TWO
        CFI CFA_XSP16 add(XSP16, 28)
        MOV	DPTR,#??ZDP_TxOptions
        MOVX	A,@DPTR
        MOV	R1,A
        MOV	R4,#(ZDApp_epDesc & 0xff)
        MOV	R5,#((ZDApp_epDesc >> 8) & 0xff)
        MOV	A,#0x9
        LCALL	?XSTACK_DISP0_8
        MOV	R2,DPL
        MOV	R3,DPH
        MOV	DPTR,#(AF_DataRequest & 0xffff)
        MOV	A,#((AF_DataRequest >> 16) & 0xff)
        LCALL	?BCALL               ; Banked call to: DPTR()
        MOV	A,#0x9
        LCALL	?DEALLOC_XSTACK8
        CFI CFA_XSP16 add(XSP16, 19)
        MOV	A,#0x4
        CFI EndBlock cfiBlock0
        REQUIRE ?Subroutine55
        ; // Fall through to label ?Subroutine55
//  144   }
//  145 }

        RSEG BANKED_CODE:CODE:NOROOT(0)
?Subroutine55:
        CFI Block cfiBlock1 Using cfiCommon0
        CFI NoFunction
        CFI CFA_SP SP+0
        CFI CFA_XSP16 add(XSP16, 16)
        CFI VB load(1, XDATA, add(CFA_XSP16, literal(-14)))
        CFI DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI R6 load(1, XDATA, add(CFA_XSP16, literal(-15)))
        CFI R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI V0 load(1, XDATA, add(CFA_XSP16, literal(-13)))
        CFI V1 load(1, XDATA, add(CFA_XSP16, literal(-12)))
        CFI V2 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI V3 load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI V4 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI V5 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI V6 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        CFI Invalid
        LCALL	?DEALLOC_XSTACK8
        CFI CFA_XSP16 add(XSP16, 15)
        CFI Valid
        MOV	R7,#0x7
        LJMP	?BANKED_LEAVE_XDATA
        CFI EndBlock cfiBlock1
//  146 
//  147 /*********************************************************************
//  148  * @fn          ZDP_SendData
//  149  *
//  150  * @brief       This builds and send a request message that has
//  151  *              NWKAddrOfInterest as its only parameter.
//  152  *
//  153  * @param       dstAddr - destination address
//  154  * @param       cmd - clusterID
//  155  * @param       dataLen - number of bytes of data
//  156  * @param       data - pointer to the data
//  157  * @param       SecurityEnable - Security Options
//  158  *
//  159  * @return      afStatus_t
//  160  */

        RSEG BANKED_CODE:CODE:NOROOT(0)
//  161 afStatus_t ZDP_SendData( byte *TransSeq, zAddrType_t *dstAddr, uint16 cmd,
ZDP_SendData:
        CFI Block cfiBlock2 Using cfiCommon0
        CFI Function ZDP_SendData
//  162                         byte len, byte *buf, byte SecurityEnable )
//  163 {
        FUNCALL ZDP_SendData, ??fillAndSend
        LOCFRAME XSTACK, 16, STACK
        ARGFRAME XSTACK, 16, STACK
        MOV	A,#-0xe
        LCALL	?BANKED_ENTER_XDATA
        CFI DPH0 load(1, XDATA, add(CFA_XSP16, literal(-1)))
        CFI DPL0 load(1, XDATA, add(CFA_XSP16, literal(-2)))
        CFI ?BRET_EXT load(1, XDATA, add(CFA_XSP16, literal(-3)))
        CFI ?RET_HIGH load(1, XDATA, add(CFA_XSP16, literal(-4)))
        CFI ?RET_LOW load(1, XDATA, add(CFA_XSP16, literal(-5)))
        CFI R7 load(1, XDATA, add(CFA_XSP16, literal(-6)))
        CFI V5 load(1, XDATA, add(CFA_XSP16, literal(-7)))
        CFI V4 load(1, XDATA, add(CFA_XSP16, literal(-8)))
        CFI V3 load(1, XDATA, add(CFA_XSP16, literal(-9)))
        CFI V2 load(1, XDATA, add(CFA_XSP16, literal(-10)))
        CFI V1 load(1, XDATA, add(CFA_XSP16, literal(-11)))
        CFI V0 load(1, XDATA, add(CFA_XSP16, literal(-12)))
        CFI VB load(1, XDATA, add(CFA_XSP16, literal(-13)))
        CFI R6 load(1, XDATA, add(CFA_XSP16, literal(-14)))
        CFI CFA_SP SP+0
        CFI CFA_XSP16 add(XSP16, 14)
        ; Saved register size: 14
        ; Auto size: 0
        MOV	?V0 + 2,R1
        MOV	A,#0xe
        LCALL	?XSTACK_DISP0_8
        LCALL	??Subroutine16_0 & 0xFFFF
??CrossCallReturnLabel_40:
        MOV	A,#0x10
        LCALL	?XSTACK_DISP0_8
        LCALL	?Subroutine22 & 0xFFFF
??CrossCallReturnLabel_50:
        MOV	A,#0x12
        LCALL	?XSTACK_DISP0_8
        MOVX	A,@DPTR
        MOV	?V0 + 3,A
//  164   byte *pBuf = ZDP_TmpBuf;
        LCALL	?Subroutine10 & 0xFFFF
//  165   byte cnt = len;
??CrossCallReturnLabel_22:
        MOV	?V0 + 4,?V0 + 2
        SJMP	??ZDP_SendData_0
//  166 
//  167   while ( cnt-- )
//  168   {
//  169     *pBuf++ = *buf++;
??ZDP_SendData_1:
        LCALL	?Subroutine18 & 0xFFFF
??CrossCallReturnLabel_127:
        MOV	R6,DPL
        MOV	R7,DPH
        MOV	DPL,R0
        MOV	DPH,R1
        INC	DPTR
        MOV	R0,DPL
        MOV	R1,DPH
//  170   }
??ZDP_SendData_0:
        MOV	?V0 + 5,?V0 + 4
        MOV	A,#-0x1
        ADD	A,?V0 + 5
        MOV	?V0 + 4,A
        MOV	A,?V0 + 5
        JNZ	??ZDP_SendData_1
//  171 
//  172   FillAndSendTxOptions( TransSeq, dstAddr, cmd, len,
//  173                (AF_DEFAULT_RADIUS | ((SecurityEnable) ? AF_EN_SECURITY : 0)) );
        MOV	A,?V0 + 3
        JZ	??ZDP_SendData_2
        MOV	R0,#0x40
        SJMP	??ZDP_SendData_3
??ZDP_SendData_2:
        MOV	R0,#0x0
??ZDP_SendData_3:
        MOV	A,R0
        ORL	A,#0xa
        MOV	DPTR,#??ZDP_TxOptions
        MOVX	@DPTR,A
        ; Setup parameters for call to function fillAndSend
        MOV	R0,#?V0 + 0
        LCALL	?PUSH_XSTACK_I_TWO
        CFI CFA_XSP16 add(XSP16, 16)
        MOV	R1,?V0 + 2
        MOV	DPTR,#(??fillAndSend & 0xffff)
        MOV	A,#((??fillAndSend >> 16) & 0xff)
        LCALL	?BCALL               ; Banked call to: DPTR()
        MOV	A,#0x2
        LCALL	?DEALLOC_XSTACK8
        CFI CFA_XSP16 add(XSP16, 14)
        CLR	A
        MOV	DPTR,#??ZDP_TxOptions
        MOVX	@DPTR,A
        MOV	R7,#0x6
        LJMP	?BANKED_LEAVE_XDATA
        CFI EndBlock cfiBlock2
//  174 }
//  175 
//  176 #if defined ( ZDO_NODEDESC_REQUEST ) || defined ( ZDO_POWERDESC_REQUEST ) ||\ 
//  177     defined ( ZDO_ACTIVEEP_REQUEST ) || defined ( ZDO_COMPLEXDESC_REQUEST ) ||\ 
//  178     defined ( ZDO_USERDESC_REQUEST )
//  179 /*********************************************************************
//  180  * @fn          ZDP_NWKAddrOfInterestReq
12345

zdprofile.s51 - 源码说明

本页面展示了「TI的基于ZIGBEE2006的协议栈」中的 zdprofile.s51 源码文件，采用 S51 编程语言编写，共 1,509 行代码。您可以在线阅读完整代码内容，也可以返回资源详情页下载完整源码包进行本地学习和开发。

虫虫开发者社区收录了大量与TI相关的技术资源，包括源代码、技术文档、电路图等，是电子工程师和嵌入式开发者的专业学习平台。

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?