⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 actbl.h

📁 xen虚拟机源代码安装包
💻 H
字号:
/****************************************************************************** * * Name: actbl.h - Basic ACPI Table Definitions * *****************************************************************************//* * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions, and the following disclaimer, *    without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer *    substantially similar to the "NO WARRANTY" disclaimer below *    ("Disclaimer") and any redistribution must be conditioned upon *    including a substantially similar Disclaimer requirement for further *    binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names *    of any contributors may be used to endorse or promote products derived *    from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */#ifndef __ACTBL_H__#define __ACTBL_H__/* * Values for description table header signatures. Useful because they make * it more difficult to inadvertently type in the wrong signature. */#define ACPI_SIG_DSDT           "DSDT"	/* Differentiated System Description Table */#define ACPI_SIG_FADT           "FACP"	/* Fixed ACPI Description Table */#define ACPI_SIG_FACS           "FACS"	/* Firmware ACPI Control Structure */#define ACPI_SIG_PSDT           "PSDT"	/* Persistent System Description Table */#define ACPI_SIG_RSDP           "RSD PTR "	/* Root System Description Pointer */#define ACPI_SIG_RSDT           "RSDT"	/* Root System Description Table */#define ACPI_SIG_XSDT           "XSDT"	/* Extended  System Description Table */#define ACPI_SIG_SSDT           "SSDT"	/* Secondary System Description Table */#define ACPI_RSDP_NAME          "RSDP"	/* Short name for RSDP, not signature *//* * All tables and structures must be byte-packed to match the ACPI * specification, since the tables are provided by the system BIOS */#pragma pack(1)/* * These are the ACPI tables that are directly consumed by the subsystem. * * The RSDP and FACS do not use the common ACPI table header. All other ACPI * tables use the header. * * Note about bitfields: The u8 type is used for bitfields in ACPI tables. * This is the only type that is even remotely portable. Anything else is not * portable, so do not use any other bitfield types. *//******************************************************************************* * * ACPI Table Header. This common header is used by all tables except the * RSDP and FACS. The define is used for direct inclusion of header into * other ACPI tables * ******************************************************************************/struct acpi_table_header {	char signature[ACPI_NAME_SIZE];	/* ASCII table signature */	u32 length;		/* Length of table in bytes, including this header */	u8 revision;		/* ACPI Specification minor version # */	u8 checksum;		/* To make sum of entire table == 0 */	char oem_id[ACPI_OEM_ID_SIZE];	/* ASCII OEM identification */	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE];	/* ASCII OEM table identification */	u32 oem_revision;	/* OEM revision number */	char asl_compiler_id[ACPI_NAME_SIZE];	/* ASCII ASL compiler vendor ID */	u32 asl_compiler_revision;	/* ASL compiler version */};/* * GAS - Generic Address Structure (ACPI 2.0+) * * Note: Since this structure is used in the ACPI tables, it is byte aligned. * If misalignment is not supported, access to the Address field must be * performed with care. */struct acpi_generic_address {	u8 space_id;		/* Address space where struct or register exists */	u8 bit_width;		/* Size in bits of given register */	u8 bit_offset;		/* Bit offset within the register */	u8 access_width;	/* Minimum Access size (ACPI 3.0) */	u64 address;		/* 64-bit address of struct or register */};/******************************************************************************* * * RSDP - Root System Description Pointer (Signature is "RSD PTR ") * ******************************************************************************/struct acpi_table_rsdp {	char signature[8];	/* ACPI signature, contains "RSD PTR " */	u8 checksum;		/* ACPI 1.0 checksum */	char oem_id[ACPI_OEM_ID_SIZE];	/* OEM identification */	u8 revision;		/* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */	u32 rsdt_physical_address;	/* 32-bit physical address of the RSDT */	u32 length;		/* Table length in bytes, including header (ACPI 2.0+) */	u64 xsdt_physical_address;	/* 64-bit physical address of the XSDT (ACPI 2.0+) */	u8 extended_checksum;	/* Checksum of entire table (ACPI 2.0+) */	u8 reserved[3];		/* Reserved, must be zero */};#define ACPI_RSDP_REV0_SIZE     20	/* Size of original ACPI 1.0 RSDP *//******************************************************************************* * * RSDT/XSDT - Root System Description Tables * ******************************************************************************/struct acpi_table_rsdt {	struct acpi_table_header header;	/* Common ACPI table header */	u32 table_offset_entry[1];	/* Array of pointers to ACPI tables */};struct acpi_table_xsdt {	struct acpi_table_header header;	/* Common ACPI table header */	u64 table_offset_entry[1];	/* Array of pointers to ACPI tables */};/******************************************************************************* * * FACS - Firmware ACPI Control Structure (FACS) * ******************************************************************************/struct acpi_table_facs {	char signature[4];	/* ASCII table signature */	u32 length;		/* Length of structure, in bytes */	u32 hardware_signature;	/* Hardware configuration signature */	u32 firmware_waking_vector;	/* 32-bit physical address of the Firmware Waking Vector */	u32 global_lock;	/* Global Lock for shared hardware resources */	u32 flags;	u64 xfirmware_waking_vector;	/* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */	u8 version;		/* Version of this table (ACPI 2.0+) */	u8 reserved[31];	/* Reserved, must be zero */};/* Flag macros */#define ACPI_FACS_S4_BIOS_PRESENT (1)	/* 00: S4BIOS support is present *//* Global lock flags */#define ACPI_GLOCK_PENDING      0x01	/* 00: Pending global lock ownership */#define ACPI_GLOCK_OWNED        0x02	/* 01: Global lock is owned *//******************************************************************************* * * FADT - Fixed ACPI Description Table (Signature "FACP") * ******************************************************************************//* Fields common to all versions of the FADT */struct acpi_table_fadt {	struct acpi_table_header header;	/* Common ACPI table header */	u32 facs;		/* 32-bit physical address of FACS */	u32 dsdt;		/* 32-bit physical address of DSDT */	u8 model;		/* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */	u8 preferred_profile;	/* Conveys preferred power management profile to OSPM. */	u16 sci_interrupt;	/* System vector of SCI interrupt */	u32 smi_command;	/* 32-bit Port address of SMI command port */	u8 acpi_enable;		/* Value to write to smi_cmd to enable ACPI */	u8 acpi_disable;	/* Value to write to smi_cmd to disable ACPI */	u8 S4bios_request;	/* Value to write to SMI CMD to enter S4BIOS state */	u8 pstate_control;	/* Processor performance state control */	u32 pm1a_event_block;	/* 32-bit Port address of Power Mgt 1a Event Reg Blk */	u32 pm1b_event_block;	/* 32-bit Port address of Power Mgt 1b Event Reg Blk */	u32 pm1a_control_block;	/* 32-bit Port address of Power Mgt 1a Control Reg Blk */	u32 pm1b_control_block;	/* 32-bit Port address of Power Mgt 1b Control Reg Blk */	u32 pm2_control_block;	/* 32-bit Port address of Power Mgt 2 Control Reg Blk */	u32 pm_timer_block;	/* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */	u32 gpe0_block;		/* 32-bit Port address of General Purpose Event 0 Reg Blk */	u32 gpe1_block;		/* 32-bit Port address of General Purpose Event 1 Reg Blk */	u8 pm1_event_length;	/* Byte Length of ports at pm1x_event_block */	u8 pm1_control_length;	/* Byte Length of ports at pm1x_control_block */	u8 pm2_control_length;	/* Byte Length of ports at pm2_control_block */	u8 pm_timer_length;	/* Byte Length of ports at pm_timer_block */	u8 gpe0_block_length;	/* Byte Length of ports at gpe0_block */	u8 gpe1_block_length;	/* Byte Length of ports at gpe1_block */	u8 gpe1_base;		/* Offset in GPE number space where GPE1 events start */	u8 cst_control;		/* Support for the _CST object and C States change notification */	u16 C2latency;		/* Worst case HW latency to enter/exit C2 state */	u16 C3latency;		/* Worst case HW latency to enter/exit C3 state */	u16 flush_size;		/* Processor's memory cache line width, in bytes */	u16 flush_stride;	/* Number of flush strides that need to be read */	u8 duty_offset;		/* Processor duty cycle index in processor's P_CNT reg */	u8 duty_width;		/* Processor duty cycle value bit width in P_CNT register. */	u8 day_alarm;		/* Index to day-of-month alarm in RTC CMOS RAM */	u8 month_alarm;		/* Index to month-of-year alarm in RTC CMOS RAM */	u8 century;		/* Index to century in RTC CMOS RAM */	u16 boot_flags;		/* IA-PC Boot Architecture Flags. See Table 5-10 for description */	u8 reserved;		/* Reserved, must be zero */	u32 flags;		/* Miscellaneous flag bits (see below for individual flags) */	struct acpi_generic_address reset_register;	/* 64-bit address of the Reset register */	u8 reset_value;		/* Value to write to the reset_register port to reset the system */	u8 reserved4[3];	/* Reserved, must be zero */	u64 Xfacs;		/* 64-bit physical address of FACS */	u64 Xdsdt;		/* 64-bit physical address of DSDT */	struct acpi_generic_address xpm1a_event_block;	/* 64-bit Extended Power Mgt 1a Event Reg Blk address */	struct acpi_generic_address xpm1b_event_block;	/* 64-bit Extended Power Mgt 1b Event Reg Blk address */	struct acpi_generic_address xpm1a_control_block;	/* 64-bit Extended Power Mgt 1a Control Reg Blk address */	struct acpi_generic_address xpm1b_control_block;	/* 64-bit Extended Power Mgt 1b Control Reg Blk address */	struct acpi_generic_address xpm2_control_block;	/* 64-bit Extended Power Mgt 2 Control Reg Blk address */	struct acpi_generic_address xpm_timer_block;	/* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */	struct acpi_generic_address xgpe0_block;	/* 64-bit Extended General Purpose Event 0 Reg Blk address */	struct acpi_generic_address xgpe1_block;	/* 64-bit Extended General Purpose Event 1 Reg Blk address */};/* FADT flags */#define ACPI_FADT_WBINVD            (1)	/* 00: The wbinvd instruction works properly */#define ACPI_FADT_WBINVD_FLUSH      (1<<1)	/* 01: The wbinvd flushes but does not invalidate */#define ACPI_FADT_C1_SUPPORTED      (1<<2)	/* 02: All processors support C1 state */#define ACPI_FADT_C2_MP_SUPPORTED   (1<<3)	/* 03: C2 state works on MP system */#define ACPI_FADT_POWER_BUTTON      (1<<4)	/* 04: Power button is handled as a generic feature */#define ACPI_FADT_SLEEP_BUTTON      (1<<5)	/* 05: Sleep button is handled as a generic feature, or  not present */#define ACPI_FADT_FIXED_RTC         (1<<6)	/* 06: RTC wakeup stat not in fixed register space */#define ACPI_FADT_S4_RTC_WAKE       (1<<7)	/* 07: RTC wakeup stat not possible from S4 */#define ACPI_FADT_32BIT_TIMER       (1<<8)	/* 08: tmr_val is 32 bits 0=24-bits */#define ACPI_FADT_DOCKING_SUPPORTED (1<<9)	/* 09: Docking supported */#define ACPI_FADT_RESET_REGISTER    (1<<10)	/* 10: System reset via the FADT RESET_REG supported */#define ACPI_FADT_SEALED_CASE       (1<<11)	/* 11: No internal expansion capabilities and case is sealed */#define ACPI_FADT_HEADLESS          (1<<12)	/* 12: No local video capabilities or local input devices */#define ACPI_FADT_SLEEP_TYPE        (1<<13)	/* 13: Must execute native instruction after writing  SLP_TYPx register */#define ACPI_FADT_PCI_EXPRESS_WAKE  (1<<14)	/* 14: System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */#define ACPI_FADT_PLATFORM_CLOCK    (1<<15)	/* 15: OSPM should use platform-provided timer (ACPI 3.0) */#define ACPI_FADT_S4_RTC_VALID      (1<<16)	/* 16: Contents of RTC_STS valid after S4 wake (ACPI 3.0) */#define ACPI_FADT_REMOTE_POWER_ON   (1<<17)	/* 17: System is compatible with remote power on (ACPI 3.0) */#define ACPI_FADT_APIC_CLUSTER      (1<<18)	/* 18: All local APICs must use cluster model (ACPI 3.0) */#define ACPI_FADT_APIC_PHYSICAL     (1<<19)	/* 19: All local x_aPICs must use physical dest mode (ACPI 3.0) *//* * FADT Prefered Power Management Profiles */enum acpi_prefered_pm_profiles {	PM_UNSPECIFIED = 0,	PM_DESKTOP = 1,	PM_MOBILE = 2,	PM_WORKSTATION = 3,	PM_ENTERPRISE_SERVER = 4,	PM_SOHO_SERVER = 5,	PM_APPLIANCE_PC = 6};/* FADT Boot Arch Flags */#define BAF_LEGACY_DEVICES              0x0001#define BAF_8042_KEYBOARD_CONTROLLER    0x0002#define BAF_MSI_NOT_SUPPORTED           0x0008#define FADT2_REVISION_ID               3#define FADT2_MINUS_REVISION_ID         2/* Reset to default packing */#pragma pack()#define ACPI_FADT_OFFSET(f)             (u8) ACPI_OFFSET (struct acpi_table_fadt, f)/* * Get the remaining ACPI tables */#include <acpi/actbl1.h>#endif				/* __ACTBL_H__ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -