dom_fw.h

xen虚拟机源代码安装包

/*
 * Xen domain firmware emulation
 *
 * Copyright (C) 2004 Hewlett-Packard Co
 *	Dan Magenheimer ([e-mail])
 */

/* Portion of guest physical memory space reserved for PAL/SAL/EFI/ACPI
   data and code.  */
#define FW_BASE_PADDR		0x0000UL
/* It is assumed that FW_END_PADDR_MIN = FW_TABLES_END_PADDR_MIN */
#define FW_END_PADDR_MIN	0x3000UL

/* This is used to determined the portion of a domain's metaphysical memory
   space reserved for the hypercall patch table. */
/* Map:
   Index           Addr
   0x0000-0x000f   0x0000-0x00ff  : unused
   0x0010-0x001f   0x0100-0x01ff  : EFI
   0x0080-0x008f   0x0800-0x08ff  : PAL/SAL
   0x0090-0x009f   0x0900-0x09ff  : FPSWA
*/
#define	FW_HYPERCALL_BASE_PADDR 0x0000UL
#define	FW_HYPERCALL_END_PADDR  0X1000UL
#define	FW_HYPERCALL_PADDR(index) (FW_HYPERCALL_BASE_PADDR + (16UL * index))

/* Base and end guest physical address of ACPI tables.  */
#define FW_ACPI_BASE_PADDR	0x1000UL
#define FW_ACPI_END_PADDR	0x2000UL

/* Base and end guest physical address of EFI and SAL (non-ACPI) tables.  */
#define FW_TABLES_BASE_PADDR	0x2000UL
#define FW_TABLES_END_PADDR_MIN	0x3000UL


/* Hypercalls number have a low part and a high part.
   The high part is the class (xen/pal/sal/efi).  */
#define FW_HYPERCALL_NUM_MASK_HIGH	~0xffUL
#define FW_HYPERCALL_NUM_MASK_LOW	 0xffUL

/* Xen hypercalls are 0-63.  */
#define FW_HYPERCALL_XEN		0x0000UL

/* Define some faster and lighter hypercalls.
   See definitions in arch-ia64.h */
#define FW_HYPERCALL_XEN_FAST		0x0200UL

/*
 * PAL can be called in physical or virtual mode simply by
 * branching to pal_entry_point, which is found in one of the
 * SAL system table entrypoint descriptors (type=0).  Parameters
 * may be passed in r28-r31 (static) or r32-r35 (stacked); which
 * convention is used depends on which procedure is being called.
 * r28 contains the PAL index, the indicator of which PAL procedure
 * is to be called: Index=0 is reserved, 1-255 indicates static
 * parameters, 256-511 indicates stacked parameters.  512-1023
 * are implementation-specific and 1024+ are reserved.
 * rp=b0 indicates the return point.
 *
 * A single hypercall is used for all PAL calls.
 * The hypercall stub is xen_ia64_pal_call_stub (dom_fw_asm.S). 
 * Its size is 2 bundles.
 */

#define FW_HYPERCALL_PAL_CALL_INDEX	0x80UL
#define FW_HYPERCALL_PAL_CALL_PADDR	FW_HYPERCALL_PADDR(FW_HYPERCALL_PAL_CALL_INDEX)
#define FW_HYPERCALL_PAL_CALL		0x1000UL

/*
 * SAL consists of a table of descriptors, one of which (type=0)
 * contains a sal_entry_point which provides access to a number of
 * functions.  Parameters are passed in r33-r39; r32 contains the
 * index of the SAL function being called. At entry, r1=gp contains
 * a global pointer which may be needed by the function.  rp=b0
 * indicates the return point.  SAL may not be re-entrant; an
 * OS must ensure it is called by one processor at a time.
 *
 * A single hypercall is used for all SAL calls.
 */

#define FW_HYPERCALL_SAL_CALL_INDEX	0x82UL
#define FW_HYPERCALL_SAL_CALL_PADDR	FW_HYPERCALL_PADDR(FW_HYPERCALL_SAL_CALL_INDEX)
#define FW_HYPERCALL_SAL_CALL		0x1100UL

/* SAL return point.  */
#define FW_HYPERCALL_SAL_RETURN_INDEX	0x84UL
#define FW_HYPERCALL_SAL_RETURN_PADDR	FW_HYPERCALL_PADDR(FW_HYPERCALL_SAL_RETURN_INDEX)
#define FW_HYPERCALL_SAL_RETURN		0x1200UL

/*
 * EFI is accessed via the EFI system table, which contains:
 * - a header which contains version info
 * - console information (stdin,stdout,stderr)
 * as well as pointers to:
 * - the EFI configuration table, which contains GUID/pointer pairs,
 *   one of which is a pointer to the SAL system table; another is
 *   a pointer to the ACPI table
 * - the runtime services table, which contains a header followed by
 *   a list of (11) unique "runtime" entry points.  EFI runtime entry
 *   points are real function descriptors so contain both a (physical)
 *   address and a global pointer.  They are entered (at first) in
 *   physical mode, though it is possible (optionally... requests can
 *   be ignored and calls still must be OK) to call one entry point
 *   which switches the others so they are capable of being called in
 *   virtual mode.  Parameters are passed in stacked registers, and
 *   rp=b0 indicates the return point.
 * - the boot services table, which contains bootloader-related
 *   entry points (ADD MORE HERE LATER)
 *
 * Each runtime (and boot) entry point requires a unique hypercall.
 */

/* these are indexes into the runtime services table */
#define FW_HYPERCALL_EFI_GET_TIME_INDEX			0x10UL
#define FW_HYPERCALL_EFI_SET_TIME_INDEX			0x11UL
#define FW_HYPERCALL_EFI_GET_WAKEUP_TIME_INDEX		0x12UL
#define FW_HYPERCALL_EFI_SET_WAKEUP_TIME_INDEX		0x13UL
#define FW_HYPERCALL_EFI_SET_VIRTUAL_ADDRESS_MAP_INDEX	0x14UL
#define FW_HYPERCALL_EFI_GET_VARIABLE_INDEX		0x15UL
#define FW_HYPERCALL_EFI_GET_NEXT_VARIABLE_INDEX	0x16UL
#define FW_HYPERCALL_EFI_SET_VARIABLE_INDEX		0x17UL
#define FW_HYPERCALL_EFI_GET_NEXT_HIGH_MONO_COUNT_INDEX	0x18UL
#define FW_HYPERCALL_EFI_RESET_SYSTEM_INDEX		0x19UL

/* these are hypercall numbers */
#define FW_HYPERCALL_EFI_CALL				0x300UL
#define FW_HYPERCALL_EFI_GET_TIME			0x300UL
#define FW_HYPERCALL_EFI_SET_TIME			0x301UL
#define FW_HYPERCALL_EFI_GET_WAKEUP_TIME		0x302UL
#define FW_HYPERCALL_EFI_SET_WAKEUP_TIME		0x303UL
#define FW_HYPERCALL_EFI_SET_VIRTUAL_ADDRESS_MAP	0x304UL
#define FW_HYPERCALL_EFI_GET_VARIABLE			0x305UL
#define FW_HYPERCALL_EFI_GET_NEXT_VARIABLE		0x306UL
#define FW_HYPERCALL_EFI_SET_VARIABLE			0x307UL
#define FW_HYPERCALL_EFI_GET_NEXT_HIGH_MONO_COUNT	0x308UL
#define FW_HYPERCALL_EFI_RESET_SYSTEM			0x309UL

/* these are the physical addresses of the pseudo-entry points that
 * contain the hypercalls */
#define FW_HYPERCALL_EFI_GET_TIME_PADDR			FW_HYPERCALL_PADDR(FW_HYPERCALL_EFI_GET_TIME_INDEX)
#define FW_HYPERCALL_EFI_SET_TIME_PADDR			FW_HYPERCALL_PADDR(FW_HYPERCALL_EFI_SET_TIME_INDEX)
#define FW_HYPERCALL_EFI_GET_WAKEUP_TIME_PADDR		FW_HYPERCALL_PADDR(FW_HYPERCALL_EFI_GET_WAKEUP_TIME_INDEX)
#define FW_HYPERCALL_EFI_SET_WAKEUP_TIME_PADDR		FW_HYPERCALL_PADDR(FW_HYPERCALL_EFI_SET_WAKEUP_TIME_INDEX)
#define FW_HYPERCALL_EFI_SET_VIRTUAL_ADDRESS_MAP_PADDR	FW_HYPERCALL_PADDR(FW_HYPERCALL_EFI_SET_VIRTUAL_ADDRESS_MAP_INDEX)
#define FW_HYPERCALL_EFI_GET_VARIABLE_PADDR		FW_HYPERCALL_PADDR(FW_HYPERCALL_EFI_GET_VARIABLE_INDEX)
#define FW_HYPERCALL_EFI_GET_NEXT_VARIABLE_PADDR	FW_HYPERCALL_PADDR(FW_HYPERCALL_EFI_GET_NEXT_VARIABLE_INDEX)
#define FW_HYPERCALL_EFI_SET_VARIABLE_PADDR		FW_HYPERCALL_PADDR(FW_HYPERCALL_EFI_SET_VARIABLE_INDEX)
#define FW_HYPERCALL_EFI_GET_NEXT_HIGH_MONO_COUNT_PADDR	FW_HYPERCALL_PADDR(FW_HYPERCALL_EFI_GET_NEXT_HIGH_MONO_COUNT_INDEX)
#define FW_HYPERCALL_EFI_RESET_SYSTEM_PADDR		FW_HYPERCALL_PADDR(FW_HYPERCALL_EFI_RESET_SYSTEM_INDEX)

/*
 * This is a hypercall number for IPI.
 * A pseudo-entry-point is not presented to IPI hypercall. This hypercall number 
 * is used in xen_send_ipi of linux-2.6-xen-sparse/arch/ia64/xen/hypercall.S.
 */
#define FW_HYPERCALL_IPI				0x400UL

/*
 * This is a hypercall number for FPSWA.
 * FPSWA hypercall uses 2 bundles for a pseudo-entry-point and a hypercall-patch.
 */
#define FW_HYPERCALL_FPSWA_ENTRY_INDEX			0x90UL
#define FW_HYPERCALL_FPSWA_PATCH_INDEX			0x91UL
#define FW_HYPERCALL_FPSWA_ENTRY_PADDR			FW_HYPERCALL_PADDR(FW_HYPERCALL_FPSWA_ENTRY_INDEX)
#define FW_HYPERCALL_FPSWA_PATCH_PADDR			FW_HYPERCALL_PADDR(FW_HYPERCALL_FPSWA_PATCH_INDEX)
#define FW_HYPERCALL_FPSWA				0x500UL

/* Set the shared_info base virtual address.  */
#define FW_HYPERCALL_SET_SHARED_INFO_VA			0x600UL

/* Hvmstub hypercalls.  See details in hvm_stub.h  */
#define FW_HYPERCALL_SIOEMU				0x800UL

/* Hypercalls index bellow _FIRST_ARCH are reserved by Xen, while those above
   are for the architecture.
   Note: this limit was defined by Xen/ia64 (and not by Xen).
     This can be renumbered safely.
*/
#define FW_HYPERCALL_FIRST_ARCH		0x300UL

/* Interrupt vector used for os boot rendez vous.  */
#define XEN_SAL_BOOT_RENDEZ_VEC	0xF3

#define EFI_MEMDESC_VERSION		1

/* Additionnal OEM SAL.  */
#define SAL_XEN_SAL_RETURN	0x02000000

#ifdef __XEN__
#include <linux/efi.h>
extern struct ia64_pal_retval xen_pal_emulator(u64, u64, u64, u64);
extern struct sal_ret_values sal_emulator (long index, unsigned long in1, unsigned long in2, unsigned long in3, unsigned long in4, unsigned long in5, unsigned long in6, unsigned long in7);
extern struct ia64_pal_retval pal_emulator_static (unsigned long);
extern efi_status_t efi_emulator (struct pt_regs *regs, unsigned long *fault);

extern int dom_fw_setup (struct domain *, unsigned long bp_mpa, unsigned long maxmem);
#endif