⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 twl92230.c

📁 xen虚拟机源代码安装包
💻 C
📖 第 1 页 / 共 2 页
字号:
/* * TI TWL92230C energy-management companion device for the OMAP24xx. * Aka. Menelaus (N4200 MENELAUS1_V2.2) * * Copyright (C) 2008 Nokia Corporation * Written by Andrzej Zaborowski <andrew@openedhand.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 or * (at your option) version 3 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include "hw.h"#include "qemu-timer.h"#include "i2c.h"#include "sysemu.h"#include "console.h"#define VERBOSE 1struct menelaus_s {    i2c_slave i2c;    qemu_irq irq;    int firstbyte;    uint8_t reg;    uint8_t vcore[5];    uint8_t dcdc[3];    uint8_t ldo[8];    uint8_t sleep[2];    uint8_t osc;    uint8_t detect;    uint16_t mask;    uint16_t status;    uint8_t dir;    uint8_t inputs;    uint8_t outputs;    uint8_t bbsms;    uint8_t pull[4];    uint8_t mmc_ctrl[3];    uint8_t mmc_debounce;    struct {        uint8_t ctrl;        uint16_t comp;        QEMUTimer *hz;        int64_t next;        struct tm tm;        struct tm new;        struct tm alm;        int sec_offset;        int alm_sec;        int next_comp;    } rtc;    qemu_irq handler[3];    qemu_irq *in;    int pwrbtn_state;    qemu_irq pwrbtn;};static inline void menelaus_update(struct menelaus_s *s){    qemu_set_irq(s->irq, s->status & ~s->mask);}static inline void menelaus_rtc_start(struct menelaus_s *s){    s->rtc.next =+ qemu_get_clock(rt_clock);    qemu_mod_timer(s->rtc.hz, s->rtc.next);}static inline void menelaus_rtc_stop(struct menelaus_s *s){    qemu_del_timer(s->rtc.hz);    s->rtc.next =- qemu_get_clock(rt_clock);    if (s->rtc.next < 1)        s->rtc.next = 1;}static void menelaus_rtc_update(struct menelaus_s *s){    qemu_get_timedate(&s->rtc.tm, s->rtc.sec_offset);}static void menelaus_alm_update(struct menelaus_s *s){    if ((s->rtc.ctrl & 3) == 3)        s->rtc.alm_sec = qemu_timedate_diff(&s->rtc.alm) - s->rtc.sec_offset;}static void menelaus_rtc_hz(void *opaque){    struct menelaus_s *s = (struct menelaus_s *) opaque;    s->rtc.next_comp --;    s->rtc.alm_sec --;    s->rtc.next += 1000;    qemu_mod_timer(s->rtc.hz, s->rtc.next);    if ((s->rtc.ctrl >> 3) & 3) {				/* EVERY */        menelaus_rtc_update(s);        if (((s->rtc.ctrl >> 3) & 3) == 1 && !s->rtc.tm.tm_sec)            s->status |= 1 << 8;				/* RTCTMR */        else if (((s->rtc.ctrl >> 3) & 3) == 2 && !s->rtc.tm.tm_min)            s->status |= 1 << 8;				/* RTCTMR */        else if (!s->rtc.tm.tm_hour)            s->status |= 1 << 8;				/* RTCTMR */    } else        s->status |= 1 << 8;					/* RTCTMR */    if ((s->rtc.ctrl >> 1) & 1) {				/* RTC_AL_EN */        if (s->rtc.alm_sec == 0)            s->status |= 1 << 9;				/* RTCALM */        /* TODO: wake-up */    }    if (s->rtc.next_comp <= 0) {        s->rtc.next -= muldiv64((int16_t) s->rtc.comp, 1000, 0x8000);        s->rtc.next_comp = 3600;    }    menelaus_update(s);}void menelaus_reset(i2c_slave *i2c){    struct menelaus_s *s = (struct menelaus_s *) i2c;    s->reg = 0x00;    s->vcore[0] = 0x0c;	/* XXX: X-loader needs 0x8c? check!  */    s->vcore[1] = 0x05;    s->vcore[2] = 0x02;    s->vcore[3] = 0x0c;    s->vcore[4] = 0x03;    s->dcdc[0] = 0x33;	/* Depends on wiring */    s->dcdc[1] = 0x03;    s->dcdc[2] = 0x00;    s->ldo[0] = 0x95;    s->ldo[1] = 0x7e;    s->ldo[2] = 0x00;    s->ldo[3] = 0x00;	/* Depends on wiring */    s->ldo[4] = 0x03;	/* Depends on wiring */    s->ldo[5] = 0x00;    s->ldo[6] = 0x00;    s->ldo[7] = 0x00;    s->sleep[0] = 0x00;    s->sleep[1] = 0x00;    s->osc = 0x01;    s->detect = 0x09;    s->mask = 0x0fff;    s->status = 0;    s->dir = 0x07;    s->outputs = 0x00;    s->bbsms = 0x00;    s->pull[0] = 0x00;    s->pull[1] = 0x00;    s->pull[2] = 0x00;    s->pull[3] = 0x00;    s->mmc_ctrl[0] = 0x03;    s->mmc_ctrl[1] = 0xc0;    s->mmc_ctrl[2] = 0x00;    s->mmc_debounce = 0x05;    if (s->rtc.ctrl & 1)        menelaus_rtc_stop(s);    s->rtc.ctrl = 0x00;    s->rtc.comp = 0x0000;    s->rtc.next = 1000;    s->rtc.sec_offset = 0;    s->rtc.next_comp = 1800;    s->rtc.alm_sec = 1800;    s->rtc.alm.tm_sec = 0x00;    s->rtc.alm.tm_min = 0x00;    s->rtc.alm.tm_hour = 0x00;    s->rtc.alm.tm_mday = 0x01;    s->rtc.alm.tm_mon = 0x00;    s->rtc.alm.tm_year = 2004;    menelaus_update(s);}static inline uint8_t to_bcd(int val){    return ((val / 10) << 4) | (val % 10);}static inline int from_bcd(uint8_t val){    return ((val >> 4) * 10) + (val & 0x0f);}static void menelaus_gpio_set(void *opaque, int line, int level){    struct menelaus_s *s = (struct menelaus_s *) opaque;    /* No interrupt generated */    s->inputs &= ~(1 << line);    s->inputs |= level << line;}static void menelaus_pwrbtn_set(void *opaque, int line, int level){    struct menelaus_s *s = (struct menelaus_s *) opaque;    if (!s->pwrbtn_state && level) {        s->status |= 1 << 11;					/* PSHBTN */        menelaus_update(s);    }    s->pwrbtn_state = level;}#define MENELAUS_REV		0x01#define MENELAUS_VCORE_CTRL1	0x02#define MENELAUS_VCORE_CTRL2	0x03#define MENELAUS_VCORE_CTRL3	0x04#define MENELAUS_VCORE_CTRL4	0x05#define MENELAUS_VCORE_CTRL5	0x06#define MENELAUS_DCDC_CTRL1	0x07#define MENELAUS_DCDC_CTRL2	0x08#define MENELAUS_DCDC_CTRL3	0x09#define MENELAUS_LDO_CTRL1	0x0a#define MENELAUS_LDO_CTRL2	0x0b#define MENELAUS_LDO_CTRL3	0x0c#define MENELAUS_LDO_CTRL4	0x0d#define MENELAUS_LDO_CTRL5	0x0e#define MENELAUS_LDO_CTRL6	0x0f#define MENELAUS_LDO_CTRL7	0x10#define MENELAUS_LDO_CTRL8	0x11#define MENELAUS_SLEEP_CTRL1	0x12#define MENELAUS_SLEEP_CTRL2	0x13#define MENELAUS_DEVICE_OFF	0x14#define MENELAUS_OSC_CTRL	0x15#define MENELAUS_DETECT_CTRL	0x16#define MENELAUS_INT_MASK1	0x17#define MENELAUS_INT_MASK2	0x18#define MENELAUS_INT_STATUS1	0x19#define MENELAUS_INT_STATUS2	0x1a#define MENELAUS_INT_ACK1	0x1b#define MENELAUS_INT_ACK2	0x1c#define MENELAUS_GPIO_CTRL	0x1d#define MENELAUS_GPIO_IN	0x1e#define MENELAUS_GPIO_OUT	0x1f#define MENELAUS_BBSMS		0x20#define MENELAUS_RTC_CTRL	0x21#define MENELAUS_RTC_UPDATE	0x22#define MENELAUS_RTC_SEC	0x23#define MENELAUS_RTC_MIN	0x24#define MENELAUS_RTC_HR		0x25#define MENELAUS_RTC_DAY	0x26#define MENELAUS_RTC_MON	0x27#define MENELAUS_RTC_YR		0x28#define MENELAUS_RTC_WKDAY	0x29#define MENELAUS_RTC_AL_SEC	0x2a#define MENELAUS_RTC_AL_MIN	0x2b#define MENELAUS_RTC_AL_HR	0x2c#define MENELAUS_RTC_AL_DAY	0x2d#define MENELAUS_RTC_AL_MON	0x2e#define MENELAUS_RTC_AL_YR	0x2f#define MENELAUS_RTC_COMP_MSB	0x30#define MENELAUS_RTC_COMP_LSB	0x31#define MENELAUS_S1_PULL_EN	0x32#define MENELAUS_S1_PULL_DIR	0x33#define MENELAUS_S2_PULL_EN	0x34#define MENELAUS_S2_PULL_DIR	0x35#define MENELAUS_MCT_CTRL1	0x36#define MENELAUS_MCT_CTRL2	0x37#define MENELAUS_MCT_CTRL3	0x38#define MENELAUS_MCT_PIN_ST	0x39#define MENELAUS_DEBOUNCE1	0x3astatic uint8_t menelaus_read(void *opaque, uint8_t addr){    struct menelaus_s *s = (struct menelaus_s *) opaque;    int reg = 0;    switch (addr) {    case MENELAUS_REV:        return 0x22;    case MENELAUS_VCORE_CTRL5: reg ++;    case MENELAUS_VCORE_CTRL4: reg ++;    case MENELAUS_VCORE_CTRL3: reg ++;    case MENELAUS_VCORE_CTRL2: reg ++;    case MENELAUS_VCORE_CTRL1:        return s->vcore[reg];    case MENELAUS_DCDC_CTRL3: reg ++;    case MENELAUS_DCDC_CTRL2: reg ++;    case MENELAUS_DCDC_CTRL1:        return s->dcdc[reg];    case MENELAUS_LDO_CTRL8: reg ++;    case MENELAUS_LDO_CTRL7: reg ++;    case MENELAUS_LDO_CTRL6: reg ++;    case MENELAUS_LDO_CTRL5: reg ++;    case MENELAUS_LDO_CTRL4: reg ++;    case MENELAUS_LDO_CTRL3: reg ++;    case MENELAUS_LDO_CTRL2: reg ++;    case MENELAUS_LDO_CTRL1:        return s->ldo[reg];    case MENELAUS_SLEEP_CTRL2: reg ++;    case MENELAUS_SLEEP_CTRL1:        return s->sleep[reg];    case MENELAUS_DEVICE_OFF:        return 0;    case MENELAUS_OSC_CTRL:        return s->osc | (1 << 7);			/* CLK32K_GOOD */    case MENELAUS_DETECT_CTRL:        return s->detect;    case MENELAUS_INT_MASK1:        return (s->mask >> 0) & 0xff;    case MENELAUS_INT_MASK2:        return (s->mask >> 8) & 0xff;    case MENELAUS_INT_STATUS1:        return (s->status >> 0) & 0xff;    case MENELAUS_INT_STATUS2:        return (s->status >> 8) & 0xff;    case MENELAUS_INT_ACK1:    case MENELAUS_INT_ACK2:        return 0;    case MENELAUS_GPIO_CTRL:        return s->dir;    case MENELAUS_GPIO_IN:        return s->inputs | (~s->dir & s->outputs);    case MENELAUS_GPIO_OUT:        return s->outputs;    case MENELAUS_BBSMS:        return s->bbsms;    case MENELAUS_RTC_CTRL:        return s->rtc.ctrl;    case MENELAUS_RTC_UPDATE:        return 0x00;    case MENELAUS_RTC_SEC:        menelaus_rtc_update(s);        return to_bcd(s->rtc.tm.tm_sec);    case MENELAUS_RTC_MIN:        menelaus_rtc_update(s);        return to_bcd(s->rtc.tm.tm_min);    case MENELAUS_RTC_HR:        menelaus_rtc_update(s);        if ((s->rtc.ctrl >> 2) & 1)			/* MODE12_n24 */            return to_bcd((s->rtc.tm.tm_hour % 12) + 1) |                    (!!(s->rtc.tm.tm_hour >= 12) << 7);	/* PM_nAM */        else            return to_bcd(s->rtc.tm.tm_hour);    case MENELAUS_RTC_DAY:        menelaus_rtc_update(s);        return to_bcd(s->rtc.tm.tm_mday);    case MENELAUS_RTC_MON:        menelaus_rtc_update(s);        return to_bcd(s->rtc.tm.tm_mon + 1);    case MENELAUS_RTC_YR:        menelaus_rtc_update(s);        return to_bcd(s->rtc.tm.tm_year - 2000);    case MENELAUS_RTC_WKDAY:        menelaus_rtc_update(s);        return to_bcd(s->rtc.tm.tm_wday);    case MENELAUS_RTC_AL_SEC:        return to_bcd(s->rtc.alm.tm_sec);    case MENELAUS_RTC_AL_MIN:        return to_bcd(s->rtc.alm.tm_min);    case MENELAUS_RTC_AL_HR:        if ((s->rtc.ctrl >> 2) & 1)			/* MODE12_n24 */            return to_bcd((s->rtc.alm.tm_hour % 12) + 1) |                    (!!(s->rtc.alm.tm_hour >= 12) << 7);/* AL_PM_nAM */        else            return to_bcd(s->rtc.alm.tm_hour);    case MENELAUS_RTC_AL_DAY:        return to_bcd(s->rtc.alm.tm_mday);    case MENELAUS_RTC_AL_MON:        return to_bcd(s->rtc.alm.tm_mon + 1);    case MENELAUS_RTC_AL_YR:        return to_bcd(s->rtc.alm.tm_year - 2000);    case MENELAUS_RTC_COMP_MSB:        return (s->rtc.comp >> 8) & 0xff;    case MENELAUS_RTC_COMP_LSB:        return (s->rtc.comp >> 0) & 0xff;    case MENELAUS_S1_PULL_EN:        return s->pull[0];    case MENELAUS_S1_PULL_DIR:        return s->pull[1];    case MENELAUS_S2_PULL_EN:        return s->pull[2];    case MENELAUS_S2_PULL_DIR:        return s->pull[3];    case MENELAUS_MCT_CTRL3: reg ++;    case MENELAUS_MCT_CTRL2: reg ++;    case MENELAUS_MCT_CTRL1:        return s->mmc_ctrl[reg];    case MENELAUS_MCT_PIN_ST:        /* TODO: return the real Card Detect */        return 0;    case MENELAUS_DEBOUNCE1:        return s->mmc_debounce;    default:#ifdef VERBOSE        printf("%s: unknown register %02x\n", __FUNCTION__, addr);#endif        break;    }    return 0;}static void menelaus_write(void *opaque, uint8_t addr, uint8_t value){    struct menelaus_s *s = (struct menelaus_s *) opaque;    int line;    int reg = 0;    struct tm tm;    switch (addr) {    case MENELAUS_VCORE_CTRL1:        s->vcore[0] = (value & 0xe) | MIN(value & 0x1f, 0x12);        break;    case MENELAUS_VCORE_CTRL2:        s->vcore[1] = value;        break;    case MENELAUS_VCORE_CTRL3:        s->vcore[2] = MIN(value & 0x1f, 0x12);        break;    case MENELAUS_VCORE_CTRL4:        s->vcore[3] = MIN(value & 0x1f, 0x12);        break;    case MENELAUS_VCORE_CTRL5:        s->vcore[4] = value & 3;        /* XXX         * auto set to 3 on M_Active, nRESWARM         * auto set to 0 on M_WaitOn, M_Backup         */        break;    case MENELAUS_DCDC_CTRL1:        s->dcdc[0] = value & 0x3f;        break;    case MENELAUS_DCDC_CTRL2:        s->dcdc[1] = value & 0x07;        /* XXX         * auto set to 3 on M_Active, nRESWARM         * auto set to 0 on M_WaitOn, M_Backup         */        break;

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -