wm8750.c
来自「xen虚拟机源代码安装包」· C语言 代码 · 共 736 行 · 第 1/2 页
C
736 行
/* * WM8750 audio CODEC. * * Copyright (c) 2006 Openedhand Ltd. * Written by Andrzej Zaborowski <balrog@zabor.org> * * This file is licensed under GNU GPL. */#include "hw.h"#include "i2c.h"#include "audio/audio.h"#define IN_PORT_N 3#define OUT_PORT_N 3#define CODEC "wm8750"struct wm_rate_s;struct wm8750_s { i2c_slave i2c; uint8_t i2c_data[2]; int i2c_len; QEMUSoundCard card; SWVoiceIn *adc_voice[IN_PORT_N]; SWVoiceOut *dac_voice[OUT_PORT_N]; int enable; void (*data_req)(void *, int, int); void *opaque; uint8_t data_in[4096]; uint8_t data_out[4096]; int idx_in, req_in; int idx_out, req_out; SWVoiceOut **out[2]; uint8_t outvol[7], outmute[2]; SWVoiceIn **in[2]; uint8_t invol[4], inmute[2]; uint8_t diff[2], pol, ds, monomix[2], alc, mute; uint8_t path[4], mpath[2], power, format; const struct wm_rate_s *rate; int adc_hz, dac_hz, ext_adc_hz, ext_dac_hz, master;};/* pow(10.0, -i / 20.0) * 255, i = 0..42 */static const uint8_t wm8750_vol_db_table[] = { 255, 227, 203, 181, 161, 143, 128, 114, 102, 90, 81, 72, 64, 57, 51, 45, 40, 36, 32, 29, 26, 23, 20, 18, 16, 14, 13, 11, 10, 9, 8, 7, 6, 6, 5, 5, 4, 4, 3, 3, 3, 2, 2};#define WM8750_OUTVOL_TRANSFORM(x) wm8750_vol_db_table[(0x7f - x) / 3]#define WM8750_INVOL_TRANSFORM(x) (x << 2)static inline void wm8750_in_load(struct wm8750_s *s){ int acquired; if (s->idx_in + s->req_in <= sizeof(s->data_in)) return; s->idx_in = audio_MAX(0, (int) sizeof(s->data_in) - s->req_in); acquired = AUD_read(*s->in[0], s->data_in + s->idx_in, sizeof(s->data_in) - s->idx_in);}static inline void wm8750_out_flush(struct wm8750_s *s){ int sent = 0; while (sent < s->idx_out) sent += AUD_write(*s->out[0], s->data_out + sent, s->idx_out - sent) ?: s->idx_out; s->idx_out = 0;}static void wm8750_audio_in_cb(void *opaque, int avail_b){ struct wm8750_s *s = (struct wm8750_s *) opaque; s->req_in = avail_b; s->data_req(s->opaque, s->req_out >> 2, avail_b >> 2);}static void wm8750_audio_out_cb(void *opaque, int free_b){ struct wm8750_s *s = (struct wm8750_s *) opaque; if (s->idx_out >= free_b) { s->idx_out = free_b; s->req_out = 0; wm8750_out_flush(s); } else s->req_out = free_b - s->idx_out; s->data_req(s->opaque, s->req_out >> 2, s->req_in >> 2);}struct wm_rate_s { int adc; int adc_hz; int dac; int dac_hz;};static const struct wm_rate_s wm_rate_table[] = { { 256, 48000, 256, 48000 }, /* SR: 00000 */ { 384, 48000, 384, 48000 }, /* SR: 00001 */ { 256, 48000, 1536, 8000 }, /* SR: 00010 */ { 384, 48000, 2304, 8000 }, /* SR: 00011 */ { 1536, 8000, 256, 48000 }, /* SR: 00100 */ { 2304, 8000, 384, 48000 }, /* SR: 00101 */ { 1536, 8000, 1536, 8000 }, /* SR: 00110 */ { 2304, 8000, 2304, 8000 }, /* SR: 00111 */ { 1024, 12000, 1024, 12000 }, /* SR: 01000 */ { 1526, 12000, 1536, 12000 }, /* SR: 01001 */ { 768, 16000, 768, 16000 }, /* SR: 01010 */ { 1152, 16000, 1152, 16000 }, /* SR: 01011 */ { 384, 32000, 384, 32000 }, /* SR: 01100 */ { 576, 32000, 576, 32000 }, /* SR: 01101 */ { 128, 96000, 128, 96000 }, /* SR: 01110 */ { 192, 96000, 192, 96000 }, /* SR: 01111 */ { 256, 44100, 256, 44100 }, /* SR: 10000 */ { 384, 44100, 384, 44100 }, /* SR: 10001 */ { 256, 44100, 1408, 8018 }, /* SR: 10010 */ { 384, 44100, 2112, 8018 }, /* SR: 10011 */ { 1408, 8018, 256, 44100 }, /* SR: 10100 */ { 2112, 8018, 384, 44100 }, /* SR: 10101 */ { 1408, 8018, 1408, 8018 }, /* SR: 10110 */ { 2112, 8018, 2112, 8018 }, /* SR: 10111 */ { 1024, 11025, 1024, 11025 }, /* SR: 11000 */ { 1536, 11025, 1536, 11025 }, /* SR: 11001 */ { 512, 22050, 512, 22050 }, /* SR: 11010 */ { 768, 22050, 768, 22050 }, /* SR: 11011 */ { 512, 24000, 512, 24000 }, /* SR: 11100 */ { 768, 24000, 768, 24000 }, /* SR: 11101 */ { 128, 88200, 128, 88200 }, /* SR: 11110 */ { 192, 88200, 192, 88200 }, /* SR: 11111 */};static void wm8750_vol_update(struct wm8750_s *s){ /* FIXME: multiply all volumes by s->invol[2], s->invol[3] */ AUD_set_volume_in(s->adc_voice[0], s->mute, s->inmute[0] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[0]), s->inmute[1] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[1])); AUD_set_volume_in(s->adc_voice[1], s->mute, s->inmute[0] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[0]), s->inmute[1] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[1])); AUD_set_volume_in(s->adc_voice[2], s->mute, s->inmute[0] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[0]), s->inmute[1] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[1])); /* FIXME: multiply all volumes by s->outvol[0], s->outvol[1] */ /* Speaker: LOUT2VOL ROUT2VOL */ AUD_set_volume_out(s->dac_voice[0], s->mute, s->outmute[0] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[4]), s->outmute[1] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[5])); /* Headphone: LOUT1VOL ROUT1VOL */ AUD_set_volume_out(s->dac_voice[1], s->mute, s->outmute[0] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[2]), s->outmute[1] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[3])); /* MONOOUT: MONOVOL MONOVOL */ AUD_set_volume_out(s->dac_voice[2], s->mute, s->outmute[0] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[6]), s->outmute[1] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[6]));}static void wm8750_set_format(struct wm8750_s *s){ int i; audsettings_t in_fmt; audsettings_t out_fmt; audsettings_t monoout_fmt; wm8750_out_flush(s); if (s->in[0] && *s->in[0]) AUD_set_active_in(*s->in[0], 0); if (s->out[0] && *s->out[0]) AUD_set_active_out(*s->out[0], 0); for (i = 0; i < IN_PORT_N; i ++) if (s->adc_voice[i]) { AUD_close_in(&s->card, s->adc_voice[i]); s->adc_voice[i] = 0; } for (i = 0; i < OUT_PORT_N; i ++) if (s->dac_voice[i]) { AUD_close_out(&s->card, s->dac_voice[i]); s->dac_voice[i] = 0; } if (!s->enable) return; /* Setup input */ in_fmt.endianness = 0; in_fmt.nchannels = 2; in_fmt.freq = s->adc_hz; in_fmt.fmt = AUD_FMT_S16; s->adc_voice[0] = AUD_open_in(&s->card, s->adc_voice[0], CODEC ".input1", s, wm8750_audio_in_cb, &in_fmt); s->adc_voice[1] = AUD_open_in(&s->card, s->adc_voice[1], CODEC ".input2", s, wm8750_audio_in_cb, &in_fmt); s->adc_voice[2] = AUD_open_in(&s->card, s->adc_voice[2], CODEC ".input3", s, wm8750_audio_in_cb, &in_fmt); /* Setup output */ out_fmt.endianness = 0; out_fmt.nchannels = 2; out_fmt.freq = s->dac_hz; out_fmt.fmt = AUD_FMT_S16; monoout_fmt.endianness = 0; monoout_fmt.nchannels = 1; monoout_fmt.freq = s->rate->dac_hz; monoout_fmt.fmt = AUD_FMT_S16; s->dac_voice[0] = AUD_open_out(&s->card, s->dac_voice[0], CODEC ".speaker", s, wm8750_audio_out_cb, &out_fmt); s->dac_voice[1] = AUD_open_out(&s->card, s->dac_voice[1], CODEC ".headphone", s, wm8750_audio_out_cb, &out_fmt); /* MONOMIX is also in stereo for simplicity */ s->dac_voice[2] = AUD_open_out(&s->card, s->dac_voice[2], CODEC ".monomix", s, wm8750_audio_out_cb, &out_fmt); /* no sense emulating OUT3 which is a mix of other outputs */ wm8750_vol_update(s); /* We should connect the left and right channels to their * respective inputs/outputs but we have completely no need * for mixing or combining paths to different ports, so we * connect both channels to where the left channel is routed. */ if (s->in[0] && *s->in[0]) AUD_set_active_in(*s->in[0], 1); if (s->out[0] && *s->out[0]) AUD_set_active_out(*s->out[0], 1);}static void wm8750_clk_update(struct wm8750_s *s, int ext){ if (s->master || !s->ext_dac_hz) s->dac_hz = s->rate->dac_hz; else s->dac_hz = s->ext_dac_hz; if (s->master || !s->ext_adc_hz) s->adc_hz = s->rate->adc_hz; else s->adc_hz = s->ext_adc_hz; if (s->master || (!s->ext_dac_hz && !s->ext_adc_hz)) { if (!ext) wm8750_set_format(s); } else { if (ext) wm8750_set_format(s); }}void wm8750_reset(i2c_slave *i2c){ struct wm8750_s *s = (struct wm8750_s *) i2c; s->rate = &wm_rate_table[0]; s->enable = 0; wm8750_clk_update(s, 1); s->diff[0] = 0; s->diff[1] = 0; s->ds = 0; s->alc = 0; s->in[0] = &s->adc_voice[0]; s->invol[0] = 0x17; s->invol[1] = 0x17; s->invol[2] = 0xc3; s->invol[3] = 0xc3; s->out[0] = &s->dac_voice[0]; s->outvol[0] = 0xff; s->outvol[1] = 0xff; s->outvol[2] = 0x79; s->outvol[3] = 0x79; s->outvol[4] = 0x79; s->outvol[5] = 0x79; s->outvol[6] = 0x79; s->inmute[0] = 0; s->inmute[1] = 0; s->outmute[0] = 0; s->outmute[1] = 0; s->mute = 1; s->path[0] = 0; s->path[1] = 0; s->path[2] = 0; s->path[3] = 0; s->mpath[0] = 0; s->mpath[1] = 0; s->format = 0x0a; s->idx_in = sizeof(s->data_in); s->req_in = 0; s->idx_out = 0; s->req_out = 0; wm8750_vol_update(s); s->i2c_len = 0;}static void wm8750_event(i2c_slave *i2c, enum i2c_event event){ struct wm8750_s *s = (struct wm8750_s *) i2c; switch (event) { case I2C_START_SEND: s->i2c_len = 0; break; case I2C_FINISH:#ifdef VERBOSE if (s->i2c_len < 2) printf("%s: message too short (%i bytes)\n", __FUNCTION__, s->i2c_len);#endif break; default: break; }}#define WM8750_LINVOL 0x00#define WM8750_RINVOL 0x01#define WM8750_LOUT1V 0x02#define WM8750_ROUT1V 0x03#define WM8750_ADCDAC 0x05#define WM8750_IFACE 0x07#define WM8750_SRATE 0x08#define WM8750_LDAC 0x0a#define WM8750_RDAC 0x0b#define WM8750_BASS 0x0c#define WM8750_TREBLE 0x0d#define WM8750_RESET 0x0f#define WM8750_3D 0x10#define WM8750_ALC1 0x11#define WM8750_ALC2 0x12#define WM8750_ALC3 0x13#define WM8750_NGATE 0x14#define WM8750_LADC 0x15#define WM8750_RADC 0x16#define WM8750_ADCTL1 0x17#define WM8750_ADCTL2 0x18#define WM8750_PWR1 0x19#define WM8750_PWR2 0x1a#define WM8750_ADCTL3 0x1b#define WM8750_ADCIN 0x1f#define WM8750_LADCIN 0x20#define WM8750_RADCIN 0x21#define WM8750_LOUTM1 0x22#define WM8750_LOUTM2 0x23#define WM8750_ROUTM1 0x24#define WM8750_ROUTM2 0x25#define WM8750_MOUTM1 0x26#define WM8750_MOUTM2 0x27#define WM8750_LOUT2V 0x28#define WM8750_ROUT2V 0x29#define WM8750_MOUTV 0x2astatic int wm8750_tx(i2c_slave *i2c, uint8_t data){ struct wm8750_s *s = (struct wm8750_s *) i2c; uint8_t cmd; uint16_t value;
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?