version.h

em86xx 完整启动程序,支持网络下载与串通下载

/*
 * Boot Loader Version
 *
 * This file is automatically generated from Makefile
 */

#ifndef __BOOTLOADER_VERSION_H
#define __BOOTLOADER_VERSION_H

#define BOOTLOADER_MAJORVERSION		0
#define BOOTLOADER_MINORVERSION		12
#define BOOTLOADER_PATCHLEVEL		17

#define MAKE_VERSION(a, b, c)		(((a) << 16) | ((b) << 8) | (c))
#define BOOTLOADER_VERSION			MAKE_VERSION(0, 12, 17)
#define BOOTLOADER_VERSIONSTR		"0.12.17"

#define CONFIG_DEVEL

#define CONFIG_ENABLE_SFLASH
#define CONFIG_ENABLE_SFLASH_SST
#define CONFIG_ENABLE_FLASH
#define MAX_ROMFS_SIZE	7296
#define CONFIG_ENABLE_2NDBOOT
#define STAGE2_IMAGE_SIZE	131072
#define CONFIG_ENABLE_FIP
#define CONFIG_EM86XX_FIP_REF1
#define CONFIG_ENABLE_PCI
#define CONFIG_ENABLE_PCIHOST_EM86XX
#define CONFIG_ENABLE_NETWORK
#define CONFIG_ENABLE_NETWORK_DNS
#define CONFIG_ENABLE_NETWORK_RTL81XX
#define CONFIG_ENABLE_IRQHANDLER
#define CONFIG_SD_PRESERVE_FIQ
#define CONFIG_ENABLE_VSYNCPARAM

#define CONFIG_ARCH_TANGO10
#define CONFIG_ARCH                  "TANGO10"
#define CONFIG_ARCH_TANGO
#define CONFIG_ARCH_TANGO10_REV        3
#define CONFIG_BOARD                 "generic2"
#define DRAMBASE                     0x90000000
#define LOADER_DRAMBASE              0x90060000
#define STAGE1_IMAGE_SIZE            0x20000
#define DEFAULT_UART_PORT            0
#define DEFAULT_UART_BAUDRATE        57600
#define CONFIG_DRAM_ADJUSTMENT

#define DEFAULT_CLKGEN_PLL           0x0101002a
#define DEFAULT_DRAM0_DUNIT_CFG      0xf63001f8
#define DEFAULT_DRAM1_DUNIT_CFG      0
#define DEFAULT_DRAM0_SIZE           5
#define DEFAULT_DRAM1_SIZE           0
#define DEFAULT_DRAM_DUNIT_DELAY0_CTRL 0x00084454 
#define DEFAULT_PCI_SUBSYSTEM_ID     0x00000000
#define DEFAULT_PCI_REVISION_ID      0
#define DEFAULT_PCI_MEMORY_SIZE      0
#define DEFAULT_CONFIGVALID          CONFIGVALID_PCISUBID
#define DEFAULT_SFLA_DRIVER_SPEED    0x0f000003
#define DEFAULT_PB_DEFAULT_TIMING    0x10101010
#define DEFAULT_PB_CS_CONFIG         0x00001044
#define DEFAULT_PB_TIMING0           0x10101010
#define DEFAULT_PB_USE_TIMING0       0x000001f4
#define DEFAULT_PB_TIMING1           0x00110101
#define DEFAULT_PB_USE_TIMING1       0x000003f3
#define DEFAULT_PB_TIMING2           0x00000000
#define DEFAULT_PB_USE_TIMING2       0x00000000
#define DEFAULT_PB_TIMING3           0x00000000
#define DEFAULT_PB_USE_TIMING3       0x00000000
#define DEFAULT_PB_TIMING4           0x00000000
#define DEFAULT_PB_USE_TIMING4       0x00000000
#define DEFAULT_PB_TIMING5           0x00000000
#define DEFAULT_PB_USE_TIMING5       0x00000000
#define DEFAULT_IRQ_GPIOMAP          0x0a090806
#define DEFAULT_BOOTFLAG             BOOTFLAG_NONE
#define DEFAULT_GPIO_DIR             0x0
#define DEFAULT_GPIO_OUTPUT          0x0
#endif