base.m

用于电力系统的一个很好的分析软件

function p = base(p)

global Bus Settings

if ~p.n, return, end

% look for transformers (kt ~= 0)
idx = find(p.con(:,7));
kt = p.con(idx,7);
VL1 = p.con(:,4);

% set zero length for transformers
p.con(idx,6) = zeros(length(idx),1);
V1 = getkv(Bus,p.fr,1);
V2 = getkv(Bus,p.to,1);
KT = V1(idx)./V2(idx);

% check consistency of voltage bases
if ~isempty(kt)
  corr = abs(kt-KT)./KT;
  idx1 = find(corr > 0.1);
  for i = 1:length(idx1)
    k1 = Bus.names{p.fr(idx(idx1(i)))};
    k2 = Bus.names{p.to(idx(idx1(i)))};
    fm_disp(['Tap ratio of transformer #',num2str(idx(idx1(i))), ...
             ' from bus <', k1, '> to bus <', k2, ...
             '> differs more than 10% from the bases defined at', ...
             ' connected buses.'])
  end
  % adjust tap ratio if voltage bases do not match
  idx_m = find(p.con(idx,11) == 0);
  p.con(idx(idx_m),11) = 1;
  p.con(idx,11) = p.con(idx,11).*kt./KT;
end
idx2 = find(abs(VL1-V1)./V1 > 0.1);
for i = 1:length(idx2)
  k1 = Bus.names{p.fr(idx2(i))};
  k2 = Bus.names{p.to(idx2(i))};
  fm_disp(['Voltage of Line #',num2str(idx2(i)), ...
           ' from bus <', k1,'> to bus <', k2, ...
           '> differs more than 10% from the base defined at', ...
           ' the connected bus <', k1,'>'])
end

% Voltage rates
Vb2new = V1.*V1;
Vb2old = VL1.*VL1;

% report line parameters to system base [Sb]
p.con(:,8)  = Vb2old.*p.con(:,8)./p.con(:,3)./Vb2new*Settings.mva;
p.con(:,9)  = Vb2old.*p.con(:,9)./p.con(:,3)./Vb2new*Settings.mva;
p.con(:,10) = Vb2new.*p.con(:,10).*p.con(:,3)./Vb2old/Settings.mva;

% report line limits to system bases
p.con(:,13) = p.con(:,13).*p.con(:,3).*V1./VL1/Settings.mva;
p.con(:,14) = p.con(:,14).*p.con(:,3)/Settings.mva;
p.con(:,15) = p.con(:,15).*p.con(:,3)/Settings.mva;

p.store = p.con;