fm_axesdlg.m

用于电力系统的一个很好的分析软件

                    'Tag', [col 'DirNormal'],...
                    'ToolTip',[col 'Dir=''normal''']);
                set(rnormal,'UserData',rnormal2,'Tag','');
            end

            Y = Y-RowH*2/3;
            rreverse = uicontrol(radioProps,...
                'Position', [X+ColW/2 Y ColW/2 uiH],...
                'String', 'Reverse',...
                'Value', ~radioProps.Value,...
                'Tag', [col 'DirReverse'],...
                'ToolTip',[col 'Dir=''reverse''']);

            if MultDirs
                rreverse2 = uicontrol(radioProps,...
                    'ButtonDownFcn','fm_axesdlg radio me', ...
                    'Enable','off', ...
                    'Position', [X+ColW/2 Y 3 uiH],...
                    'String', '',...
                    'Tag', [col 'DirReverse'],...
                    'ToolTip',[col 'Dir=''reverse''']);
                set(rreverse,'UserData',rreverse2,'Tag','');
                set(rreverse2,'UserData',...
                    struct('Value',0,'Sibling',rreverse,'OtherRadio',rnormal2));
                set(rnormal2,'UserData',...
                    struct('Value',0,'Sibling',rnormal,'OtherRadio',rreverse2));
            end


            Y = Y-RowH*1/3;

            iGroup = iGroup+1;
            localData.LimGroup{iGroup} = [rnormal];
            localData.LimCheck(iGroup) = rreverse;
            localData.Enable{iGroup} = [];
            localData.Disable{iGroup} = [];

            iGroup = iGroup+1;
            localData.LimGroup{iGroup} = [rreverse];
            localData.LimCheck(iGroup) = rnormal;
            localData.Enable{iGroup} = [];
            localData.Disable{iGroup} = [];

            if MultDirs
                iGroup = iGroup+1;
                localData.LimGroup{iGroup} = [rnormal2];
                localData.LimCheck(iGroup) = rreverse2;
                localData.Enable{iGroup} = [];
                localData.Disable{iGroup} = [];

                iGroup = iGroup+1;
                localData.LimGroup{iGroup} = [rreverse2];
                localData.LimCheck(iGroup) = rnormal2;
                localData.Enable{iGroup} = [];
                localData.Disable{iGroup} = [];
            end

            % grid

            % Check if all axes grids are on
            AllGrids = strcmpi(get(ax,[col 'Grid']),'on');
            MultGrids = 0;
            if all(~AllGrids)
                checkProps.Value = 0;
            elseif all(AllGrids)
                checkProps.Value = 1;
            else
                MultGrids = 1;
                checkProps.Value = length(find(AllGrids))>=length(find(~AllGrids));
            end

            Y = Y-RowH;
            g = uicontrol(checkProps,...
                'String', 'On',...
                'Tag', [col 'Grid'],...
                'ToolTip', [col 'Grid'],...
                'Position', [X Y ColW/3 uiH],...
                'Callback', 'fm_axesdlg toggle me');

            iGroup = iGroup+1;
            localData.LimGroup{iGroup} = [];
            localData.LimCheck(iGroup) = g;
            localData.Enable{iGroup} = [];
            localData.Disable{iGroup} = [];

            if MultGrids
                g2 = uicontrol(checkProps,...
                    'ButtonDownFcn','fm_axesdlg toggle me', ...
                    'Enable','off', ...
                    'String', '',...
                    'Tag', [col 'Grid'],...
                    'ToolTip', [col 'Grid'],...
                    'UserData',struct('Value',checkProps.Value,'Sibling',g), ...
                    'Position', [X Y 3 uiH],...
                    'Callback', 'fm_axesdlg toggle me');
                set(g,'UserData',g2,'Tag','');
                iGroup = iGroup+1;
                localData.LimGroup{iGroup} = [];
                localData.LimCheck(iGroup) = g2;
                localData.Enable{iGroup} = [];
                localData.Disable{iGroup} = [];
            end

            iGroup = iGroup+1;

        end


        buttonX(1) = (figPos(3)-4*buttonW-3*buttonPad)/2;
        for ib = 2:4
            buttonX(ib) = buttonX(ib-1) + buttonW + buttonPad;
        end

        buttonProps = struct(...
            'Parent',f,...
            'Units','character',...
            'BackgroundColor', bgcolor,...
            'ForegroundColor', fgcolor,...
            'Position', [0 BotMarginH buttonW buttonH],...
            'Style', 'pushbutton');

        buttonProps.Position(1) = buttonX(1);
        u = uicontrol(buttonProps,...
            'Interruptible', 'off',...
            'String', 'OK',...
            'Callback', 'fm_axesdlg button ok');

        buttonProps.Position(1) = buttonX(2);
        uicontrol(buttonProps,...
            'Interruptible', 'off',...
            'String', 'Cancel',...
            'Callback', 'fm_axesdlg button cancel');

        buttonProps.Position(1) = buttonX(3);
        uicontrol(buttonProps,...
            'Interruptible', 'off',...
            'String', 'Help',...
            'Callback', 'fm_axesdlg showhelp me');

        buttonProps.Position(1) = buttonX(4);
        uicontrol(buttonProps,...
            'Interruptible', 'on',...
            'String', 'Apply',...
            'Callback', 'fm_axesdlg button apply');



        % finish opening axes dialog box
        set(fig,'Pointer',oldPointer);
        set(f,'Visible','on','Pointer','arrow');
        localData.axes = ax;


    catch
        set(fig,'Pointer',oldPointer);
        if exist('f')
            delete(f);
        end
        errordlg({'Couldn''t open axes properties dialog:' ...
                lasterr},...
            'Error',...
            'modal');
    end


    function [val,setflag] = getval(f,tag)
    uic = findobj(f,'Tag',tag);
    setflag = 1; % Flag for setting properties on multiple axes
    switch get(uic,'Style')
    case 'edit'
        val = get(uic, 'String');
        if isempty(val)
            setflag = 0;
        end
    case {'checkbox' 'radiobutton'}
        val = get(uic, 'Value');
        setflag = ~strcmp(get(uic,'Enable'),'off');
        if setflag & isstruct(get(uic,'UserData'));
            %---Making a previously non-common property, common
            LdeleteControl(uic)
        end
    end

    function val = setval(f,tag,val)
    uic = findobj(f,'Tag',tag);
    switch get(uic,'Style')
    case 'edit'
        set(uic, 'String',val);
    case {'checkbox' 'radiobutton'}
        set(uic, 'Value',val);
    end

    function localData = LApplySettings(f, localData)
    % get the values and set props:

    ax = localData.axes;

    iProp = 0;
    try
        % title
        val = getval(f,'Title');

        switch class(val)
        case 'char'
            if ~isempty(val) & size(val,1)>1
                % title returns as a string matrix
                % check for blank line at end of multiline title
                nTitleLines = size(val,1);
                if val(nTitleLines,:)==32  % true if all spaces
                    val(nTitleLines,:) = [];
                    setval(f,'Title',val);
                end
            end
        case 'cell'
            if length(val)>1
                nTitleLines = length(val);
                if isempty(val{nTitleLines}) | val{nTitleLines}==32
                    val(nTitleLines) = [];
                end
            end
        end

        CommonTitle = get(findobj(f,'Tag','Title'),'UserData');
        if ~(isempty(val) & length(ax)>1) | CommonTitle | length(ax)==1,
            t = get(ax,{'Title'});
            set([t{:}],'String',val);
            if ~CommonTitle, % They are common, now
                set(findobj(f,'Tag','Title'),'UserData',1)
            end
        end

        data = getappdata(f,'ScribeAxesDialogData');
        cols = 'XYZ';

        for i = 1:data.nCols
            col = cols(i);
            %label
            CommonLabel = get(findobj(f,'Tag',[col 'Label']),'UserData');
            val = getval(f,[col 'Label']);
            if ~(isempty(val) & length(ax)>1) | CommonLabel | length(ax)==1,
                t = get(ax,{[col 'Label']});
                set([t{:}],'String',val)
                if ~CommonLabel, % They are common, now
                    set(findobj(f,'Tag',[col 'Label']),'UserData',1)
                end
            end


            % scale
            [mode,setflag] = getval(f,[col 'ScaleLinear']);
            if setflag,
                iProp = iProp+1;
                axProps{iProp} = [col 'Scale'];
                modeswitch = {'log' 'linear'};
                axVals{iProp} = modeswitch{mode+1};
                % update immediately so that we get updated limits and ticks
                set(ax,axProps(iProp),axVals(iProp));
            end % if setflag

            linearScale = mode;

            %limitmode
            [manual,setflag] = getval(f,[col 'LimMode']);
            valMax=[]; valMin=[];
            limits=[];
            if setflag
                iProp = iProp+1;
                axProps{iProp} = [col 'LimMode'];
                modeswitch = {'auto' 'manual'};
                axVals{iProp} = modeswitch{manual+1};
                if manual
                    %limits
                    valMin = str2double(getval(f,[col 'LimMin']));
                    valMax = str2double(getval(f,[col 'LimMax']));
                    % ranges checked on callbacks
                    if ~(isnan(valMax) | isnan(valMin)),
                        iProp = iProp+1;
                        axProps{iProp} = [col 'Lim'];
                        limits = [valMin valMax];
                        axVals{iProp} = limits;
                    end
                else % auto
                    set(ax,[col 'LimMode'],'auto');
                    % Check for common limits
                    lim = get(ax,{[col 'Lim']});
                    lim = cat(1,lim{:});
                    Umin = unique(lim(:,1));
                    Umax = unique(lim(:,2));
                    if length(Umin)>1, uminStr = '';
                    else, uminStr = num2str(Umin);
                    end
                    if length(Umax)>1, umaxStr = '';
                    else, umaxStr = num2str(Umax);
                    end
                    setval(f, [col 'LimMin'], uminStr);
                    setval(f, [col 'LimMax'], umaxStr);
                end % if manual
            end % if setflag

            %tickmode
            TickInd=[];
            [manual,setflag] = getval(f,[col 'TickMode']);
            if setflag,
                iProp = iProp+1;
                axProps{iProp} = [col 'TickMode'];
                modeswitch = {'auto' 'manual'};
                axVals{iProp} = modeswitch{manual+1};

                if linearScale
                    if manual
                        tickstep = str2double(getval(f,[col 'TickStep']));
                        if ~isempty(tickstep), % Make sure something is there
                            if ~isempty(limits),
                                % Only preset ticks when everything is the same
                                iProp = iProp+1;
                                axProps{iProp} = [col 'Tick'];
                                ticks = limits(1):tickstep:limits(2);
                                % ranges checked on callbacks
                                axVals{iProp} = ticks;
                            else
                                TickInd = iProp;
                            end
                        end
                    else % auto
                        set(ax,[col 'TickMode'],'auto');
                        if length(ax)==1
                            ticks = get(ax,[col 'Tick']);
                            setval(f, [col 'TickStep'], ticks(2)-ticks(1));
                        end
                    end % if manual
                else % log scale
                    % manual mode disabled for log scale
                    set(ax,[col 'TickMode'],'auto');
                    setval(f, [col 'TickStep'], '');
                end
            end % if setflag

            % scale direction
            [mode,setflag] = getval(f,[col 'DirNormal']);
            if setflag,
                iProp = iProp+1;
                axProps{iProp} = [col 'Dir'];
                modeswitch = {'reverse' 'normal'};
                axVals{iProp} = modeswitch{mode+1};
            end

            % grid
            [mode,setflag] = getval(f,[col 'Grid']);
            if setflag,
                iProp = iProp+1;
                axProps{iProp} = [col 'Grid'];
                modeswitch = {'off' 'on'};
                axVals{iProp} = modeswitch{mode+1};
            end % if setflag

            if ~isempty(TickInd) | isnan(valMax) | isnan(valMin)
                % Going to have to loop thru to set limits/ticks individually
                for ct = 1:length(ax)
                    limits = get(ax(ct),[col 'Lim']);
                    axPropsCustom{1} = [col 'Lim'];
                    if ~isnan(valMax), limits(2) = valMax; end
                    if ~isnan(valMin), limits(1) = valMin; end
                    axValsCustom{1} = limits;

                    if ~isempty(TickInd);
                        axPropsCustom{2} = [col 'Tick'];
                        ticks = limits(1):tickstep:limits(2);
                        % ranges checked on callbacks
                        axValsCustom{2} = ticks;
                    end % if ~isempty(TickInd)

                    set(ax(ct),axPropsCustom,axValsCustom);
                end % for ct
            end

        end  % for col
        set(ax,axProps,axVals)
    catch
        % error somewhere in there...
    end % try/catch


    function LdeleteControl(OldControl)

    ud = get(OldControl,'UserData');
    set(ud.Sibling,'Value',get(OldControl,'Value'), ...
        'Tag',get(OldControl,'Tag'),'UserData',[])
    if isfield(ud,'OtherRadio'),
        ud2 = get(ud.OtherRadio,'UserData');
        set(ud2.Sibling,'Value',get(ud.OtherRadio,'Value'), ...
            'Tag',get(ud.OtherRadio,'Tag'),'UserData',[])
        delete(ud.OtherRadio)
    end
    delete(OldControl)


    function LNoAxesError
    errordlg(['No axes are selected.  Click on an axis to select it.']);