app.c

tinyos2.0版本驱动

uint16_t len, error_t error);
#line 57
static void T6004ReaderP$Uart0Stream$sendDone(
#line 53
uint8_t * buf, 



uint16_t len, error_t error);
# 55 "/opt/tinyos-2.x/tos/interfaces/Read.nc"
static error_t T6004ReaderP$T6004Reader$read(void );
# 64 "/opt/tinyos-2.x/tos/interfaces/TaskBasic.nc"
static void T6004ReaderP$ParsePacket$runTask(void );
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t /*Atm128Uart0C.UartP*/Atm128UartP$1$Init$init(void );
# 48 "/opt/tinyos-2.x/tos/interfaces/UartStream.nc"
static error_t /*Atm128Uart0C.UartP*/Atm128UartP$1$UartStream$send(
#line 44
uint8_t * buf, 



uint16_t len);
# 71 "/opt/tinyos-2.x/tos/lib/timer/Counter.nc"
static void /*Atm128Uart0C.UartP*/Atm128UartP$1$Counter$overflow(void );
# 49 "/opt/tinyos-2.x/tos/chips/atm128/HplAtm128Uart.nc"
static void /*Atm128Uart0C.UartP*/Atm128UartP$1$HplUart$rxDone(uint8_t data);
#line 47
static void /*Atm128Uart0C.UartP*/Atm128UartP$1$HplUart$txDone(void );
# 74 "/opt/tinyos-2.x/tos/interfaces/StdControl.nc"
static error_t /*Atm128Uart0C.UartP*/Atm128UartP$1$StdControl$start(void );
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t PlatformP$MoteInit$init(void );
#line 51
static error_t PlatformP$MeasureClock$init(void );
# 42 "/opt/tinyos-2.x/tos/platforms/mica/PlatformP.nc"
static inline void PlatformP$power_init(void );






static inline error_t PlatformP$Init$init(void );
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t MotePlatformP$SubInit$init(void );
# 33 "/opt/tinyos-2.x/tos/interfaces/GeneralIO.nc"
static void MotePlatformP$SerialIdPin$makeInput(void );
#line 30
static void MotePlatformP$SerialIdPin$clr(void );
# 26 "/opt/tinyos-2.x/tos/platforms/micaz/MotePlatformP.nc"
static inline error_t MotePlatformP$PlatformInit$init(void );
# 46 "/opt/tinyos-2.x/tos/chips/atm128/pins/HplAtm128GeneralIOPinP.nc"
static __inline void /*HplAtm128GeneralIOC.PortA.Bit0*/HplAtm128GeneralIOPinP$0$IO$set(void );

static inline void /*HplAtm128GeneralIOC.PortA.Bit0*/HplAtm128GeneralIOPinP$0$IO$toggle(void );



static __inline void /*HplAtm128GeneralIOC.PortA.Bit0*/HplAtm128GeneralIOPinP$0$IO$makeOutput(void );
#line 46
static __inline void /*HplAtm128GeneralIOC.PortA.Bit1*/HplAtm128GeneralIOPinP$1$IO$set(void );

static inline void /*HplAtm128GeneralIOC.PortA.Bit1*/HplAtm128GeneralIOPinP$1$IO$toggle(void );



static __inline void /*HplAtm128GeneralIOC.PortA.Bit1*/HplAtm128GeneralIOPinP$1$IO$makeOutput(void );
#line 46
static __inline void /*HplAtm128GeneralIOC.PortA.Bit2*/HplAtm128GeneralIOPinP$2$IO$set(void );

static inline void /*HplAtm128GeneralIOC.PortA.Bit2*/HplAtm128GeneralIOPinP$2$IO$toggle(void );



static __inline void /*HplAtm128GeneralIOC.PortA.Bit2*/HplAtm128GeneralIOPinP$2$IO$makeOutput(void );
#line 47
static __inline void /*HplAtm128GeneralIOC.PortA.Bit4*/HplAtm128GeneralIOPinP$4$IO$clr(void );


static __inline void /*HplAtm128GeneralIOC.PortA.Bit4*/HplAtm128GeneralIOPinP$4$IO$makeInput(void );
# 56 "/opt/tinyos-2.x/tos/platforms/iris/MeasureClockC.nc"
enum MeasureClockC$__nesc_unnamed4323 {


  MeasureClockC$MAGIC = 488 / (16 / PLATFORM_MHZ)
};

uint16_t MeasureClockC$cycles;

static inline error_t MeasureClockC$Init$init(void );
#line 143
static inline uint16_t MeasureClockC$Atm128Calibrate$baudrateRegister(uint32_t baudrate);
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t RealMainP$SoftwareInit$init(void );
# 49 "/opt/tinyos-2.x/tos/interfaces/Boot.nc"
static void RealMainP$Boot$booted(void );
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t RealMainP$PlatformInit$init(void );
# 46 "/opt/tinyos-2.x/tos/interfaces/Scheduler.nc"
static void RealMainP$Scheduler$init(void );
#line 61
static void RealMainP$Scheduler$taskLoop(void );
#line 54
static bool RealMainP$Scheduler$runNextTask(void );
# 52 "/opt/tinyos-2.x/tos/system/RealMainP.nc"
int main(void )   ;
# 64 "/opt/tinyos-2.x/tos/interfaces/TaskBasic.nc"
static void SchedulerBasicP$TaskBasic$runTask(
# 45 "/opt/tinyos-2.x/tos/system/SchedulerBasicP.nc"
uint8_t arg_0x1031d70);
# 59 "/opt/tinyos-2.x/tos/interfaces/McuSleep.nc"
static void SchedulerBasicP$McuSleep$sleep(void );
# 50 "/opt/tinyos-2.x/tos/system/SchedulerBasicP.nc"
enum SchedulerBasicP$__nesc_unnamed4324 {

  SchedulerBasicP$NUM_TASKS = 9U, 
  SchedulerBasicP$NO_TASK = 255
};

volatile uint8_t SchedulerBasicP$m_head;
volatile uint8_t SchedulerBasicP$m_tail;
volatile uint8_t SchedulerBasicP$m_next[SchedulerBasicP$NUM_TASKS];








static __inline uint8_t SchedulerBasicP$popTask(void );
#line 86
static inline bool SchedulerBasicP$isWaiting(uint8_t id);




static inline bool SchedulerBasicP$pushTask(uint8_t id);
#line 113
static inline void SchedulerBasicP$Scheduler$init(void );









static bool SchedulerBasicP$Scheduler$runNextTask(void );
#line 138
static inline void SchedulerBasicP$Scheduler$taskLoop(void );
#line 159
static error_t SchedulerBasicP$TaskBasic$postTask(uint8_t id);




static void SchedulerBasicP$TaskBasic$default$runTask(uint8_t id);
# 54 "/opt/tinyos-2.x/tos/interfaces/McuPowerOverride.nc"
static mcu_power_t McuSleepC$McuPowerOverride$lowestState(void );
# 80 "/opt/tinyos-2.x/tos/chips/atm1281/McuSleepC.nc"
const_uint8_t McuSleepC$atm128PowerBits[ATM128_POWER_DOWN + 1] = { 
0, 
1 << 1, ((
1 << 3) | (1 << 2)) | (1 << 1), (
1 << 2) | (1 << 1), (
1 << 3) | (1 << 2), 
1 << 2 };

static inline mcu_power_t McuSleepC$getPowerState(void );
#line 128
static inline void McuSleepC$McuSleep$sleep(void );
#line 141
static inline void McuSleepC$McuPowerState$update(void );
# 31 "/opt/tinyos-2.x/tos/interfaces/GeneralIO.nc"
static void LedsP$Led0$toggle(void );



static void LedsP$Led0$makeOutput(void );
#line 29
static void LedsP$Led0$set(void );

static void LedsP$Led1$toggle(void );



static void LedsP$Led1$makeOutput(void );
#line 29
static void LedsP$Led1$set(void );

static void LedsP$Led2$toggle(void );



static void LedsP$Led2$makeOutput(void );
#line 29
static void LedsP$Led2$set(void );
# 45 "/opt/tinyos-2.x/tos/system/LedsP.nc"
static inline error_t LedsP$Init$init(void );
#line 73
static inline void LedsP$Leds$led0Toggle(void );
#line 88
static inline void LedsP$Leds$led1Toggle(void );
#line 103
static inline void LedsP$Leds$led2Toggle(void );
# 69 "/opt/tinyos-2.x/tos/interfaces/AMSend.nc"
static error_t T6004C$AMSend$send(am_addr_t addr, 
#line 60
message_t * msg, 








uint8_t len);
# 115 "/opt/tinyos-2.x/tos/interfaces/Packet.nc"
static 
#line 112
void * 


T6004C$Packet$getPayload(
#line 110
message_t * msg, 




uint8_t len);
#line 95
static uint8_t T6004C$Packet$maxPayloadLength(void );
# 83 "/opt/tinyos-2.x/tos/interfaces/SplitControl.nc"
static error_t T6004C$SerialControl$start(void );
# 55 "/opt/tinyos-2.x/tos/interfaces/Read.nc"
static error_t T6004C$CO2Reader$read(void );
# 56 "/opt/tinyos-2.x/tos/interfaces/Leds.nc"
static void T6004C$Leds$led0Toggle(void );
#line 72
static void T6004C$Leds$led1Toggle(void );
#line 89
static void T6004C$Leds$led2Toggle(void );
# 53 "/opt/tinyos-2.x/tos/lib/timer/Timer.nc"
static void T6004C$Timer$startPeriodic(uint32_t dt);
# 26 "T6004C.nc"
message_t T6004C$packet;

static inline void T6004C$Boot$booted(void );




static inline void T6004C$SerialControl$startDone(error_t error);







static inline void T6004C$SerialControl$stopDone(error_t error);

static inline void T6004C$Timer$fired(void );





static inline void T6004C$CO2Reader$readDone(error_t result, uint16_t val);
#line 62
static inline void T6004C$AMSend$sendDone(message_t *bufPtr, error_t error);
# 69 "/opt/tinyos-2.x/tos/chips/atm1281/timer/HplAtm128TimerCtrl8.nc"
static uint8_t /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$TimerCtrl$getInterruptFlag(void );
#line 62
static void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$TimerCtrl$setControlB(uint8_t control);
#line 61
static void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$TimerCtrl$setControlA(uint8_t control);
# 67 "/opt/tinyos-2.x/tos/lib/timer/Alarm.nc"
static void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Alarm$fired(void );
# 71 "/opt/tinyos-2.x/tos/lib/timer/Counter.nc"
static void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Counter$overflow(void );
# 57 "/opt/tinyos-2.x/tos/chips/atm1281/timer/HplAtm128TimerAsync.nc"
static void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$TimerAsync$setTimer2Asynchronous(void );
#line 75
static int /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$TimerAsync$compareABusy(void );
# 39 "/opt/tinyos-2.x/tos/chips/atm128/timer/HplAtm128Compare.nc"
static /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Compare$size_type /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Compare$get(void );





static void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Compare$set(/*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Compare$size_type t);










static void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Compare$start(void );
# 52 "/opt/tinyos-2.x/tos/chips/atm128/timer/HplAtm128Timer.nc"
static /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Timer$timer_size /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Timer$get(void );
# 62 "/opt/tinyos-2.x/tos/chips/atm1281/timer/Atm1281AlarmAsyncP.nc"
uint8_t /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$set;
uint32_t /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$t0;
#line 63
uint32_t /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$dt;
uint32_t /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$base;



enum /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$__nesc_unnamed4325 {
  Atm1281AlarmAsyncP$0$MINDT = 2, 
  Atm1281AlarmAsyncP$0$MAXT = 230
};



static void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$setInterrupt(void );


static inline error_t /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Init$init(void );
#line 101
static inline void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$setOcr2A(uint8_t n);
#line 117
static void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$setInterrupt(void );
#line 176
static inline void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Compare$fired(void );
#line 188
static uint32_t /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Counter$get(void );
#line 231
static inline void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Alarm$stop(void );







static void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Alarm$startAt(uint32_t nt0, uint32_t ndt);









static inline uint32_t /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Alarm$getNow(void );



static inline uint32_t /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Alarm$getAlarm(void );



static inline void /*AlarmCounterMilliP.Atm128AlarmAsyncC.Atm1281AlarmAsyncP*/Atm1281AlarmAsyncP$0$Timer$overflow(void );
# 49 "/opt/tinyos-2.x/tos/chips/atm128/timer/HplAtm128Compare.nc"
static void HplAtm1281Timer2AsyncP$Compare$fired(void );
# 61 "/opt/tinyos-2.x/tos/chips/atm128/timer/HplAtm128Timer.nc"
static void HplAtm1281Timer2AsyncP$Timer$overflow(void );
# 79 "/opt/tinyos-2.x/tos/chips/atm1281/timer/HplAtm1281Timer2AsyncP.nc"
static inline uint8_t HplAtm1281Timer2AsyncP$Timer$get(void );
#line 111
static inline void HplAtm1281Timer2AsyncP$TimerCtrl$setControlA(uint8_t x);





static inline void HplAtm1281Timer2AsyncP$TimerCtrl$setControlB(uint8_t x);
#line 134
static inline uint8_t HplAtm1281Timer2AsyncP$TimerCtrl$getInterruptFlag(void );
#line 161
static inline void HplAtm1281Timer2AsyncP$Compare$start(void );









static inline uint8_t HplAtm1281Timer2AsyncP$Compare$get(void );


static inline void HplAtm1281Timer2AsyncP$Compare$set(uint8_t t);









static __inline void HplAtm1281Timer2AsyncP$stabiliseTimer2(void );
#line 199
static inline mcu_power_t HplAtm1281Timer2AsyncP$McuPowerOverride$lowestState(void );
#line 222
void __vector_13(void ) __attribute((signal))   ;







void __vector_15(void ) __attribute((signal))   ;
#line 246
static inline void HplAtm1281Timer2AsyncP$TimerAsync$setTimer2Asynchronous(void );
#line 258
static inline int HplAtm1281Timer2AsyncP$TimerAsync$compareABusy(void );
# 56 "/opt/tinyos-2.x/tos/interfaces/TaskBasic.nc"
static error_t /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$fired$postTask(void );
# 98 "/opt/tinyos-2.x/tos/lib/timer/Alarm.nc"
static /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Alarm$size_type /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Alarm$getNow(void );
#line 92
static void /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Alarm$startAt(/*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Alarm$size_type t0, /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Alarm$size_type dt);
#line 105
static /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Alarm$size_type /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Alarm$getAlarm(void );
#line 62
static void /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Alarm$stop(void );
# 72 "/opt/tinyos-2.x/tos/lib/timer/Timer.nc"
static void /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Timer$fired(void );
# 63 "/opt/tinyos-2.x/tos/lib/timer/AlarmToTimerC.nc"
enum /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$__nesc_unnamed4326 {
#line 63
  AlarmToTimerC$0$fired = 0U
};
#line 63
typedef int /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$__nesc_sillytask_fired[/*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$fired];
#line 44
uint32_t /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$m_dt;
bool /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$m_oneshot;

static inline void /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$start(uint32_t t0, uint32_t dt, bool oneshot);
#line 60
static inline void /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Timer$stop(void );


static inline void /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$fired$runTask(void );






static inline void /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Alarm$fired(void );
#line 82
static inline void /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Timer$startOneShotAt(uint32_t t0, uint32_t dt);


static inline uint32_t /*HilTimerMilliC.AlarmToTimerC*/AlarmToTimerC$0$Timer$getNow(void );
# 56 "/opt/tinyos-2.x/tos/interfaces/TaskBasic.nc"
static error_t /*HilTimerMilliC.VirtualizeTimerC*/VirtualizeTimerC$0$updateFromTimer$postTask(void );
# 125 "/opt/tinyos-2.x/