app.c

tinyos2.0版本驱动

uint8_t len);
#line 89
static void /*SerialDispatcherC.SerialDispatcherP*/SerialDispatcherP$0$Send$default$sendDone(
# 40 "/opt/tinyos-2.x/tos/lib/serial/SerialDispatcherP.nc"
uart_id_t arg_0x1614010, 
# 85 "/opt/tinyos-2.x/tos/interfaces/Send.nc"
message_t * msg, 



error_t error);
# 64 "/opt/tinyos-2.x/tos/interfaces/TaskBasic.nc"
static void /*SerialDispatcherC.SerialDispatcherP*/SerialDispatcherP$0$signalSendDone$runTask(void );
# 67 "/opt/tinyos-2.x/tos/interfaces/Receive.nc"
static 
#line 63
message_t * 



/*SerialDispatcherC.SerialDispatcherP*/SerialDispatcherP$0$Receive$default$receive(
# 39 "/opt/tinyos-2.x/tos/lib/serial/SerialDispatcherP.nc"
uart_id_t arg_0x16189b0, 
# 60 "/opt/tinyos-2.x/tos/interfaces/Receive.nc"
message_t * msg, 
void * payload, 





uint8_t len);
# 31 "/opt/tinyos-2.x/tos/lib/serial/SerialPacketInfo.nc"
static uint8_t /*SerialDispatcherC.SerialDispatcherP*/SerialDispatcherP$0$PacketInfo$default$upperLength(
# 43 "/opt/tinyos-2.x/tos/lib/serial/SerialDispatcherP.nc"
uart_id_t arg_0x1614b10, 
# 31 "/opt/tinyos-2.x/tos/lib/serial/SerialPacketInfo.nc"
message_t *msg, uint8_t dataLinkLen);
#line 15
static uint8_t /*SerialDispatcherC.SerialDispatcherP*/SerialDispatcherP$0$PacketInfo$default$offset(
# 43 "/opt/tinyos-2.x/tos/lib/serial/SerialDispatcherP.nc"
uart_id_t arg_0x1614b10);
# 23 "/opt/tinyos-2.x/tos/lib/serial/SerialPacketInfo.nc"
static uint8_t /*SerialDispatcherC.SerialDispatcherP*/SerialDispatcherP$0$PacketInfo$default$dataLinkLength(
# 43 "/opt/tinyos-2.x/tos/lib/serial/SerialDispatcherP.nc"
uart_id_t arg_0x1614b10, 
# 23 "/opt/tinyos-2.x/tos/lib/serial/SerialPacketInfo.nc"
message_t *msg, uint8_t upperLen);
# 70 "/opt/tinyos-2.x/tos/lib/serial/SendBytePacket.nc"
static uint8_t /*SerialDispatcherC.SerialDispatcherP*/SerialDispatcherP$0$SendBytePacket$nextByte(void );









static void /*SerialDispatcherC.SerialDispatcherP*/SerialDispatcherP$0$SendBytePacket$sendCompleted(error_t error);
# 51 "/opt/tinyos-2.x/tos/lib/serial/ReceiveBytePacket.nc"
static error_t /*SerialDispatcherC.SerialDispatcherP*/SerialDispatcherP$0$ReceiveBytePacket$startPacket(void );






static void /*SerialDispatcherC.SerialDispatcherP*/SerialDispatcherP$0$ReceiveBytePacket$byteReceived(uint8_t data);










static void /*SerialDispatcherC.SerialDispatcherP*/SerialDispatcherP$0$ReceiveBytePacket$endPacket(error_t result);
# 79 "/opt/tinyos-2.x/tos/interfaces/UartStream.nc"
static void HdlcTranslateC$UartStream$receivedByte(uint8_t byte);
#line 99
static void HdlcTranslateC$UartStream$receiveDone(
#line 95
uint8_t * buf, 



uint16_t len, error_t error);
#line 57
static void HdlcTranslateC$UartStream$sendDone(
#line 53
uint8_t * buf, 



uint16_t len, error_t error);
# 45 "/opt/tinyos-2.x/tos/lib/serial/SerialFrameComm.nc"
static error_t HdlcTranslateC$SerialFrameComm$putDelimiter(void );
#line 68
static void HdlcTranslateC$SerialFrameComm$resetReceive(void );
#line 54
static error_t HdlcTranslateC$SerialFrameComm$putData(uint8_t data);
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t /*Atm128Uart1C.UartP*/Atm128UartP$0$Init$init(void );
# 48 "/opt/tinyos-2.x/tos/interfaces/UartStream.nc"
static error_t /*Atm128Uart1C.UartP*/Atm128UartP$0$UartStream$send(
#line 44
uint8_t * buf, 



uint16_t len);
# 71 "/opt/tinyos-2.x/tos/lib/timer/Counter.nc"
static void /*Atm128Uart1C.UartP*/Atm128UartP$0$Counter$overflow(void );
# 49 "/opt/tinyos-2.x/tos/chips/atm128/HplAtm128Uart.nc"
static void /*Atm128Uart1C.UartP*/Atm128UartP$0$HplUart$rxDone(uint8_t data);
#line 47
static void /*Atm128Uart1C.UartP*/Atm128UartP$0$HplUart$txDone(void );
# 74 "/opt/tinyos-2.x/tos/interfaces/StdControl.nc"
static error_t /*Atm128Uart1C.UartP*/Atm128UartP$0$StdControl$start(void );









static error_t /*Atm128Uart1C.UartP*/Atm128UartP$0$StdControl$stop(void );
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t HplAtm128UartP$Uart0Init$init(void );
# 49 "/opt/tinyos-2.x/tos/chips/atm128/HplAtm128Uart.nc"
static void HplAtm128UartP$HplUart0$default$rxDone(uint8_t data);
#line 47
static void HplAtm128UartP$HplUart0$default$txDone(void );
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t HplAtm128UartP$Uart1Init$init(void );
# 42 "/opt/tinyos-2.x/tos/chips/atm128/HplAtm128Uart.nc"
static error_t HplAtm128UartP$HplUart1$enableRxIntr(void );
#line 40
static error_t HplAtm128UartP$HplUart1$enableTxIntr(void );
static error_t HplAtm128UartP$HplUart1$disableTxIntr(void );

static error_t HplAtm128UartP$HplUart1$disableRxIntr(void );


static void HplAtm128UartP$HplUart1$tx(uint8_t data);
# 74 "/opt/tinyos-2.x/tos/interfaces/StdControl.nc"
static error_t HplAtm128UartP$Uart1TxControl$start(void );









static error_t HplAtm128UartP$Uart1TxControl$stop(void );
#line 74
static error_t HplAtm128UartP$Uart1RxControl$start(void );









static error_t HplAtm128UartP$Uart1RxControl$stop(void );
# 63 "/opt/tinyos-2.x/tos/chips/atm1281/timer/HplAtm128TimerCtrl16.nc"
static void HplAtm1281Timer3P$TimerCtrl$setControlB(uint8_t control);
#line 60
static uint8_t HplAtm1281Timer3P$TimerCtrl$getControlB(void );
# 49 "/opt/tinyos-2.x/tos/chips/atm128/timer/HplAtm128Compare.nc"
static void HplAtm1281Timer3P$CompareA$default$fired(void );
# 51 "/opt/tinyos-2.x/tos/chips/atm128/timer/HplAtm128Capture.nc"
static void HplAtm1281Timer3P$Capture$default$captured(HplAtm1281Timer3P$Capture$size_type t);
# 49 "/opt/tinyos-2.x/tos/chips/atm128/timer/HplAtm128Compare.nc"
static void HplAtm1281Timer3P$CompareB$default$fired(void );
#line 49
static void HplAtm1281Timer3P$CompareC$default$fired(void );
# 52 "/opt/tinyos-2.x/tos/chips/atm128/timer/HplAtm128Timer.nc"
static HplAtm1281Timer3P$Timer$timer_size HplAtm1281Timer3P$Timer$get(void );
#line 95
static void HplAtm1281Timer3P$Timer$setScale(uint8_t scale);
#line 58
static void HplAtm1281Timer3P$Timer$set(HplAtm1281Timer3P$Timer$timer_size t);










static void HplAtm1281Timer3P$Timer$start(void );
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t /*InitThreeP.InitThree*/Atm128TimerInitC$0$Init$init(void );
# 61 "/opt/tinyos-2.x/tos/chips/atm128/timer/HplAtm128Timer.nc"
static void /*InitThreeP.InitThree*/Atm128TimerInitC$0$Timer$overflow(void );
#line 61
static void /*CounterThree16C.NCounter*/Atm128CounterC$0$Timer$overflow(void );
# 71 "/opt/tinyos-2.x/tos/lib/timer/Counter.nc"
static void /*CounterMicro32C.Transform32*/TransformCounterC$0$CounterFrom$overflow(void );
# 31 "/opt/tinyos-2.x/tos/lib/serial/SerialPacketInfo.nc"
static uint8_t SerialPacketInfoActiveMessageP$Info$upperLength(message_t *msg, uint8_t dataLinkLen);
#line 15
static uint8_t SerialPacketInfoActiveMessageP$Info$offset(void );







static uint8_t SerialPacketInfoActiveMessageP$Info$dataLinkLength(message_t *msg, uint8_t upperLen);
# 83 "/opt/tinyos-2.x/tos/interfaces/SplitControl.nc"
static error_t TestISLC$SerialControl$start(void );
# 115 "/opt/tinyos-2.x/tos/interfaces/Packet.nc"
static 
#line 112
void * 


TestISLC$Packet$getPayload(
#line 110
message_t * msg, 




uint8_t len);
#line 95
static uint8_t TestISLC$Packet$maxPayloadLength(void );
# 69 "/opt/tinyos-2.x/tos/interfaces/AMSend.nc"
static error_t TestISLC$AMSend$send(am_addr_t addr, 
#line 60
message_t * msg, 








uint8_t len);
# 35 "/opt/tinyos-2.x/tos/interfaces/GeneralIO.nc"
static void TestISLC$PD_Enable$makeOutput(void );
#line 30
static void TestISLC$PD_Enable$clr(void );
# 56 "/opt/tinyos-2.x/tos/interfaces/TaskBasic.nc"
static error_t TestISLC$I2CRead$postTask(void );
#line 56
static error_t TestISLC$StartTimerOneShot$postTask(void );
# 56 "/opt/tinyos-2.x/tos/interfaces/Leds.nc"
static void TestISLC$Leds$led0Toggle(void );
#line 72
static void TestISLC$Leds$led1Toggle(void );
#line 89
static void TestISLC$Leds$led2Toggle(void );
# 56 "/opt/tinyos-2.x/tos/interfaces/TaskBasic.nc"
static error_t TestISLC$ReadDone$postTask(void );
# 110 "/opt/tinyos-2.x/tos/interfaces/Resource.nc"
static error_t TestISLC$Resource$release(void );
#line 78
static error_t TestISLC$Resource$request(void );
# 65 "/opt/tinyos-2.x/tos/interfaces/I2CPacket.nc"
static error_t TestISLC$I2CPacket$read(i2c_flags_t flags, uint16_t addr, uint8_t length, 
#line 61
uint8_t * data);
#line 81
static error_t TestISLC$I2CPacket$write(i2c_flags_t flags, uint16_t addr, uint8_t length, 
#line 77
uint8_t * data);
# 62 "/opt/tinyos-2.x/tos/lib/timer/Timer.nc"
static void TestISLC$Timer$startOneShot(uint32_t dt);
# 66 "TestISLC.nc"
enum TestISLC$__nesc_unnamed4329 {
#line 66
  TestISLC$ReadDone = 0U
};
#line 66
typedef int TestISLC$__nesc_sillytask_ReadDone[TestISLC$ReadDone];
#line 99
enum TestISLC$__nesc_unnamed4330 {
#line 99
  TestISLC$I2CRead = 1U
};
#line 99
typedef int TestISLC$__nesc_sillytask_I2CRead[TestISLC$I2CRead];










enum TestISLC$__nesc_unnamed4331 {
#line 110
  TestISLC$StartTimerOneShot = 2U
};
#line 110
typedef int TestISLC$__nesc_sillytask_StartTimerOneShot[TestISLC$StartTimerOneShot];
#line 24
uint8_t TestISLC$test[8];
message_t TestISLC$packet;

static inline void TestISLC$Boot$booted(void );






static inline void TestISLC$SerialControl$startDone(error_t error);








static inline void TestISLC$SerialControl$stopDone(error_t error);

static inline void TestISLC$Timer$fired(void );









static inline void TestISLC$Resource$granted(void );










static inline void TestISLC$ReadDone$runTask(void );
#line 84
static inline void TestISLC$I2CPacket$readDone(error_t error, uint16_t addr, uint8_t length, uint8_t *data);
#line 99
static inline void TestISLC$I2CRead$runTask(void );




static inline void TestISLC$I2CPacket$writeDone(error_t error, uint16_t addr, uint8_t length, uint8_t *data);





static inline void TestISLC$StartTimerOneShot$runTask(void );




static inline void TestISLC$AMSend$sendDone(message_t *bufPtr, error_t error);
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t PlatformP$MoteInit$init(void );
#line 51
static error_t PlatformP$MeasureClock$init(void );
# 42 "/opt/tinyos-2.x/tos/platforms/mica/PlatformP.nc"
static inline void PlatformP$power_init(void );






static inline error_t PlatformP$Init$init(void );
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t MotePlatformP$SubInit$init(void );
# 33 "/opt/tinyos-2.x/tos/interfaces/GeneralIO.nc"
static void MotePlatformP$SerialIdPin$makeInput(void );
#line 30
static void MotePlatformP$SerialIdPin$clr(void );
# 26 "/opt/tinyos-2.x/tos/platforms/micaz/MotePlatformP.nc"
static inline error_t MotePlatformP$PlatformInit$init(void );
# 46 "/opt/tinyos-2.x/tos/chips/atm128/pins/HplAtm128GeneralIOPinP.nc"
static __inline void /*HplAtm128GeneralIOC.PortA.Bit0*/HplAtm128GeneralIOPinP$0$IO$set(void );

static inline void /*HplAtm128GeneralIOC.PortA.Bit0*/HplAtm128GeneralIOPinP$0$IO$toggle(void );



static __inline void /*HplAtm128GeneralIOC.PortA.Bit0*/HplAtm128GeneralIOPinP$0$IO$makeOutput(void );
#line 46
static __inline void /*HplAtm128GeneralIOC.PortA.Bit1*/HplAtm128GeneralIOPinP$1$IO$set(void );

static inline void /*HplAtm128GeneralIOC.PortA.Bit1*/HplAtm128GeneralIOPinP$1$IO$toggle(void );



static __inline void /*HplAtm128GeneralIOC.PortA.Bit1*/HplAtm128GeneralIOPinP$1$IO$makeOutput(void );
#line 46
static __inline void /*HplAtm128GeneralIOC.PortA.Bit2*/HplAtm128GeneralIOPinP$2$IO$set(void );

static inline void /*HplAtm128GeneralIOC.PortA.Bit2*/HplAtm128GeneralIOPinP$2$IO$toggle(void );



static __inline void /*HplAtm128GeneralIOC.PortA.Bit2*/HplAtm128GeneralIOPinP$2$IO$makeOutput(void );
#line 47
static __inline void /*HplAtm128GeneralIOC.PortA.Bit3*/HplAtm128GeneralIOPinP$3$IO$clr(void );




static __inline void /*HplAtm128GeneralIOC.PortA.Bit3*/HplAtm128GeneralIOPinP$3$IO$makeOutput(void );
#line 47
static __inline void /*HplAtm128GeneralIOC.PortA.Bit4*/HplAtm128GeneralIOPinP$4$IO$clr(void );


static __inline void /*HplAtm128GeneralIOC.PortA.Bit4*/HplAtm128GeneralIOPinP$4$IO$makeInput(void );
#line 46
static __inline void /*HplAtm128GeneralIOC.PortD.Bit0*/HplAtm128GeneralIOPinP$24$IO$set(void );
static __inline void /*HplAtm128GeneralIOC.PortD.Bit0*/HplAtm128GeneralIOPinP$24$IO$clr(void );


static __inline void /*HplAtm128GeneralIOC.PortD.Bit0*/HplAtm128GeneralIOPinP$24$IO$makeInput(void );
#line 46
static __inline void /*HplAtm128GeneralIOC.PortD.Bit1*/HplAtm128GeneralIOPinP$25$IO$set(void );
static __inline void /*HplAtm128GeneralIOC.PortD.Bit1*/HplAtm128GeneralIOPinP$25$IO$clr(void );


static __inline void /*HplAtm128GeneralIOC.PortD.Bit1*/HplAtm128GeneralIOPinP$25$IO$makeInput(void );
# 56 "/opt/tinyos-2.x/tos/platforms/iris/MeasureClockC.nc"
enum MeasureClockC$__nesc_unnamed4332 {


  MeasureClockC$MAGIC = 488 / (16 / PLATFORM_MHZ)
};

uint16_t MeasureClockC$cycles;

static inline error_t MeasureClockC$Init$init(void );
#line 143
static inline uint16_t MeasureClockC$Atm128Calibrate$baudrateRegister(uint32_t baudrate);
# 51 "/opt/tinyos-2.x/tos/interfaces/Init.nc"
static error_t RealMainP$SoftwareInit$init(void );
# 49 "/opt/tinyos-2.x/tos/interfaces/Boot.nc"
static void RealMainP$Boot$booted(void );