📄 hplsensirionsht11c.nc
字号:
/*
* Copyright (c) 2005-2006 Arch Rock Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
* - Neither the name of the Arch Rock Corporation nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* ARCHED ROCK OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE
*/
/**
* HplSensirionSht11C is a low-level component, intended to provide
* the physical resources used by the Sensirion SHT11 sensor on the
* telosb platform so that the chip driver can make use of them. You
* really shouldn't be wiring to this, unless you're writing a new
* Sensirion SHT11 driver.
*
* @author Gilman Tolle <gtolle@archrock.com>
* @version $Revision: 1.6 $ $Date: 2007/02/04 19:56:29 $
*/
configuration HplSensirionSht11C {
provides interface Resource[ uint8_t id ];
provides interface GeneralIO as DATA;
provides interface GeneralIO as SCK;
provides interface GpioInterrupt as InterruptDATA;
}
implementation {
/*
components HplMsp430GeneralIOC;
components new Msp430GpioC() as DATAM;
components new Msp430GpioC() as SCKM;
components new Msp430GpioC() as PWRM;
*/
components HplAtm128GeneralIOC;
/*
DATAM -> HplMsp430GeneralIOC.Port15;
SCKM -> HplMsp430GeneralIOC.Port16;
PWRM -> HplMsp430GeneralIOC.Port17;
*/
//DATA = DATAM;
//SCK = SCKM;
//DATA = HplAtm128GeneralIOC.PortD0;
//SCK = HplAtm128GeneralIOC.PortD1;
DATA = HplAtm128GeneralIOC.PortE7;
SCK = HplAtm128GeneralIOC.PortA4;
components HplSensirionSht11P;
//HplSensirionSht11P.PWR -> PWRM;
//HplSensirionSht11P.DATA -> HplAtm128GeneralIOC.PortD0;
//HplSensirionSht11P.SCK -> HplAtm128GeneralIOC.PortD1;
HplSensirionSht11P.DATA -> HplAtm128GeneralIOC.PortE7;
HplSensirionSht11P.SCK -> HplAtm128GeneralIOC.PortA4;
components new TimerMilliC();
HplSensirionSht11P.Timer -> TimerMilliC;
/*
components HplMsp430InterruptC;
components new Msp430InterruptC() as InterruptDATAC;
InterruptDATAC.HplInterrupt -> HplMsp430InterruptC.Port15;
InterruptDATA = InterruptDATAC.Interrupt;
*/
components HplAtm128InterruptC;
components new Atm128GpioInterruptC() as InterruptDATAC;
//InterruptDATAC.Atm128Interrupt -> HplAtm128InterruptC.Int0;
InterruptDATAC.Atm128Interrupt -> HplAtm128InterruptC.Int7;
InterruptDATA = InterruptDATAC.Interrupt;
components new FcfsArbiterC( "Sht11.Resource" ) as Arbiter;
Resource = Arbiter;
components new SplitControlPowerManagerC();
SplitControlPowerManagerC.SplitControl -> HplSensirionSht11P;
SplitControlPowerManagerC.ArbiterInfo -> Arbiter.ArbiterInfo;
SplitControlPowerManagerC.ResourceDefaultOwner -> Arbiter.ResourceDefaultOwner;
}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -