⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 datasendexamplem.nc

📁 tinyos2.0版本驱动
💻 NC
字号:
/* * * @author IPP HURRAY http://www.hurray.isep.ipp.pt/art-wise * @author Andre Cunha * */ #include <Timer.h>#include "printfUART.h"module DataSendExampleM {	uses interface Boot;	uses interface Leds;		uses interface Timer<TMilli> as Timer0;		uses interface Timer<TMilli> as Timer_Send;	//MAC interfaces		uses interface MLME_START;		uses interface MLME_GET;	uses interface MLME_SET;		uses interface MLME_BEACON_NOTIFY;	uses interface MLME_GTS;		uses interface MLME_ASSOCIATE;	uses interface MLME_DISASSOCIATE;		uses interface MLME_ORPHAN;		uses interface MLME_SYNC;	uses interface MLME_SYNC_LOSS;			uses interface MLME_RESET;		uses interface MLME_SCAN;		uses interface MCPS_DATA;  }implementation {	uint8_t beacon_present=0;	uint8_t on_sync=0;		PANDescriptor pan_des;		uint32_t my_short_address=0x00000000;	uint32_t my_pan_id=0x00001234;		uint32_t DestinationMote[2];	  event void Boot.booted() {    		printfUART_init();		printfUART("i_am_pan: %i\n", TYPE_DEVICE);		DestinationMote[0]=0x00000000;	DestinationMote[1]=0x00000002;		if (TYPE_DEVICE == COORDINATOR)	{		my_short_address = 0x0000;		call Timer0.startOneShot(3000);	}	else	{		call Timer0.startOneShot(8000);	}  }   event void Timer0.fired() {    	uint8_t v_temp[2];			if (TYPE_DEVICE == END_DEVICE)	{			my_short_address = TOS_NODE_ID;				//set the MAC short address variable		v_temp[0] = (uint8_t)(my_short_address >> 8);		v_temp[1] = (uint8_t)(my_short_address );				call MLME_SET.request(MACSHORTADDRESS,v_temp);			//set the MAC PANID variable		v_temp[0] = (uint8_t)(MAC_PANID >> 8);		v_temp[1] = (uint8_t)(MAC_PANID );				call MLME_SET.request(MACPANID,v_temp);				call Timer_Send.startPeriodic(3000);	}	else	{		//set the MAC short address variable		v_temp[0] = (uint8_t)(my_short_address >> 8);		v_temp[1] = (uint8_t)(my_short_address );				call MLME_SET.request(MACSHORTADDRESS,v_temp);			//set the MAC PANID variable		v_temp[0] = (uint8_t)(MAC_PANID >> 8);		v_temp[1] = (uint8_t)(MAC_PANID );				call MLME_SET.request(MACPANID,v_temp);			//start sending beacons		call MLME_START.request(MAC_PANID, LOGICAL_CHANNEL, BEACON_ORDER, SUPERFRAME_ORDER,1,0,0,0,0);				//call Timer_send.start(TIMER_REPEAT,8000);	}				  }  event void Timer_Send.fired() {			uint32_t SrcAddr[2];		uint8_t msdu_payload[4];		SrcAddr[0]=0x00000000;	SrcAddr[1]=TOS_NODE_ID;		//DestinationMote[0]=0x00000000;	//DestinationMote[1]=0x0000FFFF;				if(TYPE_DEVICE == COORDINATOR)	{				SrcAddr[0]=0x00000000;			SrcAddr[1]=TOS_NODE_ID;						if (DestinationMote[1]==0x00000002)			{				DestinationMote[1]=0x00000003;			}else{				DestinationMote[1]=0x00000002;			}			//printfUART("send to: %i\n", DestinationMote[1]);			//call Leds.greenToggle();																						//set_txoptions(ack, gts, indirect_transmission, security)			call MCPS_DATA.request(SHORT_ADDRESS, MAC_PANID, SrcAddr, SHORT_ADDRESS, MAC_PANID, DestinationMote, 4, msdu_payload,1,set_txoptions(1,0,0,0));	}	else	{				DestinationMote[0]=0x00000000;			DestinationMote[1]=0x00000000;																								//set_txoptions(ack, gts, indirect_transmission, security)			call MCPS_DATA.request(SHORT_ADDRESS, MAC_PANID, SrcAddr, SHORT_ADDRESS, MAC_PANID, DestinationMote, 4, msdu_payload,1,set_txoptions(1,0,0,0));	}		}/*****************************************************************************************************/  /**************************************MLME-SCAN*******************************************************//*****************************************************************************************************/ event error_t MLME_SCAN.confirm(uint8_t status,uint8_t ScanType, uint32_t UnscannedChannels, uint8_t ResultListSize, uint8_t EnergyDetectList[], SCAN_PANDescriptor PANDescriptorList[]){		return SUCCESS;}/*****************************************************************************************************/  /**************************************MLME-ORPHAN*******************************************************//*****************************************************************************************************/   event error_t MLME_ORPHAN.indication(uint32_t OrphanAddress[1], uint8_t SecurityUse, uint8_t ACLEntry){return SUCCESS;}/*****************************************************************************************************/  /**************************************MLME-RESET*******************************************************//*****************************************************************************************************/ event error_t MLME_RESET.confirm(uint8_t status){return SUCCESS;} /*****************************************************************************************************/  /**************************************MLME-SYNC-LOSS*******************************************************//*****************************************************************************************************/ event error_t MLME_SYNC_LOSS.indication(uint8_t LossReason){return SUCCESS;}      /*****************************************************************************************************/  /**************************************MLME-GTS*******************************************************//*****************************************************************************************************/ event error_t MLME_GTS.confirm(uint8_t GTSCharacteristics, uint8_t status){		return SUCCESS;}event error_t MLME_GTS.indication(uint16_t DevAddress, uint8_t GTSCharacteristics, bool SecurityUse, uint8_t ACLEntry){	return SUCCESS;}  /*****************************************************************************************************/  /**************************************MLME-BEACON NOTIFY*********************************************//*****************************************************************************************************/ event error_t MLME_BEACON_NOTIFY.indication(uint8_t BSN,PANDescriptor pan_descriptor, uint8_t PenAddrSpec, uint8_t AddrList, uint8_t sduLength, uint8_t sdu[]){	return SUCCESS;}/*****************************************************************************************************/  /**************************************MLME-START*****************************************************//*****************************************************************************************************/     event error_t MLME_START.confirm(uint8_t status)	{			return SUCCESS;	}  /*****************************************************************************************************/  /**********************				  MLME-SET		  	    ******************************************//*****************************************************************************************************/         event error_t MLME_SET.confirm(uint8_t status,uint8_t PIBAttribute)	{			return SUCCESS;	}	/*****************************************************************************************************/  /*************************			MLME-GET			    ******************************************//*****************************************************************************************************/ 	    event error_t MLME_GET.confirm(uint8_t status,uint8_t PIBAttribute, uint8_t PIBAttributeValue[])	{			return SUCCESS;	}			/*****************************************************************************************************/  /**************************************MLME-ASSOCIATE*************************************************//*****************************************************************************************************/ event error_t MLME_ASSOCIATE.indication(uint32_t DeviceAddress[], uint8_t CapabilityInformation, bool SecurityUse, uint8_t ACLEntry){	return SUCCESS;}event error_t MLME_ASSOCIATE.confirm(uint16_t AssocShortAddress, uint8_t status){	return SUCCESS;}	/*****************************************************************************************************/  /**************************************MLME-DISASSOCIATE**********************************************//*****************************************************************************************************/ event error_t MLME_DISASSOCIATE.indication(uint32_t DeviceAddress[], uint8_t DisassociateReason, bool SecurityUse, uint8_t ACLEntry){	return SUCCESS;}  event error_t MLME_DISASSOCIATE.confirm(uint8_t status){	return SUCCESS;}  /*****************************************************************************************************/  /*****************************************************************************************************/  /****************					MCPS EVENTS 				 *************************************//*****************************************************************************************************/ /*****************************************************************************************************/  /*****************************************************************************************************/  /*********************					MCPS-DATA 		  	   ***************************************//*****************************************************************************************************/ event error_t MCPS_DATA.confirm(uint8_t msduHandle, uint8_t status){	return SUCCESS;}  event error_t MCPS_DATA.indication(uint16_t SrcAddrMode, uint16_t SrcPANId, uint32_t SrcAddr[2], uint16_t DstAddrMode, uint16_t DestPANId, uint32_t DstAddr[2], uint16_t msduLength,uint8_t msdu[100],uint16_t mpduLinkQuality, uint16_t SecurityUse, uint16_t ACLEntry){	//call Leds.led1Toggle();	return SUCCESS;}  }

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -