📄 par.xmsgs
字号:
<?xml version="1.0" encoding="UTF-8"?>
<!-- IMPORTANT: This is an internal file that has been generated
by the Xilinx ISE software. Any direct editing or
changes made to this file may result in unpredictable
behavior or data corruption. It is strongly advised that
users do not edit the contents of this file. -->
<messages>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
"<arg fmt="%s" index="1">TS_clk4x = PERIOD TIMEGRP "clk4x" 2 ns HIGH 50%;</arg>"
fails the pulse width check for clock <arg fmt="%s" index="2">clk4x_BUFGP</arg> because the low value (<arg fmt="%d" index="3">1000</arg> ps) or high value (<arg fmt="%d" index="4">1000</arg> ps) is less than the minimum internal pulse width limits of <arg fmt="%d" index="5">1116</arg> ps low and <arg fmt="%d" index="6">1116</arg> ps high. Please increase the period of the constraint to remove this timing failure.</msg>
<msg type="warning" file="Timing" num="3238" delta="unknown" >Timing Constraint
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -