prescale_counter.par

来自「该源码为xilinx ise教程的附带光盘源码」· PAR 代码 · 共 146 行

Release 9.1i par J.30
Copyright (c) 1995-2006 Xilinx, Inc.  All rights reserved.

ZHONGXCH::  Tue Dec 12 16:10:02 2006

par -w -intstyle ise -ol std -t 1 prescale_counter_map.ncd prescale_counter.ncd
prescale_counter.pcf 


Constraints file: prescale_counter.pcf.
Loading device for application Rf_Device from file '5vlx30.nph' in environment D:\Xilinx91i;d:\Xilinx91i.
   "prescale_counter" is an NCD, version 3.1, device xc5vlx30, package ff324, speed -3

Initializing temperature to 85.000 Celsius. (default - Range: 0.000 to 85.000 Celsius)
Initializing voltage to 0.950 Volts. (default - Range: 0.950 to 1.050 Volts)


Device speed data version:  "ADVANCED 1.49 2006-10-19".


INFO:Par:253 - The Map -timing placement will be retained since it is likely to achieve better performance.

Device Utilization Summary:

   Number of BUFGs                           1 out of 32      3%
   Number of External IOBs                  34 out of 220    15%
      Number of LOCed IOBs                   0 out of 34      0%

   Number of Slice Registers                32 out of 19200   1%
      Number used as Flip Flops             32
      Number used as Latches                 0
      Number used as LatchThrus              0

   Number of Slice LUTS                     33 out of 19200   1%
   Number of Slice LUT-Flip Flop pairs      34 out of 19200   1%


Overall effort level (-ol):   Standard 
Router effort level (-rl):    Standard 

Starting initial Timing Analysis.  REAL time: 1 mins 26 secs 
Finished initial Timing Analysis.  REAL time: 1 mins 26 secs 

Starting Router

Phase 1: 134 unrouted;       REAL time: 1 mins 27 secs 

Phase 2: 94 unrouted;       REAL time: 1 mins 27 secs 

Phase 3: 0 unrouted;       REAL time: 1 mins 27 secs 

Phase 4: 0 unrouted; (0)      REAL time: 1 mins 27 secs 

Phase 5: 0 unrouted; (0)      REAL time: 1 mins 27 secs 

Phase 6: 0 unrouted; (0)      REAL time: 1 mins 27 secs 

Total REAL time to Router completion: 1 mins 27 secs 
Total CPU time to Router completion: 1 mins 19 secs 

Partition Implementation Status
-------------------------------

  No Partitions were found in this design.

-------------------------------

Generating "PAR" statistics.

**************************
Generating Clock Report
**************************

+---------------------+--------------+------+------+------------+-------------+
|        Clock Net    |   Resource   |Locked|Fanout|Net Skew(ns)|Max Delay(ns)|
+---------------------+--------------+------+------+------------+-------------+
|           clk_BUFGP |BUFGCTRL_X0Y12| No   |   10 |  0.024     |  1.163      |
+---------------------+--------------+------+------+------------+-------------+

* Net Skew is the difference between the minimum and maximum routing
only delays for the net. Note this is different from Clock Skew which
is reported in TRCE timing report. Clock Skew is the difference between
the minimum and maximum path delays which includes logic delays.


   The Delay Summary Report


The NUMBER OF SIGNALS NOT COMPLETELY ROUTED for this design is: 0

   The AVERAGE CONNECTION DELAY for this design is:        0.690
   The MAXIMUM PIN DELAY IS:                               1.335
   The AVERAGE CONNECTION DELAY on the 10 WORST NETS is:   1.247

   Listing Pin Delays by value: (nsec)

    d < 1.00   < d < 2.00  < d < 3.00  < d < 4.00  < d < 5.00  d >= 5.00
   ---------   ---------   ---------   ---------   ---------   ---------
          61          44           0           0           0           0

Timing Score: 0

Asterisk (*) preceding a constraint indicates it was not met.
   This may be due to a setup or hold violation.

------------------------------------------------------------------------------------------------------
  Constraint                                |  Check  | Worst Case |  Best Case | Timing |   Timing   
                                            |         |    Slack   | Achievable | Errors |    Score   
------------------------------------------------------------------------------------------------------
  TS_clk = PERIOD TIMEGRP "clk" 5 ns HIGH 5 | SETUP   |     3.110ns|     1.890ns|       0|           0
  0%                                        | HOLD    |     0.419ns|            |       0|           0
------------------------------------------------------------------------------------------------------
  OFFSET = OUT 10 ns AFTER COMP "clk"       | MAXDELAY|     3.208ns|     6.792ns|       0|           0
------------------------------------------------------------------------------------------------------
  TS_upper_counter = MAXDELAY FROM TIMEGRP  | SETUP   |    18.189ns|     1.811ns|       0|           0
  "upper_counter" TO TIMEGRP         "upper | HOLD    |     0.505ns|            |       0|           0
  _counter" TS_clk * 4                      |         |            |            |        |            
------------------------------------------------------------------------------------------------------


All constraints were met.


Generating Pad Report.

All signals are completely routed.

Total REAL time to PAR completion: 1 mins 29 secs 
Total CPU time to PAR completion: 1 mins 21 secs 

Peak Memory Usage:  279 MB

Placer: Placement generated during map.
Routing: Completed - No errors found.
Timing: Completed - No errors found.

Number of error messages: 0
Number of warning messages: 0
Number of info messages: 1

Writing design to file prescale_counter.ncd



PAR done!