xintc.c

关于xilinx大学计划配需教程实验五源代码

/* $Id: xintc.c,v 1.4 2005/01/04 17:48:57 moleres Exp $ */
/******************************************************************************
*
*       XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
*       AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
*       SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
*       OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
*       APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
*       THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
*       AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
*       FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
*       WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
*       IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
*       REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
*       INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
*       FOR A PARTICULAR PURPOSE.
*
*       (c) Copyright 2002-2004 Xilinx Inc.
*       All rights reserved.
*
******************************************************************************/
/*****************************************************************************/
/**
*
* @file xintc.c
*
* Contains required functions for the XIntc driver for the Xilinx Interrupt
* Controller. See xintc.h for a detailed description of the driver.
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver   Who  Date     Changes
* ----- ---- -------- --------------------------------------------------------
* 1.00a ecm  08/16/01 First release
* 1.00b jhl  02/21/02 Repartitioned the driver for smaller files
* 1.00b jhl  04/24/02 Made LookupConfig global and compressed ack before table
*                     in the configuration into a bit mask
* 1.00c rpm  10/17/03 New release. Support the static vector table created
*                     in the xintc_g.c configuration table.
* 1.00c rpm  04/23/04 Removed check in XIntc_Connect for a previously connected
*                     handler. Always overwrite the vector table handler with
*                     the handler provided as an argument.
* </pre>
*
******************************************************************************/

/***************************** Include Files *********************************/

#include "xbasic_types.h"
#include "xintc.h"
#include "xintc_l.h"
#include "xintc_i.h"

/************************** Constant Definitions *****************************/


/**************************** Type Definitions *******************************/


/***************** Macros (Inline Functions) Definitions *********************/


/************************** Variable Definitions *****************************/

/*
 * array of masks associated with the bit position, improves performance
 * in the ISR and acknowledge functions, this table is shared between all
 * instances of the driver, this table is not statically initialized because
 * the size of the table is based upon the maximum used interrupt id
 */
Xuint32 XIntc_BitPosMask[XPAR_INTC_MAX_NUM_INTR_INPUTS];

/************************** Function Prototypes ******************************/

static void StubHandler(void *CallBackRef);

/*****************************************************************************/
/**
*
* Initialize a specific interrupt controller instance/driver. The
* initialization entails:
*
* - Initialize fields of the XIntc structure
* - Initial vector table with stub function calls
* - All interrupt sources are disabled
* - Interrupt output is disabled
*
* @param    InstancePtr is a pointer to the XIntc instance to be worked on.
* @param    DeviceId is the unique id of the device controlled by this XIntc
*           instance.  Passing in a device id associates the generic XIntc
*           instance to a specific device, as chosen by the caller or
*           application developer.
*
* @return
*
* - XST_SUCCESS if initialization was successful
* - XST_DEVICE_IS_STARTED if the device has already been started
* - XST_DEVICE_NOT_FOUND if device configuration information was not found for
*   a device with the supplied device ID.
*
* @note
*
* None.
*
******************************************************************************/
XStatus XIntc_Initialize(XIntc *InstancePtr, Xuint16 DeviceId)
{
    Xuint8  Id;
    XIntc_Config *CfgPtr;
    Xuint32 NextBitMask = 1;
    
    XASSERT_NONVOID(InstancePtr != XNULL);

    /*
     * If the device is started, disallow the initialize and return a status
     * indicating it is started.  This allows the user to stop the device
     * and reinitialize, but prevents a user from inadvertently initializing
     */
    if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED)
    {
        return XST_DEVICE_IS_STARTED;
    }

    /*
     * Lookup the device configuration in the CROM table. Use this
     * configuration info down below when initializing this component.
     */
    CfgPtr = XIntc_LookupConfig(DeviceId);
    if (CfgPtr == XNULL)
    {
        return XST_DEVICE_NOT_FOUND;
    }

    /*
     * Set some default values
     */
    InstancePtr->IsReady = 0;
    InstancePtr->IsStarted = 0;                 /* not started */
    InstancePtr->CfgPtr = CfgPtr;
    
    InstancePtr->CfgPtr->Options = XIN_SVC_SGL_ISR_OPTION;

    /*
     * save the base address pointer such that the registers of the interrupt
     * can be accessed
     */
    InstancePtr->BaseAddress = CfgPtr->BaseAddress;
  
    /*
     * initialize all the data needed to perform interrupt processing for
     * each interrupt ID up to the maximum used
     */
    for (Id = 0; Id < XPAR_INTC_MAX_NUM_INTR_INPUTS; Id++)
    {
        /* Initalize the handler to point to a stub to handle an interrupt
         * which has not been connected to a handler. Only initialize it
         * if the handler is 0 or XNullHandler, which means it was not
         * initialized statically by the tools/user. Set the callback
         * reference to this instance so that unhandled interrupts can be
         * tracked.
         */
        if ((InstancePtr->CfgPtr->HandlerTable[Id].Handler == 0) ||
            (InstancePtr->CfgPtr->HandlerTable[Id].Handler == XNullHandler))
        {
            InstancePtr->CfgPtr->HandlerTable[Id].Handler = StubHandler;
        }
        InstancePtr->CfgPtr->HandlerTable[Id].CallBackRef = InstancePtr;

        /* initialize the bit position mask table such that bit positions
         * are lookups only for each interrupt id, with 0 being a special
         * case (XIntc_BitPosMask[] = { 1, 2, 4, 8, ... })
         */
        XIntc_BitPosMask[Id] = NextBitMask;
        NextBitMask *= 2;
    }

    /*
     * disable IRQ output signal
     * disable all interrupt sources
     * acknowledge all sources
     */
    XIntc_Out32(InstancePtr->BaseAddress + XIN_MER_OFFSET, 0);
    XIntc_Out32(InstancePtr->BaseAddress + XIN_IER_OFFSET, 0);
    XIntc_Out32(InstancePtr->BaseAddress + XIN_IAR_OFFSET, 0xFFFFFFFF);

    /*
     * indicate the instance is now ready to use, successfully initialized
     */
    InstancePtr->IsReady = XCOMPONENT_IS_READY;

    return XST_SUCCESS;
}

/*****************************************************************************/
/**
*
* Starts the interrupt controller by enabling the output from the controller
* to the processor. Interrupts may be generated by the interrupt controller
* after this function is called.
*
* It is necessary for the caller to connect the interrupt handler of this
* component to the proper interrupt source.
*
* @param    InstancePtr is a pointer to the XIntc instance to be worked on.
* @param    Mode determines if software is allowed to simulate interrupts or
*           real interrupts are allowed to occur. Note that these modes are
*           mutually exclusive. The interrupt controller hardware resets in
*           a mode that allows software to simulate interrupts until this mode
*           is exited. It cannot be reentered once it has been exited. One of
*           the following values should be used for the mode.
*
*           - XIN_SIMULATION_MODE enables simulation of interrupts only
*           - XIN_REAL_MODE enables hardware interrupts only
*
* @return
*
* - XST_SUCCESS if the device was started successfully
* - XST_FAILURE if simulation mode was specified and it could not be set
*   because real mode has already been entered.
*
* @note
*
* Must be called after XIntc initialization is completed.
*
******************************************************************************/
XStatus XIntc_Start(XIntc *InstancePtr, Xuint8 Mode)
{
    Xuint32 MasterEnable = XIN_INT_MASTER_ENABLE_MASK;

    /*
     * assert the arguments
     */
    XASSERT_NONVOID(InstancePtr != XNULL);
    XASSERT_NONVOID((Mode == XIN_SIMULATION_MODE) || (Mode == XIN_REAL_MODE))
    XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);

    /*
     *
     */
    if (Mode == XIN_SIMULATION_MODE)
    {
        if (MasterEnable & XIN_INT_HARDWARE_ENABLE_MASK)
        {
            return XST_FAILURE;
        }
    }
    else
    {
        MasterEnable |= XIN_INT_HARDWARE_ENABLE_MASK;
    }

    /*
     * Indicate the instance is ready to be used and is started before we
     * enable the device.
     */
    InstancePtr->IsStarted = XCOMPONENT_IS_STARTED;

    XIntc_Out32(InstancePtr->BaseAddress + XIN_MER_OFFSET, MasterEnable);

    return XST_SUCCESS;
}

/*****************************************************************************/
/**
*
* Stops the interrupt controller by disabling the output from the controller
* so that no interrupts will be caused by the interrupt controller.
*
* @param    InstancePtr is a pointer to the XIntc instance to be worked on.
*
* @return
*
* None.
*
* @note
*
* None.
*
******************************************************************************/
void XIntc_Stop(XIntc *InstancePtr)
{
    /*
     * assert the arguments
     */

    XASSERT_VOID(InstancePtr != XNULL);
    XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);

    /* stop all interrupts from occurring thru the interrupt controller by
     * disabling all interrupts in the MER register
     */
    XIntc_Out32(InstancePtr->BaseAddress + XIN_MER_OFFSET, 0);

    InstancePtr->IsStarted = 0;
}

/*****************************************************************************/
/**
*
* Makes the connection between the Id of the interrupt source and the
* associated handler that is to run when the interrupt is recognized. The
* argument provided in this call as the Callbackref is used as the argument
* for the handler when it is called.
*