usb1_1.uv2

USB程序设计,在Keil工程下编译通过,程序模块清晰,相信对USB程序设计者会有帮助.

### uVision2 Project, (C) Keil Software
### Do not modify !

Target (usb1_1), 0x0000 // Tools: 'MCS-51'

Group (main files)
Group (head files)

File 1,1,<.\main.c><main.c> 0x0 
File 1,1,<.\int.c><int.c> 0x0 
File 2,5,<.\varmain.h><varmain.h> 0x0 
File 2,5,<.\macro.h><macro.h> 0x0 
File 2,5,<.\varint.h><varint.h> 0x0 
File 2,5,<.\Usb100.h><Usb100.h> 0x0 


Options 1,0,0  // Target 'usb1_1'
 Device (8052AH)
 Vendor (Intel)
 Cpu (IRAM(0 - 0xFF) IROM(0-0x1FFF) CLOCK(12000000))
 FlashUt ()
 StupF ()
 FlashDR ()
 Rgf (REG52.H)
 Mem ()
 C ()
 A ()
 RL ()
 OH ()
 UseEnv=0
 EnvBin ()
 EnvInc ()
 EnvLib ()
 EnvReg ()
 OrgReg ()
 TgStat=0
 OutDir (.\)
 OutName (usb1_1)
 GenApp=1
 GenLib=0
 GenHex=1
 Debug=1
 Browse=1
 LstDir (.\)
 HexSel=0
 MG32K=0
 TGMORE=0
 RunUsr 0 0 <>
 RunUsr 1 0 <>
 BrunUsr 0 0 <>
 BrunUsr 1 0 <>
 SVCSID <>
 MODEL5=0
 RTOS5=0
 ROMSZ5=2
 DHOLD5=0
 XHOLD5=0
 T51FL=80
 CBANKS5=0
 XBANKS5=0
 RCB51 { 0,0,0,0,0,255,255,0,0 }
 RXB51 { 0,0,0,0,0,0,0,0,0 }
 OCM51 { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
 OCR51 { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
 IRO51 { 1,0,0,0,0,0,32,0,0 }
 IRA51 { 0,0,0,0,0,0,1,0,0 }
 XRA51 { 0,0,0,0,0,0,0,0,0 }
 XRA512 { 0,0,0,0,0,0,0,0,0 }
 C51FL=21630228
 C51VA=0
 C51MSC ()
 C51DEF ()
 C51UDF ()
 INCC5 ()
 AX51FL=4
 AX51MSC ()
 AX51SET ()
 AX51RST ()
 INCA5 ()
 PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
 IncBld=1
 AlwaysBuild=0
 GenAsm=0
 AsmAsm=0
 PublicsOnly=0
 StopCode=3
 CustArgs ()
 LibMods ()
 BankNo=65535
 LX51FL=292
 LX51OVL ()
 LX51MSC ()
 LX51DWN ()
 LX51LFI ()
 LX51ASN ()
 LX51RES ()
 LX51CCL ()
 LX51UCL ()
 LX51CSC ()
 LX51UCS ()
 LX51COB ()
 LX51XDB ()
 LX51PDB ()
 LX51BIB ()
 LX51DAB ()
 LX51IDB ()
 LX51PRC ()
 LX51STK ()
 LX51COS ()
 LX51XDS ()
 LX51BIS ()
 LX51DAS ()
 LX51IDS ()
  OPTDL (S8051.DLL)()(DP51.DLL)(-p52)(S8051.DLL)()(TP51.DLL)(-p52)
  OPTDBG 509,0,()()()()()()()()()() ()()()()
 FLASH1 { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
 FLASH2 ()
 FLASH3 ()
EndOpt