16c64a.h

无刷控制器光火凤凰一房一价故意一一个机会呱唧呱唧很快

//////// Standard Header file for the PIC16C64A device ////////
#device PIC16C64A
#nolist
/////////////////////////////// I/O definitions for INPUT() and OUTPUT_xxx()
#define PIN_A0  40
#define PIN_A1  41
#define PIN_A2  42
#define PIN_A3  43
#define PIN_A4  44
#define PIN_A5  45

#define PIN_B0  48
#define PIN_B1  49
#define PIN_B2  50
#define PIN_B3  51
#define PIN_B4  52
#define PIN_B5  53
#define PIN_B6  54
#define PIN_B7  55

#define PIN_C0  56
#define PIN_C1  57
#define PIN_C2  58
#define PIN_C3  59
#define PIN_C4  60
#define PIN_C5  61
#define PIN_C6  62
#define PIN_C7  63

#define PIN_D0  64
#define PIN_D1  65
#define PIN_D2  66
#define PIN_D3  67
#define PIN_D4  68
#define PIN_D5  69
#define PIN_D6  70
#define PIN_D7  71

#define PIN_E0  72
#define PIN_E1  73
#define PIN_E2  74

/////////////////////////////// Useful defines
#define FALSE 0
#define TRUE 1

#define BYTE int
#define BOOLEAN short int

#define getc getch
#define getchar getch
#define puts(s) {printf(s); putchar(13); putchar(10);}
#define putc putchar

/////////////////////////////// Constants used for RESTART_CAUSE()
#define WDT_FROM_SLEEP  0
#define WDT_TIMEOUT     8
#define MCLR_FROM_SLEEP 16
#define NORMAL_POWER_UP 24
/////////////////////////////// Constants used for SETUP_COUNTERS()
#define RTCC_INTERNAL   0
#define RTCC_EXT_L_TO_H 32
#define RTCC_EXT_H_TO_L 48
#define RTCC_DIV_2      0
#define RTCC_DIV_4      1
#define RTCC_DIV_8      2
#define RTCC_DIV_16     3
#define RTCC_DIV_32     4
#define RTCC_DIV_64     5
#define RTCC_DIV_128    6
#define RTCC_DIV_256    7
#define WDT_18MS        8
#define WDT_36MS        9
#define WDT_72MS       10
#define WDT_144MS      11
#define WDT_288MS      12
#define WDT_576MS      13
#define WDT_1152MS     14
#define WDT_2304MS     15
#define L_TO_H              0x40
#define H_TO_L                 0

#define RTCC_ZERO           0x0B20    // Used for ENABLE/DISABLE INTERRUPTS
#define RB_CHANGE           0x0B08    // Used for ENABLE/DISABLE INTERRUPTS
#define EXT_INT             0x0B10    // Used for ENABLE/DISABLE INTERRUPTS
#define GLOBAL              0x0BC0    // Used for ENABLE/DISABLE INTERRUPTS

///////////////////////////////////// Constants used for Timer1 and Timer2
#define T1_DISABLED         0
#define T1_INTERNAL         5
#define T1_EXTERNAL         7
#define T1_EXTERNAL_SYNC    3
#define T1_CLK_OUT          8
#define T1_DIV_BY_1         0
#define T1_DIV_BY_2         0x10
#define T1_DIV_BY_4         0x20
#define T1_DIV_BY_8         0x30
#byte   TIMER_1_LOW=        0x0e
#byte   TIMER_1_HIGH=       0x0f
#define T2_DISABLED         0
#define T2_DIV_BY_1         4
#define T2_DIV_BY_4         5
#define T2_DIV_BY_16        6
#byte   TIMER_2=            0x11

#define INT_TIMER1          0x8C01    // Used for ENABLE/DISABLE INTERRUPTS
#define INT_TIMER2          0x8C02    // Used for ENABLE/DISABLE INTERRUPTS

//////////////////////////////////// Constants used for SETUP_CCP1()
#define CCP_OFF                         0
#define CCP_CAPTURE_FE                  4
#define CCP_CAPTURE_RE                  5
#define CCP_CAPTURE_DIV_4               6
#define CCP_CAPTURE_DIV_16              7
#define CCP_COMPARE_SET_ON_MATCH        8
#define CCP_COMPARE_CLR_ON_MATCH        9
#define CCP_COMPARE_INT                 0xA
#define CCP_COMPARE_RESET_TIMER         0xB
#define CCP_PWM                         0xC
#define CCP_PWM_PLUS_1                  0x1c
#define CCP_PWM_PLUS_2                  0x2c
#define CCP_PWM_PLUS_3                  0x3c
#byte   CCP_1_LOW=                      0x15
#byte   CCP_1_HIGH=                     0x16

#define INT_CCP1            0x8C04    // Used for ENABLE/DISABLE INTERRUPTS

//////////////////////////////////// Constants used for SETUP_PSP()
#define PSP_ENABLED                     0x10
#define PSP_DISABLED                    0
#byte   PSP_DATA=                       9
#define INT_PSP             0x8C80    // Used for ENABLE/DISABLE INTERRUPTS

//////////////////////////////////// Constants used in SETUP_SSP()
#define SPI_MASTER       0x60
#define SPI_SLAVE        0x64
#define SPI_L_TO_H       0
#define SPI_H_TO_L       0x10
#define SPI_CLK_DIV_4    0
#define SPI_CLK_DIV_16   1
#define SPI_CLK_DIV_64   2
#define SPI_CLK_T2       3
#define SPI_SS_DISABLED  1
#define INT_SSP             0x8C08    // Used for ENABLE/DISABLE INTERRUPTS

#define INT_SSP             0x8C08    // Used for ENABLE/DISABLE INTERRUPTS

#list