📄 timeset.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 11/09/2005 16:15:06
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "timeset"
BEGIN
DEVICE = "EP1K30QC208-3";
"begend" : INPUT_PIN = 80 ;
"enter" : INPUT_PIN = 79 ;
"keyup" : INPUT_PIN = 183 ;
"reset" : INPUT_PIN = 78 ;
"hourhset0" : OUTPUT_PIN = 28 ;
"hourhset1" : OUTPUT_PIN = 125 ;
"hourlset0" : OUTPUT_PIN = 187 ;
"hourlset1" : OUTPUT_PIN = 74 ;
"hourlset2" : OUTPUT_PIN = 27 ;
"hourlset3" : OUTPUT_PIN = 30 ;
"minhset0" : OUTPUT_PIN = 26 ;
"minhset1" : OUTPUT_PIN = 128 ;
"minhset2" : OUTPUT_PIN = 56 ;
"minlset0" : OUTPUT_PIN = 62 ;
"minlset1" : OUTPUT_PIN = 198 ;
"minlset2" : OUTPUT_PIN = 126 ;
"minlset3" : OUTPUT_PIN = 18 ;
"sechset0" : OUTPUT_PIN = 16 ;
"sechset1" : OUTPUT_PIN = 19 ;
"sechset2" : OUTPUT_PIN = 17 ;
"seclset0" : OUTPUT_PIN = 31 ;
"seclset1" : OUTPUT_PIN = 206 ;
"seclset2" : OUTPUT_PIN = 29 ;
"seclset3" : OUTPUT_PIN = 127 ;
"settime" : OUTPUT_PIN = 38 ;
"adjsta~1" : LOCATION = LC2_D28;
"adjsta~2" : LOCATION = LC4_D33;
"adjsta~3" : LOCATION = LC1_D27;
"adjsta~4" : LOCATION = LC2_D27;
"adjsta~5" : LOCATION = LC3_D34;
"adjsta~6" : LOCATION = LC8_D19;
"adjsta~7" : LOCATION = LC1_D28;
"|LPM_ADD_SUB:247|addcore:adder|:59" : LOCATION = LC7_D19;
"|LPM_ADD_SUB:300|addcore:adder|:59" : LOCATION = LC8_D27;
"|LPM_ADD_SUB:353|addcore:adder|:59" : LOCATION = LC2_D33;
":26" : LOCATION = LC4_E29; -- setmark
":27" : LOCATION = LC8_D28; -- hourhigh1
":28" : LOCATION = LC4_D28; -- hourhigh0
":29" : LOCATION = LC6_D19; -- hourlow3
":30" : LOCATION = LC3_D19; -- hourlow2
":31" : LOCATION = LC2_D19; -- hourlow1
":32" : LOCATION = LC4_D19; -- hourlow0
":33" : LOCATION = LC5_D34; -- minhigh2
":34" : LOCATION = LC1_D34; -- minhigh1
":35" : LOCATION = LC2_D34; -- minhigh0
":36" : LOCATION = LC3_D27; -- minlow3
":37" : LOCATION = LC5_D27; -- minlow2
":38" : LOCATION = LC7_D27; -- minlow1
":39" : LOCATION = LC6_D27; -- minlow0
":40" : LOCATION = LC2_C27; -- sechigh2
":41" : LOCATION = LC4_C27; -- sechigh1
":42" : LOCATION = LC1_C27; -- sechigh0
":43" : LOCATION = LC3_D33; -- seclow3
":44" : LOCATION = LC5_D33; -- seclow2
":45" : LOCATION = LC6_D33; -- seclow1
":46" : LOCATION = LC7_D33; -- seclow0
"~453~1" : LOCATION = LC1_D19;
"~453~2" : LOCATION = LC1_D33;
"~516~1" : LOCATION = LC8_D33;
"~600~1" : LOCATION = LC4_D27;
"~663~1" : LOCATION = LC4_D34;
"~747~1" : LOCATION = LC5_D19;
END;
INTERNAL_INFO "timeset"
BEGIN
DEVICE = EP1K30QC208-3;
LC4_D33 : LORAX = "1:MSW3R3C33,G8R3,PA10R3C27->LC1_D28|";
LC1_D27 : LORAX = "1:MSW0R3C26,G65R3,PA18R3C32->LC4_D33,->LC1_D33,->LC8_D33|";
LC2_D27 : LORAX = "1:MSW1R3C27,HHR9R3,PA13R3C32->LC1_D33,->LC8_D33|";
LC3_D34 : LORAX = "1:MSW2R3C33,HHR21R3|2:PA13R3C18->LC1_D19|,2:PA13R3C26->LC2_D27,->LC4_D27||";
LC8_D19 : LORAX = "1:MSW7R3C18,G118R3|2:PA9R3C26->LC4_D27|,2:PA9R3C33->LC3_D34,->LC4_D34||";
LC1_D28 : LORAX = "1:MSW1R3C26,G47R3|2:PA3R3C18->LC8_D19,->LC1_D19,->LC5_D19|,2:PA3R3C26->LC4_D27|,2:PA3R3C33->LC4_D34||";
OD3P80 : LORAX = "1:FB3->LC4_E29|";
OD5P79 : LORAX = "1:FB5->LC2_D28,->LC4_D33,->LC1_D27,->LC2_D27,->LC3_D34,->LC8_D19,->LC1_D28|";
OD4P183 : LORAX = "1:FB4->LC8_D28,->LC4_D28,->LC6_D19,->LC3_D19,->LC2_D19,->LC4_D19,->LC5_D34,->LC1_D34,->LC2_D34,->LC3_D27,->LC5_D27,->LC7_D27,->LC6_D27,->LC2_C27,->LC4_C27,->LC1_C27,->LC3_D33,->LC5_D33,->LC6_D33,->LC7_D33|";
OD2P78 : LORAX = "1:FB2->LC2_D28,->LC4_D33,->LC1_D27,->LC2_D27,->LC3_D34,->LC8_D19,->LC1_D28,->LC4_E29,->LC8_D28,->LC4_D28,->LC6_D19,->LC3_D19,->LC2_D19,->LC4_D19,->LC5_D34,->LC1_D34,->LC2_D34,->LC3_D27,->LC5_D27,->LC7_D27,->LC6_D27,->LC2_C27,->LC4_C27,->LC1_C27,->LC3_D33,->LC5_D33,->LC6_D33,->LC7_D33|";
LC4_E29 : LORAX = "1:MSW3R4C28,HHR25R4->OH3R4P38|";
LC8_D28 : LORAX = "1:MSW7R3C27,G74R3->OH15R3P125|";
LC4_D28 : LORAX = "1:MSW3R3C27,G30R3->OH3R3P28|";
LC6_D19 : LORAX = "1:MSW5R3C19,HHR50R3->OH5R3P30|";
LC3_D19 : LORAX = "1:MSW2R3C19,HHR12R3->OH2R3P27|";
LC2_D19 : LORAX = "1:MSW1R3C19,V4C19->OV3C19P74|";
LC4_D19 : LORAX = "1:MSW3R3C19,V9C19->OV0C19P187|";
LC5_D34 : LORAX = "1:MSW5R3C32,V15C32->OV2C32P56|";
LC1_D34 : LORAX = "1:MSW0R3C33,G58R3->OH8R3P128|";
LC2_D34 : LORAX = "1:MSW1R3C33,HHR2R3->OH1R3P26|";
LC3_D27 : LORAX = "1:MSW2R3C26,V6C26,HHR19R2->OH2R2P18|";
LC5_D27 : LORAX = "1:MSW4R3C26,G116R3->OH12R3P126|";
LC7_D27 : LORAX = "1:MSW6R3C27,V18C27->OV0C27P198|";
LC6_D27 : LORAX = "1:MSW5R3C27,V16C27->OV3C27P62|";
LC2_C27 : LORAX = "1:MSW1R2C26,HHR9R2->OH1R2P17|";
LC4_C27 : LORAX = "1:MSW3R2C27,HHR26R2->OH3R2P19|";
LC1_C27 : LORAX = "1:MSW0R2C26,HHR1R2->OH0R2P16|";
LC3_D33 : LORAX = "1:MSW2R3C32,G51R3->OH10R3P127|";
LC5_D33 : LORAX = "1:MSW4R3C32,HHR64R3->OH4R3P29|";
LC6_D33 : LORAX = "1:MSW5R3C33,V15C33->OV0C33P206|";
LC7_D33 : LORAX = "1:MSW6R3C32,G119R3->OH6R3P31|";
LC1_D19 : LORAX = "1:MSW0R3C18,HHR23R3,PA1R3C32->LC1_D33,->LC8_D33|";
LC8_D33 : LORAX = "1:MSW7R3C32,V22C32,HHR61R2,PA0R2C26->LC2_C27,->LC4_C27,->LC1_C27|";
LC4_D33 : LORAX2 = "X, X, X, LC1_D27";
LC1_D27 : LORAX2 = "X, X, X, LC2_D27";
LC2_D27 : LORAX2 = "X, X, X, LC3_D34";
LC3_D34 : LORAX2 = "X, X, X, LC8_D19";
LC8_D19 : LORAX2 = "X, X, X, LC1_D28";
LC1_D28 : LORAX2 = "X, X, LC2_D28, LC4_D33";
LC7_D19 : LORAX2 = "X, X, LC4_D19, LC2_D19";
LC8_D27 : LORAX2 = "X, X, LC6_D27, LC7_D27";
LC2_D33 : LORAX2 = "X, X, LC7_D33, LC6_D33";
LC4_E29 : LORAX2 = "X, X, X, LC4_E29";
LC8_D28 : LORAX2 = "X, LC1_D28, LC8_D28, LC4_D28";
LC4_D28 : LORAX2 = "X, X, LC1_D28, LC4_D28";
LC6_D19 : LORAX2 = "LC5_D19, LC7_D19, LC6_D19, LC3_D19";
LC3_D19 : LORAX2 = "LC5_D19, LC3_D19, LC2_D19, LC4_D19";
LC2_D19 : LORAX2 = "X, LC5_D19, LC2_D19, LC4_D19";
LC4_D19 : LORAX2 = "X, X, LC5_D19, LC4_D19";
LC5_D34 : LORAX2 = "LC4_D34, LC5_D34, LC1_D34, LC2_D34";
LC1_D34 : LORAX2 = "X, LC4_D34, LC1_D34, LC2_D34";
LC2_D34 : LORAX2 = "X, X, LC4_D34, LC2_D34";
LC3_D27 : LORAX2 = "LC4_D27, LC8_D27, LC3_D27, LC5_D27";
LC5_D27 : LORAX2 = "LC4_D27, LC5_D27, LC7_D27, LC6_D27";
LC7_D27 : LORAX2 = "X, LC4_D27, LC7_D27, LC6_D27";
LC6_D27 : LORAX2 = "X, X, LC4_D27, LC6_D27";
LC2_C27 : LORAX2 = "LC8_D33, LC2_C27, LC4_C27, LC1_C27";
LC4_C27 : LORAX2 = "X, LC8_D33, LC4_C27, LC1_C27";
LC1_C27 : LORAX2 = "X, X, LC8_D33, LC1_C27";
LC3_D33 : LORAX2 = "LC2_D33, LC1_D33, LC3_D33, LC5_D33";
LC5_D33 : LORAX2 = "LC1_D33, LC5_D33, LC6_D33, LC7_D33";
LC6_D33 : LORAX2 = "X, LC1_D33, LC6_D33, LC7_D33";
LC7_D33 : LORAX2 = "X, X, LC1_D33, LC7_D33";
LC1_D19 : LORAX2 = "X, LC3_D34, LC8_D19, LC1_D28";
LC1_D33 : LORAX2 = "LC1_D27, LC4_D33, LC2_D27, LC1_D19";
LC8_D33 : LORAX2 = "X, LC1_D27, LC2_D27, LC1_D19";
LC4_D27 : LORAX2 = "LC2_D27, LC3_D34, LC1_D28, LC8_D19";
LC4_D34 : LORAX2 = "X, LC3_D34, LC8_D19, LC1_D28";
LC5_D19 : LORAX2 = "X, X, LC8_D19, LC1_D28";
END;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -