dm9601.c

采用DM9601芯片的usb网卡驱动for Linux

/*
**	DM9601: USB 10/100Mbps/HomePNA (1Mbps) Fast Ethernet
**
**	Copyright (c) 1999,2000 Petko Manolov - Petkan ([e-mail])
**	
**
**	ChangeLog:
**	v0.01		 Work for DM9601 now.
**	v0.02		 rename to dm9601.
**	v0.03		 Debug TX full to cause TX hang problem.
**	v0.04		 Support MAC/Hash address
**			 REG5 get better RX performance when bit4=0
**			 Power-Down PHY when driver close
**	v0.05		 Support dynamic reset
**			 Support automatically switch IntPHY/EXT MII
**			 Support REG_8, REG_9, REG_A for flow control
**	V0.06   06/14/01 Dynamic select INT/EXT MII by REG1 bit 4
**			 Support Force and Auto mode
**	V0.07	06/14/01 Program HPNA chip E3/E4/E5
**	V0.08	06/15/01 Enable REG_F4 bit5 to force "INT always return"
**	V0.09	06/19/01 Default set REG_0A bit3 to enable BP with DA match
**		06/22/01 Modify DM9801 progrmming	
**			 E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
**			 E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
**			     R17 = (R17 & 0xfff0) | NF + 3
**			 E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
**			     R17 = (R17 & 0xfff0) | NF
**
**      V1.00   03/05/03 Weilun Huang <[e-mail]>:
**			 Added semaphore mechanism to solve the problem. 
**			 While device is being plugged, it makes kernel 
**			 hang on VIA chipset. Removed the devrequest typedef 
**			 use "struct usb_ctrlrequest".
**	v1.01   06/01/12 Michael shen <[e-mail]>:
**			 modify argument of try_module_get and module_put
**			 to be THIS_MODULE to pass compiling for kernel 2.6.9
*/

/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */

#include <linux/version.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/usb.h>
#include <linux/module.h>
#include <linux/crc32.h>
#include "dm9601.h"
extern int usb_set_configuration(struct usb_device *dev, int configuration);


#define	DM9601_USE_INTR

static const char *version = __FILE__ ": v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([e-mail])";

static struct usb_eth_dev usb_dev_id[] = {
#define	DM9601_DEV(pn, vid, pid, flags)	\
	{name:pn, vendor:vid, device:pid, private:flags},
#include "dm9601.h"
#undef	DM9601_DEV
	{NULL, 0, 0, 0}
};

static struct usb_device_id dm9601_ids[] = {
#define	DM9601_DEV(pn, vid, pid, flags) \
	{match_flags: USB_DEVICE_ID_MATCH_DEVICE, idVendor:vid, idProduct:pid},
#include "dm9601.h"
#undef	DM9601_DEV
	{ }
};

/* For module input parameter */
static int mode = DM9601_AUTO, dm9601_mode;
static 	int reg5 = DM9601_REG5, reg8 = DM9601_REG8, reg9 = DM9601_REG9, 
	rega = DM9601_REGA, nfloor = 0;

MODULE_AUTHOR("Petko Manolov <[e-mail]>");
MODULE_DESCRIPTION("DAVICOM DM9601 USB Fast Ethernet driver");
MODULE_LICENSE("Dual BSD/GPL");

/*
 * USB-status codes: not defined in 2.6
 * USB_ST* maps to -E* and should go away in the future
 */

#define USB_ST_NOERROR		0
#define USB_ST_CRC		(-EILSEQ)
#define USB_ST_BITSTUFF		(-EPROTO)
#define USB_ST_NORESPONSE	(-ETIMEDOUT)			/* device not responding/handshaking */
#define USB_ST_DATAOVERRUN	(-EOVERFLOW)
#define USB_ST_DATAUNDERRUN	(-EREMOTEIO)
#define USB_ST_BUFFEROVERRUN	(-ECOMM)
#define USB_ST_BUFFERUNDERRUN	(-ENOSR)
#define USB_ST_INTERNALERROR	(-EPROTO) 			/* unknown error */
#define USB_ST_SHORT_PACKET    	(-EREMOTEIO)
#define USB_ST_PARTIAL_ERROR  	(-EXDEV)			/* ISO transfer only partially completed */
#define USB_ST_URB_KILLED     	(-ENOENT)			/* URB canceled by user */
#define USB_ST_URB_PENDING       (-EINPROGRESS)
#define USB_ST_REMOVED		(-ENODEV) 			/* device not existing or removed */
#define USB_ST_TIMEOUT		(-ETIMEDOUT)			/* communication timed out, also in urb->status**/
#define USB_ST_NOTSUPPORTED	(-ENOSYS)			
#define USB_ST_BANDWIDTH_ERROR	(-ENOSPC)			/* too much bandwidth used */
#define USB_ST_URB_INVALID_ERROR  (-EINVAL)			/* invalid value/transfer type */
#define USB_ST_URB_REQUEST_ERROR  (-ENXIO)			/* invalid endpoint */
#define USB_ST_STALL		(-EPIPE) 			/* pipe stalled, also in urb->status*/

module_param(mode, int,0644);
module_param(reg5,int,0644);
module_param(reg8,int,0644);
module_param(reg9,int,0644);
module_param(rega,int,0644);
module_param(nfloor,int,0644);

MODULE_PARM_DESC(mode, "Media mode select: 0:10MH 1:100MHF 4:10MF 5:100MF 8:AUTO");

MODULE_DEVICE_TABLE (usb, dm9601_ids);

#if 0
static int write_eprom_word(dm9601_board_info_t *, __u8, __u16);
#endif
static int update_eth_regs_async(dm9601_board_info_t *);

/* Aargh!!! I _really_ hate such tweaks */
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
static void ctrl_callback(struct urb *urb, struct pt_regs* regs)
#else
static void ctrl_callback(struct urb *urb)
#endif
{
	dm9601_board_info_t	*dbi = urb->context;

	if (!dbi)
		return;

	switch (urb->status & 0xff) {
		case USB_ST_NOERROR:
		case 0x92:
			if (dbi->flags & ALL_REGS_CHANGE) {
				update_eth_regs_async(dbi);
				return;
			}
			break;
		case USB_ST_URB_PENDING:
		case 0x8d:
			return;
		case USB_ST_URB_KILLED:
			break;
		default:
			warn("%s: status %x",__FUNCTION__, urb->status);
	}

	dbi->flags &= ~ALL_REGS_CHANGED;
	
	if (dbi->flags & CTRL_URB_SLEEP) {
		dbi->flags &= ~CTRL_URB_SLEEP;
		wake_up_interruptible(&dbi->ctrl_wait);
	}
}


static int get_registers(dm9601_board_info_t *dbi, __u16 indx, __u16 size, void *data)
{
	int	ret;
	DECLARE_WAITQUEUE(wait, current);

	while ( dbi->flags & ALL_REGS_CHANGED ) {
		dbi->flags |= CTRL_URB_SLEEP;
		interruptible_sleep_on( &dbi->ctrl_wait );
	}
	
	dbi->dr.bRequestType = DM9601_REQT_READ;
	dbi->dr.bRequest     = DM9601_REQ_GET_REGS;
	dbi->dr.wValue       = cpu_to_le16 (0);
	dbi->dr.wIndex       = cpu_to_le16p(&indx);
	dbi->dr.wLength      = cpu_to_le16p(&size);
	dbi->ctrl_urb.transfer_buffer_length = size;

	usb_fill_control_urb( &dbi->ctrl_urb,
	                      dbi->usb,
	                      usb_rcvctrlpipe(dbi->usb,0),
	                      (char *)&dbi->dr,
	                      data, 
	                      size, 
	                      ctrl_callback, 
	                      (void *)dbi );

	add_wait_queue( &dbi->ctrl_wait, &wait );
	set_current_state( TASK_INTERRUPTIBLE );
	dbi->flags |= CTRL_URB_SLEEP;

	if ( (ret = usb_submit_urb( &dbi->ctrl_urb ,GFP_ATOMIC)) ) {
		err("%s: BAD CTRLs %d",__FUNCTION__,ret);
		goto out;
	}

	schedule();
	remove_wait_queue( &dbi->ctrl_wait, &wait );
out:
	return	ret;
}


static int set_registers(dm9601_board_info_t *dbi, __u16 indx, __u16 size, void *data)
{
	int	ret;
	DECLARE_WAITQUEUE(wait, current);

	while (dbi->flags & ALL_REGS_CHANGED) {
		dbi->flags |= CTRL_URB_SLEEP ;
		interruptible_sleep_on(&dbi->ctrl_wait);
	}
	
	dbi->dr.bRequestType = DM9601_REQT_WRITE;
	dbi->dr.bRequest     = DM9601_REQ_SET_REGS;
	dbi->dr.wValue       = cpu_to_le16(0);
	dbi->dr.wIndex       = cpu_to_le16p(&indx);
	dbi->dr.wLength      = cpu_to_le16p(&size);
	dbi->ctrl_urb.transfer_buffer_length = size;

	usb_fill_control_urb(&dbi->ctrl_urb, dbi->usb,
			  usb_sndctrlpipe(dbi->usb, 0),
			  (char *)&dbi->dr,
			  data, size, ctrl_callback, (void *)dbi);
			  
	add_wait_queue(&dbi->ctrl_wait, &wait);
	set_current_state(TASK_INTERRUPTIBLE);
	dbi->flags |= CTRL_URB_SLEEP;

	if ( (ret = usb_submit_urb(&dbi->ctrl_urb,GFP_ATOMIC)) ) {
		err("%s: BAD CTRL %d",__FUNCTION__,ret);
		return	ret;
	}

	schedule();
	remove_wait_queue( &dbi->ctrl_wait, &wait );

	return	ret;
}


static int set_register( dm9601_board_info_t *dbi, __u16 indx, __u8 data )
{
	int	ret;
	__u16 dat = data;
	DECLARE_WAITQUEUE(wait, current);
	
	while ( dbi->flags & ALL_REGS_CHANGED ) {
		dbi->flags |= CTRL_URB_SLEEP;
		interruptible_sleep_on( &dbi->ctrl_wait );
	}
	
	dbi->dr.bRequestType = DM9601_REQT_WRITE;
	dbi->dr.bRequest     = DM9601_REQ_SET_REG;
	dbi->dr.wValue 	     = cpu_to_le16p( &dat);
	dbi->dr.wIndex 	     = cpu_to_le16p( &indx );
	dbi->dr.wLength      = cpu_to_le16( 0 );
	dbi->ctrl_urb.transfer_buffer_length = 0;

	usb_fill_control_urb( &dbi->ctrl_urb, dbi->usb,
			  usb_sndctrlpipe(dbi->usb,0),
			  (char *)&dbi->dr,
			  &data, 0, ctrl_callback, (void *)dbi );

	add_wait_queue( &dbi->ctrl_wait, &wait );
	set_current_state( TASK_INTERRUPTIBLE );
	dbi->flags |= CTRL_URB_SLEEP;

	if ( (ret = usb_submit_urb( &dbi->ctrl_urb ,GFP_ATOMIC)) ) {
		err("%s: BAD CTRL %d",__FUNCTION__,ret);
		return	ret;
	}

	schedule();
	remove_wait_queue( &dbi->ctrl_wait, &wait );

	return	ret;
}

static int update_eth_regs_async( dm9601_board_info_t *dbi )
{
	int	ret;

	if (dbi->flags & HASH_REGS_CHANGE) {
		dbi->flags &= ~HASH_REGS_CHANGE;
		dbi->flags |= HASH_REGS_CHANGED;
		dbi->dr.bRequestType = DM9601_REQT_WRITE;
		dbi->dr.bRequest     = DM9601_REQ_SET_REGS;
		dbi->dr.wValue       = cpu_to_le16(0);
		dbi->dr.wIndex       = cpu_to_le16(0x16);
		dbi->dr.wLength      = cpu_to_le16(8);
		dbi->ctrl_urb.transfer_buffer_length = 8;

		usb_fill_control_urb( &dbi->ctrl_urb, dbi->usb,
			  usb_sndctrlpipe(dbi->usb,0),
			  (char *)&dbi->dr,
			  dbi->hash_table, 8, ctrl_callback, (void *)dbi );
	} else if (dbi->flags & RX_CTRL_CHANGE) {
		dbi->flags &= ~RX_CTRL_CHANGE;
		dbi->flags |= RX_CTRL_CHANGED;
		dbi->dr.bRequestType = DM9601_REQT_WRITE;
		dbi->dr.bRequest     = DM9601_REQ_SET_REG;
		dbi->dr.wValue       = cpu_to_le16(dbi->rx_ctrl_reg);
		dbi->dr.wIndex       = cpu_to_le16(0x5);
		dbi->dr.wLength       = cpu_to_le16(0);
		dbi->ctrl_urb.transfer_buffer_length = 0;

		usb_fill_control_urb( &dbi->ctrl_urb, dbi->usb,
			  usb_sndctrlpipe(dbi->usb,0),
			  (char *)&dbi->dr,
			  &dbi->rx_ctrl_reg, 0, ctrl_callback, (void *)dbi );
	} else {
		dbi->flags &= ~NET_CTRL_CHANGE;
		dbi->flags |= NET_CTRL_CHANGED;
		dbi->dr.bRequestType = DM9601_REQT_WRITE;
		dbi->dr.bRequest     = DM9601_REQ_SET_REG;
		dbi->dr.wValue       = cpu_to_le16(dbi->net_ctrl_reg);
		dbi->dr.wIndex       =  cpu_to_le16(0x0);
		dbi->dr.wLength      = cpu_to_le16(0);
		dbi->ctrl_urb.transfer_buffer_length = 0;

		usb_fill_control_urb( &dbi->ctrl_urb, dbi->usb,
			  usb_sndctrlpipe(dbi->usb,0),
			  (char *)&dbi->dr,
			  &dbi->net_ctrl_reg, 0, ctrl_callback, (void *)dbi );
	}

	if ( (ret = usb_submit_urb( &dbi->ctrl_urb ,GFP_KERNEL)) )
		err("%s: BAD CTRL %d, flags %x",__FUNCTION__,ret,dbi->flags );

	return	ret;
}

static int read_mii_word( dm9601_board_info_t *dbi, __u8 phy, __u8 index, __u16 *regd )
{
	set_register( dbi, 0x0c, index | 0x40 );
	set_register( dbi, 0x0b, 0x0c );
	udelay(100);
	set_register( dbi, 0x0b, 0x0 );
	get_registers( dbi, 0xd, 2, regd);

	return 0;
}


static int write_mii_word( dm9601_board_info_t *dbi, __u8 phy, __u8 index, __u16 regd )
{
	set_register( dbi, 0x0c, index | 0x40 );
	set_registers( dbi, 0xd, 2, &regd);
	set_register( dbi, 0x0b, 0x0a );
	udelay(100);
	set_register( dbi, 0x0b, 0x0 );

	return 0;
}


static int read_eprom_word( dm9601_board_info_t *dbi, __u8 index, __u16 *retdata )
{
	set_register( dbi, 0x0c, index );
	set_register( dbi, 0x0b, 0x4 );
	udelay(100);
	set_register( dbi, 0x0b, 0x0 );
	get_registers( dbi, 0xd, 2, retdata);

	return 0;
}

#if 0
static int write_eprom_word( dm9601_board_info_t *dbi, __u8 index, __u16 data )
{
	set_register(dbi, 0x0c, index);
	set_registers(dbi, 0x0d, 2, &data);
	set_register(dbi, 0x0b, 0x12);
	udelay(100);
	set_register(dbi, 0x0b, 0x0);
	return 0;
}
#endif

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
static void read_bulk_callback( struct urb *urb, struct pt_regs* reg )
#else
static void read_bulk_callback( struct urb *urb)
#endif
{
	dm9601_board_info_t *dbi = urb->context;
	struct net_device *net = dbi->net;
	int count = urb->actual_length, res;
	__u8 rx_status;
	struct sk_buff	*skb;
	__u16 pkt_len;
	unsigned char * bufptr;

	if ( !dbi || !(dbi->flags & DM9601_RUNNING) )
		return;

	if ( !netif_device_present(net) )
		return;

	if ( dbi->flags & DM9601_RX_BUSY ) {
		dbi->stats.rx_errors++;
		dbg("DM9601 Rx busy");
		return;
	}
	dbi->flags |= DM9601_RX_BUSY;

	switch ( urb->status ) {
		case USB_ST_NOERROR:
			break;
		case USB_ST_NORESPONSE:
			dbg( "reset MAC" );
			dbi->flags &= ~DM9601_RX_BUSY;
			break;
		default:
#ifdef RX_IMPROVE
			dbg("%s: RX status %d",net->name, urb->status );
			goto goon;
#endif
		;
	}

/* For RX improve ---------------------------*/
#ifdef RX_IMPROVE
	if (dbi->rx_buf_flag) {
		bufptr = dbi->rx_buff;
		usb_fill_bulk_urb( &dbi->rx_urb, dbi->usb,
				usb_rcvbulkpipe(dbi->usb, 1),
				dbi->rx_buff2, DM9601_MAX_MTU, 
				read_bulk_callback, dbi );
	} else {
		bufptr = dbi->rx_buff2;
		usb_fill_bulk_urb( &dbi->rx_urb, dbi->usb,
				usb_rcvbulkpipe(dbi->usb, 1),
				dbi->rx_buff, DM9601_MAX_MTU, 
				read_bulk_callback, dbi );
	}

	if ( (res = usb_submit_urb(&dbi->rx_urb,GFP_ATOMIC)) )
		warn("%s: failed submint rx_urb %d",__FUNCTION__,res);

	dbi->flags &= ~DM9601_RX_BUSY;
	dbi->rx_buf_flag = dbi->rx_buf_flag ? 0:1;
#else
	bufptr = dbi->rx_buff;
#endif
/* ----------------------------------------------------------*/

	if ( !count )
		goto goon;

	rx_status = *(__u8 *)(bufptr);
	pkt_len = *(__u16 *)(bufptr + 1) - 4;

	dbi->stats.rx_bytes += pkt_len;
	if ( (rx_status & 0xbf) || (pkt_len > 1518) ) {
		dbi->stats.rx_errors++;
		if (pkt_len > 1518) dbi->rx_longf_errors++;
		if (rx_status & 0x80) dbi->rx_runtf_errors++;
		if (rx_status & 0x20) dbi->rx_lc_errors++;
		if (rx_status & 0x10) dbi->rx_wdt_errors++;
		if (rx_status & 0x08) dbi->rx_ple_errors++;
		if (rx_status & 0x04) dbi->stats.rx_frame_errors++;
		if (rx_status & 0x02) dbi->stats.rx_crc_errors++;
		if (rx_status & 0x1) dbi->stats.rx_fifo_errors++;
		goto goon;
	}

	if ( !(skb = dev_alloc_skb(pkt_len + 2)) )
		goto goon;

	skb->dev = net;
	skb_reserve(skb, 2);
	memcpy(skb_put(skb, pkt_len), bufptr + 3, pkt_len);

	skb->protocol = eth_type_trans(skb, net);
	netif_rx(skb);
	dbi->stats.rx_packets++;
	dbi->stats.rx_bytes += pkt_len;

goon:
#ifndef RX_IMPROVE
	usb_fill_bulk_urb( &dbi->rx_urb, 
	                   dbi->usb,
	                   usb_rcvbulkpipe(dbi->usb, 1),
	                   dbi->rx_buff, 
	                   DM9601_MAX_MTU, 
	                   read_bulk_callback, 
	                   (void *)dbi );
	if ( (res = usb_submit_urb(&dbi->rx_urb,GFP_ATOMIC)) )
		warn("%s: failed submint rx_urb %d",__FUNCTION__,res);
	dbi->flags &= ~DM9601_RX_BUSY;
#endif
}

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
static void write_bulk_callback( struct urb *urb, struct pt_regs* reg )
#else
static void write_bulk_callback( struct urb *urb)
#endif
{
	dm9601_board_info_t *dbi = urb->context;

	if ( !dbi || !(dbi->flags & DM9601_RUNNING) )
		return;

	if ( !netif_device_present(dbi->net) )
		return;
		
	if ( urb->status )
		info("%s: TX status %d", dbi->net->name, urb->status);

	dbi->net->trans_start = jiffies;
	netif_wake_queue( dbi->net );
}

#ifdef	DM9601_USE_INTR
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
static void intr_callback( struct urb *urb ,struct pt_regs* pt)
#else
static void intr_callback( struct urb *urb)
#endif
{
	dm9601_board_info_t *dbi = urb->context;
	struct net_device *net;
	__u8	*d;

	if ( !dbi )
		return;
		
	switch ( urb->status ) {
		case USB_ST_NOERROR:
			break;
		case USB_ST_URB_KILLED:
			return;
		default:
			info("intr status %d", urb->status);
	}