timercontrol.opt

这是我用AT89C51单片机做的定时控制器,最多可以输出八个不同时间段的脉冲.并且用TS1602 LCD显示出来.文件中包括源程序电路图和仿真电路图

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,2,0,0,0,0,0,<.\STARTUP.A51><STARTUP.A51> 
OPTFFF 1,2,5,318767104,0,1,19,0,<.\Port.h><Port.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,44,0,0,0,44,0,0,0,246,2,0,0,187,1,0,0 }
OPTFFF 1,3,1,570425345,0,116,116,0,<.\TS1620.C><TS1620.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,66,0,0,0,66,0,0,0,12,3,0,0,209,1,0,0 }
OPTFFF 1,4,5,0,0,1,18,0,<.\TS1620.h><TS1620.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,132,0,0,0,132,0,0,0,78,3,0,0,19,2,0,0 }
OPTFFF 1,5,1,721420291,0,103,124,0,<.\Main.C><Main.C> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,154,0,0,0,154,0,0,0,100,3,0,0,41,2,0,0 }
OPTFFF 1,6,1,167772161,0,1,6,0,<.\delay.c><delay.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,0,0,0,0,0,0,0,0,202,2,0,0,143,1,0,0 }
OPTFFF 1,7,5,0,0,1,2,0,<.\delay.h><delay.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,176,0,0,0,176,0,0,0,122,3,0,0,63,2,0,0 }

ExtF <.\Port.h> 1,10,0,{ 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,44,0,0,0,44,0,0,0,246,2,0,0,187,1,0,0 }
ExtF <.\TS1620.h> 1,18,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,132,0,0,0,132,0,0,0,78,3,0,0,19,2,0,0 }
ExtF <.\delay.h> 1,2,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,176,0,0,0,176,0,0,0,122,3,0,0,63,2,0,0 }
ExtF <C:\KEIL\C51\INC\REG51.H> 51,57,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,88,0,0,0,88,0,0,0,34,3,0,0,231,1,0,0 }
ExtF <C:\KEIL\C51\INC\INTRINS.H> 1,15,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,110,0,0,0,110,0,0,0,56,3,0,0,253,1,0,0 }

TARGOPT 1, (Target 1)
 CLK51=24000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 1,(Data Sheet)<DATASHTS\ATMEL\AT89C52_DS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\ATMEL\AT_C51ISM.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-p52)(S8051.DLL)()(TP51.DLL)(-p52)
  OPTDBG 44029,0,()()()()()()()()()() ()()()()
  OPTBB 0,0,48,1,0,0,0,0,0,0,<Main.C>()()
  OPTDF 0x2
  OPTLE <>
  OPTLC <>
EndOpt