agilent_mxa_v0.92.mdd

Agilent 仪器与MATLAB互联

            </Property>
            <Property>
               <Name>ModeOpts</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand/>
                     <QueryCommand>:INST:CAT?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>String</Type>
                  <Constraint>none</Constraint>
               </PermissibleType>
               <DefaultValue/>
               <ReadOnly>always</ReadOnly>
               <Description>Queries the instrument mode options</Description>
            </Property>
            <Property>
               <Name>PeakExcur</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:CALC:MARK:PEAK:EXC</ConfigureCommand>
                     <QueryCommand>:CALC:MARK:PEAK:EXC?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>Double</Type>
                  <Constraint>none</Constraint>
               </PermissibleType>
               <DefaultValue>0</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the peak excursion value</Description>
            </Property>
            <Property>
               <Name>PeakThres</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:CALC:MARK:PEAK:THR</ConfigureCommand>
                     <QueryCommand>:CALC:MARK:PEAK:THR?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>Double</Type>
                  <Constraint>none</Constraint>
               </PermissibleType>
               <DefaultValue>0</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the peak threshold value</Description>
            </Property>
            <Property>
               <Name>Preamp</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:POW:GAIN</ConfigureCommand>
                     <QueryCommand>:POW:GAIN?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>String</Type>
                  <Constraint>enum</Constraint>
                  <ConstraintValue>
                     <Enum Name="on" Value="1"/>
                     <Enum Name="off" Value="0"/>
                  </ConstraintValue>
               </PermissibleType>
               <DefaultValue>off</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the RF internal preamplifier state</Description>
            </Property>
            <Property>
               <Name>PresetType</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:SYST:PRES:TYPE</ConfigureCommand>
                     <QueryCommand>:SYST:PRES:TYPE?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>String</Type>
                  <Constraint>enum</Constraint>
                  <ConstraintValue>
                     <Enum Name="factory" Value="FACT"/>
                     <Enum Name="user" Value="USER"/>
                     <Enum Name="mode" Value="MODE"/>
                  </ConstraintValue>
               </PermissibleType>
               <DefaultValue>mode</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the instrument preset mode</Description>
            </Property>
            <Property>
               <Name>RefLevel</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:DISP:WIND:TRAC:Y:RLEV</ConfigureCommand>
                     <QueryCommand>:DISP:WIND:TRAC:Y:RLEV?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>Double</Type>
                  <Constraint>none</Constraint>
               </PermissibleType>
               <DefaultValue>0</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the frequency span</Description>
            </Property>
            <Property>
               <Name>ResBW</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:BAND</ConfigureCommand>
                     <QueryCommand>:BAND?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>Double</Type>
                  <Constraint>bounded</Constraint>
                  <ConstraintValue>
                     <Range Max="8000000.0" Min="1.0"/>
                  </ConstraintValue>
               </PermissibleType>
               <DefaultValue>3e6</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the resolution bandwidth</Description>
            </Property>
            <Property>
               <Name>ResBWAuto</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:BAND:AUTO</ConfigureCommand>
                     <QueryCommand>:BAND:AUTO?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>String</Type>
                  <Constraint>enum</Constraint>
                  <ConstraintValue>
                     <Enum Name="on" Value="1"/>
                     <Enum Name="off" Value="0"/>
                  </ConstraintValue>
               </PermissibleType>
               <DefaultValue>on</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the resolution bandwidth auto mode</Description>
            </Property>
            <Property>
               <Name>RFCoup</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:INP:COUP</ConfigureCommand>
                     <QueryCommand>:INP:COUP?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>String</Type>
                  <Constraint>enum</Constraint>
                  <ConstraintValue>
                     <Enum Name="ac" Value="AC"/>
                     <Enum Name="dc" Value="DC"/>
                  </ConstraintValue>
               </PermissibleType>
               <DefaultValue>ac</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the RF input coupling</Description>
            </Property>
            <Property>
               <Name>ScaleDiv</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:DISP:WIND:TRAC:Y:PDIV</ConfigureCommand>
                     <QueryCommand>:DISP:WIND:TRAC:Y:PDIV?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>Double</Type>
                  <Constraint>bounded</Constraint>
                  <ConstraintValue>
                     <Range Max="20.0" Min="0.1"/>
                  </ConstraintValue>
               </PermissibleType>
               <DefaultValue>10</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the logarithmic units per vertical graticule division on the display</Description>
            </Property>
            <Property>
               <Name>ScaleType</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:DISP:WIND:TRAC:Y:SPAC</ConfigureCommand>
                     <QueryCommand>:DISP:WIND:TRAC:Y:SPAC?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>String</Type>
                  <Constraint>enum</Constraint>
                  <ConstraintValue>
                     <Enum Name="lin" Value="LIN"/>
                     <Enum Name="log" Value="LOG"/>
                  </ConstraintValue>
               </PermissibleType>
               <DefaultValue>log</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the vertical scale type for the display</Description>
            </Property>
            <Property>
               <Name>Span</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:FREQ:SPAN</ConfigureCommand>
                     <QueryCommand>:FREQ:SPAN?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>Double</Type>
                  <Constraint>none</Constraint>
               </PermissibleType>
               <DefaultValue>2e9</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the frequency span</Description>
            </Property>
            <Property>
               <Name>StartFreq</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:FREQ:STAR</ConfigureCommand>
                     <QueryCommand>:FREQ:STAR?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>Double</Type>
                  <Constraint>bounded</Constraint>
                  <ConstraintValue>
                     <Range Max="2.7E10" Min="-1.0E8"/>
                  </ConstraintValue>
               </PermissibleType>
               <DefaultValue>0.0</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the start frequency</Description>
            </Property>
            <Property>
               <Name>StopFreq</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:FREQ:STOP</ConfigureCommand>
                     <QueryCommand>:FREQ:STOP?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>Double</Type>
                  <Constraint>bounded</Constraint>
                  <ConstraintValue>
                     <Range Max="2.7E10" Min="-1.0E8"/>
                  </ConstraintValue>
               </PermissibleType>
               <DefaultValue>2e9</DefaultValue>
               <ReadOnly>never</ReadOnly>
               <Description>Sets or queries the stop frequency</Description>
            </Property>
            <Property>
               <Name>SweepPoints</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:SWE:POIN</ConfigureCommand>
                     <QueryCommand>:SWE:POIN?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>Double</Type>
                  <Constraint>none</Constraint>
               </PermissibleType>
               <DefaultValue>1001</DefaultValue>
               <ReadOnly>always</ReadOnly>
               <Description>Queries the number of trace points</Description>
            </Property>
            <Property>
               <Name>SweepTime</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>InstrumentCommand</Type>
               <Code>
                  <Commands>
                     <ConfigureCommand>:SWE:TIME</ConfigureCommand>
                     <QueryCommand>:SWE:TIME?</QueryCommand>
                  </Commands>
               </Code>
               <PermissibleType>
                  <Type>Double</Type>
                  <Constraint>none</Constraint>
               </PermissibleType>
               <DefaultValue>0</DefaultValue>
               <ReadOnly>always</ReadOnly>
               <Description>Queries the trace sweep time</Description>
            </Property>
            <Property>
               <Name>Time</Name>
               <Location>parent</Location>
               <CapabilityGroup>Base</CapabilityGroup>
               <Type>MCode</Type>
               <Code>
                  <GetMCode>function propertyValue = getProperty(obj, propertyName)
% Return a property value.
%   This function is called to return the device or group object property
%   value. If the property is a group property, OBJ is the group object. If
%   the property is a base device property, OBJ is the device object.

interface = get(obj, 'Interface');

time = query(interface, ':SYST:TIME?');

coma_idx = find(time == ',');

hour = time(1:coma_idx(1)-1);
minute = time(coma_idx(1)+1:coma_idx(2)-1);
sec = time(coma_idx(2)+1:end-1);

propertyValue = [hour 'h ' minute 'm ' sec 's'];</GetMCode>
                  <SetMCode>function set(obj, propertyName, propertyValue)
% Set a property value.
%   This function is called to set the device or group object property
%   value. If the property is a group property, OBJ is the group object. If
%   the property is a base device property, OBJ is the device object.
</SetMCode>
               </Code>
               <PermissibleType>
                  <Type>String</Type>
                  <Constraint>none</Constraint>
               </PermissibleType>
               <DefaultValue/>
               <ReadOnly>always</ReadOnly>
               <Description>Queries the instrument time</Description>
            </Property>
            <Property>