ubl.h

TI DM6446 EVM 串口下载程序 使用环境：windows dos环境或者linux 使用前需安装mono

/* --------------------------------------------------------------------------
    FILE        : ubl.h
    PURPOSE     : UBL main header file
    PROJECT     : DaVinci User Boot-Loader and Flasher
    AUTHOR      : Daniel Allred
    DATE	    : Jan-22-2007  
 
    HISTORY
        v1.00 completion
 	        Daniel Allred - Jan-22-2007
 	    v1.10 
 	        DJA - 1-Feb-2007 - Added the fakeentry point function prototype.
 ----------------------------------------------------------------------------- */


#ifndef _UBL_H_
#define _UBL_H_

#include "tistdtypes.h"

//UBL version number
#define UBL_VERSION_STRING "1.00"
#ifdef UBL_NAND
#define UBL_FLASH_TYPE "NAND"
#else
#define UBL_FLASH_TYPE "NOR"
#endif

// Define MagicNumber constants
#define MAGIC_NUMBER_VALID (0xA1ACED00)

/* Used by UBL and RBL */
#define UBL_MAGIC_SAFE				(0xA1ACED00)		/* Safe boot mode */

/* Used by RBL when doing NAND boot */
#define UBL_MAGIC_DMA				(0xA1ACED11)		/* DMA boot mode */
#define UBL_MAGIC_IC				(0xA1ACED22)		/* I Cache boot mode */
#define UBL_MAGIC_FAST				(0xA1ACED33)		/* Fast EMIF boot mode */
#define UBL_MAGIC_DMA_IC			(0xA1ACED44)		/* DMA + ICache boot mode */
#define UBL_MAGIC_DMA_IC_FAST		(0xA1ACED55)		/* DMA + ICache + Fast EMIF boot mode */

/* Used by UBL when doing UART boot, UBL Nor Boot, or NAND boot */
#define UBL_MAGIC_BIN_IMG			(0xA1ACED66)		/* Execute in place supported*/

/* Used by UBL when doing UART boot */
#define UBL_MAGIC_NOR_RESTORE		(0xA1ACED77)		/* Download via UART & Restore NOR with binary data */
#define UBL_MAGIC_NOR_SREC_BURN		(0xA1ACED88)		/* Download via UART & Burn NOR with UBL readable header and SREC data*/
#define UBL_MAGIC_NOR_BIN_BURN      (0xA1ACED99)		/* Download via UART & Burn NOR with UBL readable header and BIN data*/
#define UBL_MAGIC_NOR_GLOBAL_ERASE	(0xA1ACEDAA)		/* Download via UART & Global erase the NOR Flash*/
#define UBL_MAGIC_NAND_SREC_BURN	(0xA1ACEDBB)		/* Download via UART & Burn NAND - Image is S-record*/
#define UBL_MAGIC_NAND_BIN_BURN		(0xA1ACEDCC)		/* Download via UART & Burn NAND - Image is binary */
#define UBL_MAGIC_NAND_GLOBAL_ERASE	(0xA1ACEDDD)		/* Download via UART & Global erase the NAND Flash*/

// Define UBL image size
#define UBL_IMAGE_SIZE      (0x00003800)

// Define maximum downloadable image size
#define MAX_IMAGE_SIZE		(0x02000000)

/* Set details of RAM */
#define RAM_START_ADDR		(0x80000000)
#define RAM_END_ADDR		(0x8FFFFFFF)

typedef struct {
	Uint32 magicNum;	/* Expected magic number */
	Uint32 entryPoint;	/* Entry point of the user application */
	Uint32 numPage;		/* Number of pages where boot loader is stored */
	Uint32 block;		/* starting block number where User boot loader is stored */
	Uint32 page;		/* starting page number where boot-loader is stored */
	Uint32 ldAddress;	/* Starting RAM address where image is to copied - XIP Mode */
} NAND_BOOT;

typedef struct {
	Uint32		magicNum;
	Uint32		entryPoint;	
	Uint32		appSize;
	Uint32		ldAddress;	/* Starting RAM address where image is to copied - XIP Mode */
} NOR_BOOT;


typedef enum BootMode_ {
	// Non secure NAND mode
	NON_SECURE_NAND = 0,
	// Non secure NOR mode
	NON_SECURE_NOR = 1,
		// Unknown mode
	UNKNOWN_MODE = 2,
	// Non secure UART mode
	NON_SECURE_UART = 3
} BootMode;

// ---------------- Function prototypes ----------------

/*
 * boot() has naked attribute (doesn't save registers since it is the entry point
 * out of boot and it doesn't have an exit point). This setup requires
 * that the gnu compiler uses the -nostdlib option. 
 */
void boot( void ) __attribute__((naked,section (".boot")));

/*
 * selfcopy() has naked attribute (doesn't save registers since it is the entry
 * point when the UBL is found at the base of the NOR Flash and then goes 
 * directly to the the boot() function, which is also naked). This setup 
 * requires that the gnu compiler uses the -nostdlib option. 
 */
void selfcopy( void ) __attribute__((naked,section (".selfcopy")));
void fake_entry( void ) __attribute__((naked,section (".fakeentry")));

Int32 main(void);
void (*APPEntry)(void);

#endif //_UBL_H_