camfollowerui.txt

proe5.0野火版下载(中文版免费下载)

# {100} (100) [0] camfollowerui.Label
Cam-Follower Connection Definition
凸轮从动机构连接定义

# [1] NameLayout.Label
Name
名称

# [2] CamDefTabs.Labels.Cam1
Cam1
凸轮1

# [3] CamDefTabs.Labels.Cam2
Cam2
凸轮2

# [4] Cam1Settings.Label
  Cam1   
  凸轮1   

# [5] Cam1SurfCurveLayout.Label
Surfaces/Curves
曲面/曲线

# [6] Cam1GeomSelButton.HelpText
Select cam curves and surfaces
选取凸轮曲线和曲面

# [7] Cam1AutoCBox.Label
Autoselect
自动选取

# [8] Cam1AutoCBox.HelpText
Automatically select cam geometry
自动选取凸轮几何

# [9] Cam1FlipButton.Label
Flip
反向

# [10] Cam1FlipButton.HelpText
Flip cam normal direction
反向凸轮法向

# [11] Cam1DepthLayout.Label
Depth Display Settings
深度显示设置

# [12] Cam1DepthMenu.HelpText
Method of determining depth of the cam
确定凸轮深度的方法

# [13] Cam1FrontRefLayout.Label
Front Reference
前参照

# [14] Cam1FrontRefButton.HelpText
Select point, vertex, edge or curve
选取点、顶点、边或曲线

# [15] Cam1BackRefLayout.Label
Back Reference
后参照

# [16] Cam1BackRefButton.HelpText
Select point, vertex, edge or curve
选取点、顶点、边或曲线

# [17] Cam1CenterRefLayout.Label
Center Reference
中心参照

# [18] Cam1CenterRefButton.HelpText
Select point, vertex, edge or curve
选取点、顶点、边或曲线

# [19] Cam1DepthValLayout.Label
Depth
深度

# [20] Cam1PointLayout.Label
Working Plane
工作面

# [21] Cam1PointSelButton.HelpText
Select a point, datum plane or planar surface \nto define the working plane. This plane \nis normal to the cam depth direction.
选取点、基准平面或平面曲面来\n定义工作面。此平面\n与凸轮深度方向垂直。

# [22] Cam2Settings.Label
  Cam2    
  凸轮2    

# [23] Cam2SurfCurveLayout.Label
Surfaces/Curves
曲面/曲线

# [24] Cam2GeomSelButton.HelpText
Select cam curves and surfaces
选取凸轮曲线和曲面

# [25] Cam2AutoCBox.Label
Autoselect
自动选取

# [26] Cam2AutoCBox.HelpText
Automatically select cam geometry
自动选取凸轮几何

# [27] Cam2FlipButton.Label
Flip
反向

# [28] Cam2FlipButton.HelpText
Flip cam normal direction
反向凸轮法向

# [29] Cam2DepthLayout.Label
Depth Display Settings
深度显示设置

# [30] Cam2FrontRefLayout.Label
Front Reference
前参照

# [31] Cam2FrontRefButton.HelpText
Select point, vertex, edge or curve
选取点、顶点、边或曲线

# [32] Cam2BackRefLayout.Label
Back Reference
后参照

# [33] Cam2BackRefButton.HelpText
Select point, vertex, edge or curve
选取点、顶点、边或曲线

# [34] Cam2CenterRefLayout.Label
Center Reference
中心参照

# [35] Cam2CenterRefButton.HelpText
Select point, vertex, edge or curve
选取点、顶点、边或曲线

# [36] Cam2DepthValLayout.Label
Depth
深度

# [37] Cam2PointLayout.Label
Working Plane
工作面

# [38] Cam2PointSelButton.HelpText
Select a point, datum plane or planar surface \nto define the working plane. This plane \nis normal to the cam depth direction.
选取点、基准平面或平面曲面来\n定义工作面。此平面\n与凸轮深度方向垂直。

# [39] properties.Label
Properties
属性

# [40] LiftoffLayout.Label
Liftoff
升离

# [41] liftoffCheckbox.Label
Enable Liftoff
启用升离

# [42] liftoffCheckbox.HelpText
Enable separation between cams
启用凸轮间的分离

# [43] liftOffInLayout.Label
Coefficeint of Restitution 
还原系数

# [44] coeRsLbl.Label
=
=

# [45] coeRsLbl.HelpText
Coefficient of Restitution
恢复系数

# [46] coeStInput.Value
1.0
1.0

# [47] frictionLay.Label
Dyn Prop
动态属性

# [48] frictionInLay.Label
Friction
摩擦

# [49] coeStFricLbl.Label
=
=

# [50] coeStFricLbl.HelpText
Coefficient of static friction
静摩擦系数

# [51] coeDynFricLbl.Label
=
=

# [52] coeDynFricLbl.HelpText
Coefficient of kinetic friction
动摩擦系数

# [53] coeStFricInput.Value
0.0
0.0

# [54] coeDynFricInput.Value
0.0
0.0

# [55] enableFrictionChkBtn.Label
Enable Friction
启用摩擦

# [56] enableFrictionChkBtn.HelpText
Enable friction between cams
启用凸轮间的摩擦

# [57] OkButton.Label
OK
确定

# [58] CancelButton.Label
Cancel
取消