setup_refs.mnu

来自「proe5.0野火版下载(中文版免费下载)」· MNU 代码 · 共 256 行

SEQ#SETUP

# remove the # sign and enter foreign help string in this line
Operation
Check to specify or modify the NC Sequence's operation.
# remove the # sign and enter foreign help string in this line
Fixture
Check to specify or modify the NC Sequence's fixture setup.
# remove the # sign and enter foreign help string in this line
Name
Check to specify an NC Sequence name.
# remove the # sign and enter foreign help string in this line
Comments
Check to specify NC Sequence Comments
# remove the # sign and enter foreign help string in this line
Prev#Tool
Check to specify or modify the previous tool.
# remove the # sign and enter foreign help string in this line
Tool
Check to specify or modify the tool.
# remove the # sign and enter foreign help string in this line
Attachment
Check to specify or modify the attachment.
# remove the # sign and enter foreign help string in this line
Cycle#Type
Check to specify cycle type for this NC Sequence.
# remove the # sign and enter foreign help string in this line
Parameters
Check to specify parameters for this NC Sequence.
# remove the # sign and enter foreign help string in this line
Process#Refs
Check to specify general references for this machining step.
# remove the # sign and enter foreign help string in this line
Ref#Csys
Specify reference coordinate system for this step.
#
Coord#Sys
Check to specify the coordinate system.
# remove the # sign and enter foreign help string in this line
Retract#Surf
Check to specify the retract plane.
# remove the # sign and enter foreign help string in this line
Retract
Check to specify the retract plane.
# remove the # sign and enter foreign help string in this line
Volume
Check to specify the mill volume for the NC Sequence.
# remove the # sign and enter foreign help string in this line
Surfaces
Check to specify surfaces to machine.
# remove the # sign and enter foreign help string in this line
Machining#Surfaces
Specify surfaces to machine
# remove the # sign and enter foreign help string in this line
Mach#Geom
Geometry references for machining.
# remove the # sign and enter foreign help string in this line
Machine#Geom
Geometry references for machining.
# remove the # sign and enter foreign help string in this line
Datum#Curve
Check to select a datum curve to machine.
# remove the # sign and enter foreign help string in this line
Curve
Check to select datum curves to machine.
# remove the # sign and enter foreign help string in this line
Mill#Geometry
Check to specify approximate surfaces to machine.
# remove the # sign and enter foreign help string in this line
Window
Check to specify the mill window for the NC Sequence.
# remove the # sign and enter foreign help string in this line
Surface#Side
Check to specify surface side to machine.
# remove the # sign and enter foreign help string in this line
Close#Loops
Check to specify loops to close for Window Machining.
# remove the # sign and enter foreign help string in this line
4#Axis#Plane
Check to specify projection plane for 4-axis machining.
# remove the # sign and enter foreign help string in this line
ScallopSrf
Check to specify surfaces to exclude from scallop computation.
# remove the # sign and enter foreign help string in this line
Bndry#Contrs
Check to specify contours for projected tool path.
# remove the # sign and enter foreign help string in this line
Start#Height
Check to specify plane or surface for tool tip to start at.
# remove the # sign and enter foreign help string in this line 
Height
Check to specify plane or surface for tool tip to follow.
# remove the # sign and enter foreign help string in this line
Check#Surfs
Check to specify surfaces to check gouging against.
# remove the # sign and enter foreign help string in this line
Check#Srfs
Check to specify surfaces to check gouging against.
# remove the # sign and enter foreign help string in this line
MachineSrfs
Check to specify surfaces to machine from leftover quilt.
# remove the # sign and enter foreign help string in this line
MachiningArea
Check to preview surfaces to machine from leftover quilt.
# remove the # sign and enter foreign help string in this line
Cutline#Srfs
Check to specify surfaces for cutline definition.
# remove the # sign and enter foreign help string in this line
Excld#Surfs
Check to specify volume surfaces to exclude from profiling.
# remove the # sign and enter foreign help string in this line
Top#Surfaces
Check to specify top surfaces for volume.
# remove the # sign and enter foreign help string in this line
Appr#Walls
Check to specify volume surfaces to approach or exit through
# remove the # sign and enter foreign help string in this line
Thread#Cyl
Check to specify thread milling surface.
# remove the # sign and enter foreign help string in this line
Start#Point
Check to specify milling start point.
# remove the # sign and enter foreign help string in this line
Cutline#Def
Check to specify cutlines.
# remove the # sign and enter foreign help string in this line
Define#Cut
Check to specify cut.
# remove the # sign and enter foreign help string in this line
StartCutLine
Check to specify the start cut line.
# remove the # sign and enter foreign help string in this line
EndCutLine
Check to specify the end cut line.
# remove the # sign and enter foreign help string in this line
InnerCutLine
Check to specify inner cut lines
# remove the # sign and enter foreign help string in this line
Synchronize
Check if you want to specify synchpoints.
# remove the # sign and enter foreign help string in this line
Direction
Check to specify direction of cut.
# remove the # sign and enter foreign help string in this line
Order
Check to order surfaces or cut lines for contouring.
# remove the # sign and enter foreign help string in this line
Axis#Def
Check to define axis vectors for tool axis control.
# remove the # sign and enter foreign help string in this line
Groove#Feat
Check to select the reference groove features.
# remove the # sign and enter foreign help string in this line
Edges
Select edges to drive tool along.
# remove the # sign and enter foreign help string in this line
Offset
Select offset from edge: left, right, or none.
# remove the # sign and enter foreign help string in this line
Matrl#Side
Check to define on which side is tool with respect to material.
# remove the # sign and enter foreign help string in this line
Norm#Surf
Select normal surface.
# remove the # sign and enter foreign help string in this line
Ref#Sequence
Check to select the reference Volume, Profile or Local Mill NC Sequence.
# remove the # sign and enter foreign help string in this line
Mirror#Plane
Check to specify mirror plane for the NC sequence.
# remove the # sign and enter foreign help string in this line
Mirror#Option
Check if you want to reverse cutting conditions after mirroring.
# remove the # sign and enter foreign help string in this line
Corner#Edges
Check to specify corners for local milling.
# remove the # sign and enter foreign help string in this line
Stock#Bound
Check to specify the stock boundary for turning.
# remove the # sign and enter foreign help string in this line
Area
Check to specify the area to be machined.
# remove the # sign and enter foreign help string in this line
Trajectory
Check to specify the tool's trajectory.
# remove the # sign and enter foreign help string in this line
Turn#Profile
Check to specify turning profile curves.
# remove the # sign and enter foreign help string in this line
Ends
Check to adjust cut ends.
# remove the # sign and enter foreign help string in this line
Corners
Check to specify corner conditions.
# remove the # sign and enter foreign help string in this line
Stock#Allow
Specify stock allowance on turn profile.
# remove the # sign and enter foreign help string in this line
Thread
Check to specify thread references.
# remove the # sign and enter foreign help string in this line
Holes
Check to select holes for the holemaking sequence.
# remove the # sign and enter foreign help string in this line
Tool#Motions
Check to specify tool motions.
# remove the # sign and enter foreign help string in this line
End#Plane
Check to specify thread milling end plane.
# remove the # sign and enter foreign help string in this line
XY#Plane
Check to specify bottom plane for Head 2 output.
# remove the # sign and enter foreign help string in this line
UV#Plane
Check to specify upper plane for Head 1 output.
# remove the # sign and enter foreign help string in this line
Start#Axes
Check to specify pre-drilled axes.
# remove the # sign and enter foreign help string in this line
Build#Cut
Check to specify build cut elements (approach, exit, ...).
# remove the # sign and enter foreign help string in this line
Approach#Axis
Select#Axis#for#Tool#Approach
# remove the # sign and enter foreign help string in this line
Exit#Axis
Select#Axis#for#Tool#Exit
# remove the # sign and enter foreign help string in this line
Approach/Exit
Check to specify approach/exit strategies.
# remove the # sign and enter foreign help string in this line
Start
Check to specify NC Sequence start point.
# remove the # sign and enter foreign help string in this line
End
Check to specify NC Sequence end point.
# remove the # sign and enter foreign help string in this line
Sync#HEAD1
Check if you want to synchronize CL Data output with HEAD1.
# remove the # sign and enter foreign help string in this line
Simplfd#Rep
Select or create the simplified rep to be used when displaying this sequence.
# remove the # sign and enter foreign help string in this line
View
Select or create the named view to be used when displaying this sequence.
#
Time#Estimate
Specify estimated time to perform this NC sequence.
#
Cost#Estimate
Specify estimated cost to perform this NC sequence.
#
Merged#Refs
Check to select references to holemaking sequences.
# remove the # sign and enter foreign help string in this line