cut_along.mnu

proe5.0野火版下载(中文版免费下载)

CUT#ALONG

# remove the # sign and enter foreign help string in this line
Thread#Point
Check to define starting location of toolpath
# remove the # sign and enter foreign help string in this line
Approach#Point
Check to define approach location of toolpath
# remove the # sign and enter foreign help string in this line
Sketch
Check to define the sketch for the sketched Cut Motion.
# remove the # sign and enter foreign help string in this line
Edge
Check to select edges to machine.
# remove the # sign and enter foreign help string in this line
Curve
Check to select datum curves to machine.
# remove the # sign and enter foreign help string in this line
Surface
Check to select surfaces for the tool side to follow. 
# remove the # sign and enter foreign help string in this line
Edges
Check to select surface contours to machine.
# remove the # sign and enter foreign help string in this line
Contour1
Check to specify first contour of two contour milling.
# remove the # sign and enter foreign help string in this line
Contour2
Check to specify second contour of two contour milling.
# remove the # sign and enter foreign help string in this line
Side#Surfs
Check to specify contours by selecting side surfaces.
# remove the # sign and enter foreign help string in this line
Synch
Check to specify synch points.
# remove the # sign and enter foreign help string in this line
Direction
Check to define direction of cut.
# remove the # sign and enter foreign help string in this line
Offset
Check to define direction to offset cut motion.
# remove the # sign and enter foreign help string in this line
Control#Srf
Check to define axis control surface.
# remove the # sign and enter foreign help string in this line
Axis#Def
Check to define axis definition.
# remove the # sign and enter foreign help string in this line
Start#Height
Check to specify plane or surface for tool tip to start at.
# remove the # sign and enter foreign help string in this line
Height
Check to specify plane or surface for tool tip to follow.
# remove the # sign and enter foreign help string in this line 
Matrl#Side
Check to define on which side is tool with respect to material.
# remove the # sign and enter foreign help string in this line
Ref#Cut#Mtn
Check to specify reference cut motion
# remove the # sign and enter foreign help string in this line
Mirror#Plane
Check to specify mirror plane of cut motion.
# remove the # sign and enter foreign help string in this line