int_cut.mnu

来自「proe5.0野火版下载(中文版免费下载)」· MNU 代码 · 共 43 行

INT#CUT

# remove the # sign and enter foreign help string in this line
Cut
Specify the reference geometry to define the cut.
# remove the # sign and enter foreign help string in this line
Stock#Bound
Specify the stock boundary
# remove the # sign and enter foreign help string in this line
Turn#Profile
Specify the reference geometry to define the cut.
# remove the # sign and enter foreign help string in this line
On/Offset
Specify if the tool path should be created on turn profile
# remove the # sign and enter foreign help string in this line
Ends
Adjust the start and end points of the Cut Motion.
# remove the # sign and enter foreign help string in this line
Extensions
Specify the cut extension
# remove the # sign and enter foreign help string in this line
Corners
Apply corner conditions to the Cut Motion.
# remove the # sign and enter foreign help string in this line
Stock#Allow
Specify stock allowance on turn profile.
# remove the # sign and enter foreign help string in this line
Taper#Angle
Specify the locations for the taper angle to begin and end.
# remove the # sign and enter foreign help string in this line
Shakeaway
Specify the shakeaway tabs.
# remove the # sign and enter foreign help string in this line
Parameters
Set parameters for this cut motion.
# remove the # sign and enter foreign help string in this line
Check#Surfs
Specify check surfaces for additional gouge avoidance.
# remove the # sign and enter foreign help string in this line
Build#Cut
Specify approach and exit motions for this cut.
# remove the # sign and enter foreign help string in this line