cutmotion_setup.mnu

来自「proe5.0野火版下载(中文版免费下载)」· MNU 代码 · 共 68 行

CUTMOTION#SETUP

# remove the # sign and enter foreign help string in this line
Parameters
Set parameters for this cut motion.
# remove the # sign and enter foreign help string in this line
Stock#Bound
Check to specify the stock boundary for turning.
# remove the # sign and enter foreign help string in this line
Turn#Profile
Check to specify turning profile curves.
# remove the # sign and enter foreign help string in this line
Drive#Surfaces
Check to specify surfaces to machine.
# remove the # sign and enter foreign help string in this line
From/To#Control
Select edges to form the trajectory for machining.
# remove the # sign and enter foreign help string in this line
Curve
Check to select curves or edges to machine.
# remove the # sign and enter foreign help string in this line
Datum#Curve
Check to select a datum curve to machine.
# remove the # sign and enter foreign help string in this line
Contour1
Check to specify first contour of two contour milling.
# remove the # sign and enter foreign help string in this line
Contour2
Check to specify second contour of two contour milling.
# remove the # sign and enter foreign help string in this line
Side#Surfs
Check to specify contours by selecting side surfaces.
# remove the # sign and enter foreign help string in this line
Synch
Check to specify synch points.
# remove the # sign and enter foreign help string in this line
Height
Check to specify plane or surface for tool tip to follow.
# remove the # sign and enter foreign help string in this line
Start#Height
Check to specify plane or surface for tool tip to start at.
# remove the # sign and enter foreign help string in this line
Direction
Check to define direction of cut.
# remove the # sign and enter foreign help string in this line
Check#Surfs
Specify check surfaces for additional gouge avoidance.
# remove the # sign and enter foreign help string in this line
Axis#Control
Check to specify axis
# remove the # sign and enter foreign help string in this line
Corners
Apply corner conditions to the Cut Motion.
# remove the # sign and enter foreign help string in this line
Offset
Check to define direction to offset cut motion.
# remove the # sign and enter foreign help string in this line
Matrl#Side
Check to define on which side is tool with respect to material.
# remove the # sign and enter foreign help string in this line
Build#Cut
Specify approach and exit motions for this cut.
# remove the # sign and enter foreign help string in this line
Ends
Adjust the start and end points of the Cut Motion.
# remove the # sign and enter foreign help string in this line