msgtxt_ger.txt

来自「proe5.0野火版下载(中文版免费下载)」· 文本 代码 · 共 2,434 行 · 第 1/5 页

%CPGER_SUGG_FIX_DIR
Move the component to the working directory or set a correct search patch.


%CPGER_SUGG_FIX_EDGE2
2. You may want to consider deleting a portion of that geometry and\nrecreating it.


%CPGER_SUGG_FIX_EDGE_DELETE
  3. Consider deleting a portion of that geometry and recreating it.


%CPGER_SUGG_FIX_EDGE_ZIP
  2. Redefine the surface boundaries so that there are no small edges; or


%CPGER_SUGG_FIX_QUILT
\n    Use "Info, Srf Analysis, Offset Mesh" to investigate the surfaces.\n    Redefine the offset/thickness value to be smaller, or redefine the surfaces \n    to be offset.


%CPGER_SUGG_FROM_UNTIL_SRF
     Redefine the "From" side of the feature to be "Thru Until"\n     the red surface.


%CPGER_SUGG_GATH_FAILFT_INFO
Gather information about the failed feature and reason for failure.


%CPGER_SUGG_GEN_FIX_BND_SUGGEST
  1. Manually repair the surface geometry through the Edit Boundary Functions.


%CPGER_SUGG_INCR_ACCURACY
This feature is defined with dimensions that are very small compared\nto the rest of the part.  You may want to change the part accuracy.


%CPGER_SUGG_INTF_1SIDED_EDGES
\n    Check them in the sending system.


%CPGER_SUGG_INTF_NOTUSABLE
\n    Analysis tools may help to indicate the problem(s). It is\n    recommended to delete (or isolate) these edges and surfaces\n    before creating subsequent features.


%CIGER_SUGG_INTS_MULT_ENT_VERTS
        Intersection of multi entity vertices.


%CPGER_SUGG_INVS_LC_INF_SR_FG
   #INVESIGATE, #LIST CHANGES/#INFO/#SHOW REFS/#FAILED GEOM


%CPGER_SUGG_INV_FAILED_GEOM
   #INVESIGATE, #FAILED GEOM


%CPGER_SUGG_IS_DEPTH_APP
Is the depth option appropriate? Try "Blind".


%CPGER_SUGG_IS_RAD_LARGE
Is the radius too large because of a modification or relation?


%CPGER_SUGG_IS_SEC_DIM_INAPP
Are any dimensions of the section inappropriate because of modification\n or relations?


%CPGER_SUGG_KILL_ENT_W_DEPENDENTS
Please redefine the section or modify the dimension


%CPGER_SUGG_MAKE_PATCHES
    Make a quilt from good surfaces, offset the quilt,\nmake patches over missing surfaces.


%CPGER_SUGG_MODIFY_SEC_OR_TRAJ
\n     Consider modifying the sections or try changing the trajectories.


%CPGER_SUGG_MODIFY_SPBK_ANGLE
Consider modifying the angle used in the spring back.


%CPGER_SUGG_MOD_ANG_BETN_SEC
Modify the angle between the sections.


%CPGER_SUGG_MOD_DIMS_OF_SEC
Modify dimensions of the section.


%CPGER_SUGG_MOD_DIMS_REL
Modify the dimensions or edit the relations that cause the intersection.


%CPGER_SUGG_MOD_DIM_OR_EDIT_REL
Modify the dimension or edit appropriate relation.


%CPGER_SUGG_MOD_DOME_RADIUS
Modify the dome radius.


%CPGER_SUGG_MOD_RDF_TRAJ_OR_SEC
Modify or Redefine the trajectory or section.


%CPGER_SUGG_MOD_RELIEF
Modify bend relief.


%CPGER_SUGG_MOD_RND_RAD
Modify the radius of the fillet/round or edit the appropriate relation.


%CPGER_SUGG_MOD_SHELL_THICK
Modify the shell thickness.


%CPGER_SUGG_MOD_THICK_OR_CRV_RAD
Modify the thickness or radius of curvature.


%CPGER_SUGG_MOD_XSEC
Modify the cross-section.


%CPGER_SUGG_MOD_XTND_DIST
Modify the extension distance.


%CPGER_SUGG_M_COMP_MISS_MDL
Terminate the retrieval with #QUICK FIX, #QUIT RETR


%CPGER_SUGG_M_FIXM_BM_MOD
   #FIX MODEL, #BACKUP MODL, #MODIFY


%CPGER_SUGG_M_FIXM_BM_REL
   #FIX MODEL, #RELATIONS


%CPGER_SUGG_M_FIXM_EDIT_REL
   #FIX MODEL, #RELATIONS, #EDIT REL


%CPGER_SUGG_M_FIXM_FAILFT_INF
   Failed Feature Info


%CPGER_SUGG_M_FIXM_XSEC_MOD
   #FIX MODEL, #X-SECTION, #MODIFY


%CPGER_SUGG_M_INV_LIST_CHG
   #INVESTIGATE, #LIST CHANGES


%CPGER_SUGG_M_INV_SREF
   #INVESTIGATE, #SHOW REF


%CPGER_SUGG_M_QFIX_REDEF
   #QUICK FIX, #REDEFINE


%CPGER_SUGG_M_QFIX_REDEF_PAT_OPTS
   #QUICK FIX, #REDEFINE, #PATTERN, #PAT OPTIONS


%CPGER_SUGG_M_QFIX_REDEF_RRT
   #QUICK FIX, #REDEFINE/#REROUTE


%CPGER_SUGG_NOT_OUTSIDE
     Modify dimensions so that the feature is no longer outside the part.


%CPGER_SUGG_NOT_TANGENT
    Relieve tangency conditions or redefine the curve.


%CPGER_SUGG_NO_SELF_INT
     Redefine the feature so that the surfaces are no longer\n     self-intersecting.


%CPGER_SUGG_OPEN_END_ALIGN
Are open ends aligned to appropriate surfaces


%CPGER_SUGG_PATCH_QUILT
\n    Create surfaces to patch holes in the offset quilt.


%CPGER_SUGG_RDF_PAT_GEN
Redefine the pattern to General.


%CPGER_SUGG_RDF_RRT_DEP_PLC_REF
Redefine or reroute the references for depth or placement plane.


%CPGER_SUGG_RDF_RRT_FT_REFS
Redefine or reroute the feature references.


%CPGER_SUGG_RDF_RRT_SEC_REFS_AVOID_OLAP
Reroute or Redefine section references to avoid entity overlap.


%CIGER_SUGG_RECOMMENDS
\nRecommended actions:


%CPGER_SUGG_REDEF_ANGL_OR_SRFS
Redefine draft angles or draft surfaces to resolve this conflict.


%CPGER_SUGG_REDEF_SRF
     Redefine the surfaces so that there are no small edges.


%CPGER_SUGG_REDUCE_RAD
     Reduce the round radius so the edge can be rounded.


%CPGER_SUGG_RED_FEAT_REFS
Redefine the feature references.


%CPGER_SUGG_REF_AND_FEAT_MISSING
Please reroute the reference or redefine the section.


%CPGER_SUGG_REF_AND_PART_MISSING
Please redefine section or bring referenced part back into assembly.


%CPGER_SUGG_REF_FOR_ENT_MISSING
Please modify earlier features, reroute the reference or redefine section.


%CPGER_SUGG_REF_INTF_GUIDE
Please refer to the section in the manual on creating solids from imported\nsurfaces for more detailed discussion of options.


%CPGER_SUGG_REJECT_IN_FIX_DHDR
\n%0d. Reject the requested changes, unselect the highlighted chain of edges,\n  continue performing Fix Tangency on the remaining selected edges; or


%CPGER_SUGG_REJECT_IN_FIX_GAP
\n%0d. Reject the requested changes, unselect the "Join Surfs" Attribute, select\n  a longer set of chains on both sides of the indicated points and perform\n  Zip Gaps, and reselect the "Join Surfs" Attribute; and/or


%CPGER_SUGG_RND_FULL_PIECE_OVERLAP
     Modify existing part geometry to either decrease the Full Round radius \nby moving its references closer together, or remove sharp turns that the \nFull Round encounters.


%CPGER_SUGG_RND_RELATION
     Define a relation such that the proper round radius is\n     automatically maintained.


%CPGER_SUGG_RND_TRANS_REF_FAIL_CNG
     Redefine the TRANSITIONS element for the failed feature, and select the \nTransitions indicated above for redefinition. Reselect lost references.


%CPGER_SUGG_RND_TRANS_REF_FAIL_RMV
     Redefine the TRANSITIONS element for the failed feature, and remove the \ntransitions which no longer have valid references.


%CPGER_SUGG_RND_TRANS_S0
Redefine the Attach Type to "Make Surface" and complete it using quilts.


%CPGER_SUGG_RND_TRANS_S1
Redefine the Round Type to "Advanced" and add transitions at these points.


%CPGER_SUGG_RND_TRANS_S2
Add transitions at these points.


%CPGER_SUGG_RND_TRANS_S3
Redefine or remove these transitions.


%CPGER_SUGG_ROUND_ONCE
     Redefine one of these features so that the edge is only rounded once.


%CPGER_SUGG_ROUND_THRU_VERTEX
     Redefine the round so that it passes through the highlighted vertex.


%CWGER_SUGG_SEC_APPRX_OF_GEOM
        Section is not exact, but an approximation of underlying geometry.


%CPGER_SUGG_SEC_OPEN_CLOSE
Should the section be Closed or Open?


%CPGER_SUGG_SFILLET_SET_OVERLAP_JUN
   Please redefine round feature.


%CPGER_SUGG_SFILLET_SPLINE_NEG
Specify additional radius values or redefine the radius values at\nthe highlighted points such that the interpolated radius values no\nlonger become negative. 


%CPGER_SUGG_SHADOW_CONCAVE_PLANAR
     Redefine the adjacent surfaces so the edges become planar.


%CPGER_SUGG_SHADOW_RND_SHARP
     Create a fillet in this sharp corner.


%CPGER_SUGG_SHADOW_UNDERCUT
In order for the SHADOW feature to function correctly you may want to\ndraft those surfaces, or use slides.


%CPGER_SUGG_SHAD_REDUCE_SHUTOFF
     Decrease the specified shutoff distance.


%CPGER_SUGG_SKET_TANGENCY_ACQUIRED
If dimensions were modified, please restore all modified values or delete extra dimensions.


%CPGER_SUGG_SMALLER_RADIUS
\n     Consider smaller radius of fillet/round in this area.


%CPGER_SUGG_SMT_CONV_BAD_BEND
\n   Change the bend radius.


%CPGER_SUGG_SMT_CONV_BAD_EDGE
\n   Selected edge must lie between two green surfaces or between two white surfaces.\n   Please reselect.


%CPGER_SUGG_SMT_CONV_BAD_EXTEND
\n   Redefine overlap conditions.


%CPGER_SUGG_SMT_CONV_BAD_OFFSET
\n   Remove solid features affecting the edge and place them after conversion.


%CPGER_SUGG_SMT_CONV_BAD_RELIEF
\n   Change the radius of the bend adjacent to the relief.


%CPGER_SUGG_SMT_CONV_BAD_RIP
\n   Redefine the rip piece or adjacent pieces.


%CPGER_SUGG_SMT_CONV_BAD_VERTEX
\n   Redefine reliefs points. 


%CPGER_SUGG_SMT_CONV_INVALID_CONN
\n   Redefine the connection such that both ends of of it are in same surface.


%CIGER_SUGG_SMT_CONV_TWO_CNTR_CONN
\n   When you have a connection between different contours of same surface,\n   you need at least two connections to split the surface into three parts.


%CEGER_SUGG_SMT_CONV_UNDEF_PIECE
\n   All pieces of the edge must be defined as Bend or Rip.


%CPGER_SUGG_SPINE_CRV_BIG_REC
\n            Try to reduce the radius of the round for that point.


%CPGER_SUGG_SUPPRESS_GER
If this is the intended geometry, hide the error.


%CPGER_SUGG_TANGENT_ENTITIES
Redefine the input curves and make them nontangent.


%CPGER_SUGG_TO_GIVEN_DEPTH
     Change the depth of the feature to %0f.


%CPGER_SUGG_TO_UNTIL_SRF
     Redefine the "To" side of the feature to be "Thru Until"\n     the cyan surface.


%CPGER_SUGG_UNREF_EDGE
     Redefine the round feature so that it no longer references the edge.


%CPGER_SUGG_UNRESLVD_SING_SURFS
\nExclude or delete the surface and recreate the geometry.


%CPGER_SUGG_UPTO_EDGE
     Redefine the feature so that the section starts or stops at the\n     highlighted edge.


%CPGER_SUGG_UPTO_VERT
     Redefine the feature so that the section starts or stops at the\n     highlighted vertex.


%CPGER_SUGG_USE_MANUAL_EDQUILT
Use Fix Vertices or Edit Boundary.


%CPGER_SUGG_USE_REG_PROE_FUNC
Resolve problem by using regular functionality under #FIX MODEL and #QUICK FIX


%CPGER_SUGG_USE_SRFS
     Use Surface Features to complete the Parting Surface.


%CPGER_SUGG_USE_ZIP_GAP
  2. Use the Zip Gap functionality to join the surface into the quilt.\n


%CPGER_SUGG_WHICH_GEOM_OVERLAP
Which geoms are overlapping ?.


%CPGER_SUGG_WHICH_REFS_DET_DEPTH
Which references are used to determine the depth?


%CPGER_SUGG_WHICH_REFS_DET_REV_ANG
Which references are used to determine the revolve angle?


%CPGER_SUGG_WHICH_REFS_DONT_INT
Which references do not intersect?


%CPGER_SUGG_WHICH_REFS_MISS
Which references are missing?


%CPGER_SUGG_WHICH_REFS_NOT_INGEOM
Which references are not in geometry?


%CPGER_SUGG_WHICH_REFS_NO_CHAIN
Which references do not form a chain?


%CPGER_SUGG_WHICH_REF_INV
Which reference is invalid?


%CPGER_SUGG_WHICH_REF_MISS
Which reference is missing?


%CPGER_SUGG_WHICH_REF_NOT_TAN
Which references are not tangent?


%CPGER_SUGG_WHICH_XSEC_CRV_USES
Which cross-section is referenced by the curve?


%CPRESTORE ERR
RESTORE ERR


%CPThis Item has no references to highlight.  Use "Item Info" for information.
This item has no references to highlight.  Use "Item Info" for information.


%CPWARNING: Design intent is unclear in %0w.  Use "Info"/"Geom Check" in Part mode.
WARNING: Design intent is unclear in %0w.  Use "Info"/"Geom Check" in Part mode.


%CPWARNING: Design intent is unclear.  Use "Geom Check" menu for details.