msgtxt_ger.txt

来自「proe5.0野火版下载(中文版免费下载)」· 文本 代码 · 共 2,434 行 · 第 1/5 页

%CIFeat #%0d
Feat #%0d


%CLGEOM CHECK
GEOM CHECK


%CEGER_DIAG_ABORT_DRAFT_GEOM
Draft aborted. Geometry could not be constructed.


%CIGER_DIAG_ALSO_NO_FEAT_REF
The feature that originally created the edge has been deleted.


%CEGER_DIAG_APRX_CRV_NOT_TGT
References of approximate composite curve must be tangent.


%CEGER_DIAG_AUTO_ADJ_VOL_STOCK
    Can't automatically adjust volume for stock allowance.\n


%CWGER_DIAG_BAD_PARAM_SURF
The surface highlighted in red contains bad parameterization at the points\nhighlighted in green, creating a near singularity.


%CIGER_DIAG_BECOME_PARALLEL
Two intersecting lines become parallel


%CWGER_DIAG_BEND_RELIEF
Bad bend relief. 


%CWGER_DIAG_BLEND_COLLAPSE_SEC
\n     Highlighted blend surface has collapsing section(s).


%CEGER_DIAG_BROKEN_EDGE_CHAIN
The green points highlight sections of the edge containing gaps too large\nto fix using the current MaxGapDist.


%CEGER_DIAG_CABLE_TOO_CURVED
Minimum bend radius of cable is violated.


%CEGER_DIAG_CANT_BEND
Highlighted surfaces would overlap.


%CEGER_DIAG_CANT_CONNCT_FLT_SRF
Failed to connect fillet surfs. Highlighted almost tangent edge(s).


%CEGER_DIAG_CANT_FIX_CABLE_LEN
Can not to fix cable length.


%CEGER_DIAG_CANT_OFFSET
Highlighted surfaces are too curved to offset by specified value.


%CEGER_DIAG_CANT_OFFSET_QUILT
\n    Highlighted surfaces are too curved to offset by the specified value.\n    The rest of the quilt has been offset by disregarding the green surfaces.


%CEGER_DIAG_CHAMF_ABORT_GEOM
Chamfer aborted.  Geometry could not be constructed.


%CEGER_DIAG_CHAMF_EDGE_MISS_OR_INVALID
Chamfer aborted. Edge was unsuitable or missing.


%CEGER_DIAG_CHECK_ALL_LOOPS_CONT
All loops are not continuous.


%CEGER_DIAG_CHECK_ALL_SECS_CLOSED
Multiple loops must all be closed in this section.


%CEGER_DIAG_CHECK_CLOSED_SECTION
Section must be closed for this feature.


%CEGER_DIAG_CHECK_ENTS_PER_SUBSEC
Number of entities per section must be equal.


%CEGER_DIAG_CHECK_ENTS_SAME_SIDE
All entities must be on the same side of the revolving axis.


%CIGER_DIAG_CHECK_EXTRA_ENTS
Extra entities found in this section.


%CEGER_DIAG_CHECK_LINE_FOUND
Line is missing.


%CEGER_DIAG_CHECK_MIXED_SUBSECS
Cannot have mixture of open and closed sections.


%CPGER_DIAG_CHECK_MULTIPLE_SUBSECS
Must have more than one section. Select "Sec Tools", "Toggle" for next section.


%CEGER_DIAG_CHECK_NO_NULL_ENTS
Null entities are not allowed for this section.


%CEGER_DIAG_CHECK_NO_TEXT
Text entities are not allowed for this section.


%CEGER_DIAG_CHECK_NO_THIN_LETTERS
Thin letters not allowed for this section.


%CEGER_DIAG_CHECK_ONE_LOOP_EACH
Only one loop is allowed in each section.


%CEGER_DIAG_CHECK_ONE_LOOP_SUBSEC
Only one loop per subsection is allowed.


%CWGER_DIAG_CHECK_OPEN_ENDS_ALIGNED
WARNING: Not all open ends have been explicitly aligned.


%CEGER_DIAG_CHECK_OPEN_SECTION
Section must be open for this feature.


%CEGER_DIAG_CHECK_POINT_FOUND
Point entity is missing.


%CPGER_DIAG_CHECK_REVOL_AXIS
Axis of revolution is missing. Sketch a centerline.


%CEGER_DIAG_CHECK_SINGLE_OPEN_LOOP
Can not have more than one open loop.


%CEGER_DIAG_CHECK_SINGLE_SEC
Can not have more than one loop in this section.


%CEGER_DIAG_CHECK_START_NOT_NULL
Cannot have blend vertices at the start point of a closed loop.


%CWGER_DIAG_CHECK_VERTEX_END_ALIGN
WARNING: Vertex endpoint might not be aligned to both edges of the part.


%CEGER_DIAG_CHECK_XSEC_ENDS_TYPE
The ends for this feature must be straight lines.


%CIGER_DIAG_CNC_SURFS
The two highlighted surfaces are coincident for all or a portion of their\ngeometry, including the highlighted edge.


%CIGER_DIAG_CNTR_PTS_CROSSED
Highlighted control point sets intersect.


%CEGER_DIAG_COMP_MISSING_MDL
Component model is missing.


%CIGER_DIAG_CONVEX_CONCAVE
Highlighted surface(s) selected for removal has both inner and outer edges.


%CEGER_DIAG_CRV_MISSING_REFS
References of curve are missing or not present in geometry.


%CEGER_DIAG_CRV_NO_CHAIN
References of composite curve must form a chain.


%CEGER_DIAG_CRV_XSEC_NO_INT
Cross-section referenced by curve does not intersect model.


%CEGER_DIAG_CURVATURE
Bounding curve(s) are not C2 continuous to tangent surface at highlighted point(s).


%CWGER_DIAG_DIFF_THICK
Highlighted tangent surfaces are assigned different thickness.


%CEGER_DIAG_DOME_ABORT_GEOM
Dome aborted. Geometry could not be constructed.


%CEGER_DIAG_DOME_SMALL_RAD
Radius of dome is too small.


%CEGER_DIAG_DRAFT_ANG_DIR_UNSUITABLE
Draft angle & direction are unsuitable for draft surfaces.


%CIGER_DIAG_EDGE_HILITED
The edge is highlighted on screen.


%CIGER_DIAG_EDG_TO_CLOSE_LOOP
The highlighted edge has been automatically added to complete a closed loop for\nthe surface boundaries. This edge was originally missing from the import file.


%CIGER_DIAG_END_SRF_CLOSE_TO_EDG
The beginning or ending position of the section is very close to,\nbut not touching the highlighted edge.


%CIGER_DIAG_END_SRF_CLOSE_TO_VTX
The beginning or ending position of the section is very close to,\nbut not touching the highlighted vertex.


%CEGER_DIAG_EXTERNAL_REF_INVALID
Invalid external reference for the section entity is encountered.


%CEGER_DIAG_FEAT_ABORT_GEOM
Feature aborted.  Geometry Could not be constructed.


%CEGER_DIAG_FEAT_CANT_BE_PLACED
Feature aborted. Could not be placed.


%CEGER_DIAG_FEAT_DEPTH
Could not determine feature depth.


%CEGER_DIAG_FEAT_LARGE_ANG_BETN_SECS
Feature aborted. Angle between sections too large.


%CEGER_DIAG_FEAT_MISSING_REFS
Feature references are missing.


%CEGER_DIAG_FEAT_NO_REGEN_SEC_ON_TRAJ
Feature aborted. Cannot regen section at all points along the trajectory.


%CEGER_DIAG_FEAT_OVERLAP_GEOM
Feature aborted.  Geometry was overlapping.


%CEGER_DIAG_FLT_LARGE_RADIUS
Fillet/round radius is too large. Highlighted problem area.


%CEGER_DIAG_FRM_OR_BEND_RAD_OF_CRV
Radius of curvature of bend or form must be > thickness.


%CEGER_DIAG_FT_ABORT_SEC_ENT_OVERLAP
Feature aborted because section entities overlap.


%CEGER_DIAG_FT_ABOR_PART_NO_INTERS
Could not intersect part with feature.


%CEGER_DIAG_FT_CRV_OF_TRJENT_LRG_FOR_XSEC
Feature aborted. Curvature of trajectory entity is too great for the X-section.


%CEGER_DIAG_GEN_FIX_BND_PROBLEM
The highlighted geometry contains discontinuities or other problems which are\nso great the Fix Boundaries functionality cannot automatically repair them.


%CEGER_DIAG_GERR_TYPE_BLEND
Blend surfaces cannot be made between the highlighted pairs of edges.


%CEGER_DIAG_GERR_TYPE_CORNER_SPHERE
Corner blends cannot be made between the highlighted sets of edges.


%CEGER_DIAG_GERR_TYPE_CORNER_SWEEP
Corner sweeps cannot be made between the highlighted sets of edges.


%CEGER_DIAG_GERR_TYPE_INTERSECT
The highlighted pairs of surfaces cannot be intersected.


%CEGER_DIAG_GERR_TYPE_PATCH
Patches cannot be made between the highlighted sets of edges.


%CEGER_DIAG_INCMPAT_SRF_ORIET
Incompatible surface orientation prevents highlighted surfaces/edges\nfrom joining correctly.


%CEGER_DIAG_INTERNAL_REF_MISSING
Could not find internal reference for the section entity.


%CIGER_DIAG_INTF_1SIDED_EDGES
\n    Highlighted edges are 1-sided in the imported file.


%CWGER_DIAG_INTF_NOTUSABLE
\n    Highlighted edge(s) and surface(s) may cause failures in\n    subsequent features.


%CPGER_DIAG_INVALID_VAR_DIM
The varying dimension you selected is invalid. Please unregenerate and redefine perimeter.


%CEGER_DIAG_INVLD_BASE_PLN
Feature aborted. Invalid base plane.


%CIGER_DIAG_KILL_ENT_W_DEPENDENTS
The section depends on an entity which disappears due to large offset dimension


%CIGER_DIAG_LARGE_TRIM
A previously existing edge was almost completely trimmed away,\ncreating a tiny edge.


%CEGER_DIAG_LCL_PUSH_MISSING_FACE
Local push aborted. Face was missing.


%CEGER_DIAG_LPUSH_ABORT
Local push aborted. Geometry could not be constructed.


%CWGER_DIAG_LV_SMALL_HILITE_EDGE
The import geometry contains small edge(s) and imprecise vertices.\nThese small edges may cause inaccuracies and problems with later features.


%CIGER_DIAG_MISALIGNMENT_IN_FILLET
This feature cuts (leaves) tiny piece(s) from an existing edge(s).


%CIGER_DIAG_MISALIGNS
Accepting the requested changes in the highlighted edges can lead to\nmisalignment near the indicated points.


%CWGER_DIAG_MISCHANCE_VERT
Highlighted vertices may cause problems in later features.


%CIGER_DIAG_NEW_ENT_INSERTED
INFO:  New entities were inserted into the section during regeneration


%CPGER_DIAG_NOT_RETR_PLACEMENT
Placement for feature not retrieved, regenerate it in parent assembly.


%CEGER_DIAG_NOT_TANGENT
Bounding curve(s) are not tangent to tangent surface at highlighted point(s).


%CEGER_DIAG_NO_CURVE
Curve could not be constructed.


%CEGER_DIAG_NO_PART_X_FEAT
The system could not construct the intersection of the part and feature.


%CIGER_DIAG_OVERLAP_GEOM
This feature contains self-intersecting surfaces.  The highlighted\nsurface has overlapping geometry.


%CEGER_DIAG_PERIMETER_CANT_SOLVE
The section cannot be regenerated with specified perimeter.


%CEGER_DIAG_PLA_REFS_MISS_OR_INVALID
Feature aborted. Placement references are missing or invalid.


%CEGER_DIAG_POINTS_COINCIDE
Highlighted points became coincident.


%CEGER_DIAG_POOR_ARC_TAN_LINE
Improper configuration of the arc center(s) and the tangent line.


%CWGER_DIAG_QLT_RMVD_ALL_AREA0_SRF
 The surface geometry being created is extremely small compared to the overall\n size of the model.  To  prevent  future  geometry  problems from such a small\n surface, a portion of the surface quilt has not been created.


%CWGER_DIAG_REFS_NOT_IN_GEOM
Some references are no longer present in geometry.


%CWGER_DIAG_REF_AND_FEAT_MISSING
Reference and its parent feature for the section entity no longer exist.


%CEGER_DIAG_REF_AND_PART_MISSING
Reference part for the section entity is unavailable.


%CWGER_DIAG_REF_FOR_ENT_MISSING
Reference for the section entity no longer exists.


%CEGER_DIAG_REV_ANGLE
Could not determine feature revolve angle.


%CIGER_DIAG_RMVD_SMALL_EDGE
This feature removes small highlighted edge(s) and creates imprecise vertices.


%CEGER_DIAG_RND_EDG_ALREADY
This feature references an edge (No. %0d) that was already rounded\nby another feature.  Feature No. %1d, ID %2d was redefined so\nthat it rounded this edge.


%CIGER_DIAG_RND_EDG_NOT_EXIST
This feature references an edge (No. %0d) that, due to modification\nof the part, was not created during last regeneration.


%CWGER_DIAG_RND_EDG_REMOVED
This feature references an edge (No. %0d) that is not present\nin the geometry. An intervening feature was modified\nso that it removed the edge.


%CEGER_DIAG_RND_LARGE_RAD
The given radius is too large to round edge No. %0d.


%CEGER_DIAG_RND_LARGE_RAD1_TO_RAD2_RATIO
Ratio of radius one to radius two is too large.


%CEGER_DIAG_RND_LARGE_RAD2_TO_RAD1_RATIO
Ratio of radius two to radius one is too large.


%CEGER_DIAG_RND_TRANS_REF_FAIL
Recent changes have caused user-defined  transition references to be lost.


%CEGER_DIAG_SEGMENT_TOO_SMALL
Highlighted segment is too small.


%CEGER_DIAG_SFILLET_CANT_MATCH
Round cannot match a segment constructed on highlighted pair of surfaces\nto the previous segment (highlighted in green).


%CEGER_DIAG_SFILLET_OVERLAP
The highlighted surface has overlapping geometry.


%CEGER_DIAG_SFILLET_SET_OVERLAP_JUN
Round geometry is overlapping in the highlighted areas.


%CIGER_DIAG_SFILLET_SPLINE_NEG
User defined radius values cause the interpolated radius values between the\nhighlighted points to become negative.  The radius values at these two points\nare rad1 = %0g and rad2 = %1g.


%CEGER_DIAG_SHADOW_CANT_CAP
Can not cap highlighted loop(s).


%CEGER_DIAG_SHADOW_CANT_FILL
Can not fill highlighted loop(s).