msgtxt_g03.txt

来自「proe5.0野火版下载(中文版免费下载)」· 文本 代码 · 共 3,413 行 · 第 1/4 页

%CP Enter depth [%0f] : 
 Enter depth|||%0f


%CP Specify accuracy of composite curve with respect to curve references.
 Specify accuracy of composite curve with respect to curve references.


%CIDatum CrossHatch
Closed sections of the datum curve will be cross hatched


%CIDatum No CrossHatch
Closed sections of the datum curve will NOT be cross hatched


%CPSelect datum plane.
Select datum plane.


%CPSpecify surfaces or datum plane.
Specify surfaces or datum plane.


%CWConfirm removal of Surface references.
Confirm removal of Surface references.


%CWConfirm removal of Datum Plane references.
Confirm removal of Datum Plane references.


%CEOld image file; not supported.
Old image file; not supported.


%CPSelect a reference to specify the projection direction.
Select a reference to specify the projection direction.


%CPSpecify type of curve to be projected.
Specify type of curve to be projected.


%CPSpecify the projection type.
Specify the projection type.


%CIAlong Dir
Along Dir


%CINorm to Surf
Norm to Surf


%CINorm to Sket
Norm to Sket


%CEThere is no DIRECT child for this feature. Select again.
There is no DIRECT child for this feature. Select again.


%CWLost option
Lost %0s license; corresponding modes are inaccessible.


%CWLost option warning
WARNING: Lost %0s license; quit from current mode immediately.


%CE Errors in user program compling or linking.
 Errors in user program compiling or linking.


%CE User program execution failed.
 User program execution failed.


%CEAll comp. curve components must be tangent, projected along pivot direction.
All comp. curve components must be tangent, projected along pivot direction.


%CEAll composite curve components must be tangent.
All composite curve components must be tangent.


%CEAnother group with the same name already exists.
Another group with the same name already exists.


%CEBitmaps are of unequal size; cannot continue.
Bitmaps are of unequal size; cannot continue.


%CEBoth points must be in the same table.
Both points must be in the same table.


%CECan NOT select table driven dimension.
Can NOT select table driven dimension.


%CECan not replace assembly datum.
Can not replace assembly datum.


%CECannot add curvature dimension to spline with control polygon.
Cannot add curvature dimension to spline with control polygon.


%CECannot change "on point" placement type.
Cannot change "on point" placement type.


%CECannot create auxiliary view of selected edge.
Cannot create auxiliary view of selected edge.


%CECannot declare items for an instance.
Cannot declare items for an instance.


%CECannot dimension aligned spline to coordinate system.
Cannot dimension aligned spline to coordinate system.


%CECannot dimension spline with control polygon to coordinate system.
Cannot dimension spline with control polygon to coordinate system.


%CECannot edit read_only draft groups.
Cannot edit read-only draft groups.


%CECannot explode read_only draft groups.
Cannot explode read-only draft groups.


%CECannot modify aligned spline.
Cannot modify aligned spline.


%CECannot open input file.
Cannot open input file.


%CECannot retrieve default surface finish symbol!
Cannot retrieve default surface finish symbol - deleting all surface finishes!


%CEColumns to merge must be similar vertically.
Columns to merge must be similar vertically.


%CECurrent object and bitmap object types do not match.
Current object and bitmap object types do not match.


%CEDatum points array can not be used to set targets.
Datum points array can not be used to set targets.


%CEDraft axes may not be erased.
Draft axes may not be erased.


%CEDraft datums may not be erased.
Draft datums may not be erased.


%CEDraft group creation aborted.
Draft group creation aborted.


%CEEntity belonging to a group cannot be modified.
Entity belonging to a group cannot be modified.


%CEError - Invalid directory specification.
Error - Invalid directory specification.


%CEError reading bitmap color info.
Error reading bitmap color info.


%CEError writing bitmap file. Bitmap may be incomplete.
Error writing bitmap file. Bitmap may be incomplete.


%CEFilled cross-sections cannot be modified.
Filled cross-sections cannot be modified.


%CEGTOLs may not be attached to reference dimensions.
GTOLs may not be attached to reference dimensions.


%CEGrouped entities cannot be chosen for creation of x-hatch.
Grouped entities cannot be chosen for creation of cross-hatch.


%CEHighlighted selection is invalid.
Highlighted selection is invalid.


%CEInsufficient system memory.
Insufficient system memory.


%CEModel replacement aborted.
Model replacement aborted.


%CENo draft angle break points created.
No draft angle break points created.


%CENo invalid geometry was found.
No invalid geometry was found.


%CENo such iges file.
Cannot find IGES file with that name.


%CENo trajectory created - Feature aborted
No trajectory created - Feature aborted.


%CENo views found
No views found.


%CEPart is marked as read only - modification is not allowed
Part is marked as read only - modification is not allowed.


%CEPartition option cancelled; only available with 'Fit Paper'.
Partition option cancelled; only available with "Fit Paper".


%CEPartition option cancelled; only available with 'Scale Model'.
Partition option cancelled; only available with "Scale Model".


%CERange option cancelled; not available with segmented plots.
Range option cancelled; not available with segmented plots.


%CERows to merge must be similar horizontally.
Rows to merge must be similar horizontally.


%CESelected group is already active.
Selected group is already active.


%CESelected group is already suppressed.
Selected group is already suppressed.


%CEThe first and the last entities must be tangent.
The first and the last entities must be tangent.


%CEThe selected symbol text can't be modified.
The selected symbol text can't be modified.


%CEThere are no text fonts defined for this drawing.
There are no text fonts defined for this drawing.


%CEThere is no room for the default text font.
There is no room for the default text font.


%CEThis functionality is not supported with GL graphics.
This functionality is not supported with GL graphics.


%CEUnable to modify spacing between text lines.
Unable to modify spacing between text lines.


%CEYou cannot edit suppressed groups.
You cannot edit suppressed groups.


%CEYou cannot explode suppressed groups.
You cannot explode suppressed groups.


%CEYou cannot mix draft and model edges.
You cannot mix draft and model edges.


%CEYou cannot reference a draft datum in a model gtol.
You cannot reference a draft datum in a model gtol.


%CEYou cannot switch the view of a draft, iges or space note.
You cannot switch the view of a draft, IGES or space note.


%CEfile was not found
File was not found.


%CIBitmaps are identical.
Bitmaps are identical.


%CIModel remains unchanged.
Model remains unchanged.


%CIPerforming fuzzy pixel comparison...
Performing fuzzy pixel comparison ...


%CIScanning...
Scanning ...


%CIthis feature belongs to the assembly
This feature belongs to the assembly.


%CPAt least one point has to be selected. Please reselect.
At least one point has to be selected. Please reselect.


%CPInvalid group to add to. Create group first.
Invalid group to add to. Create group first.


%CPLine font "%0w" exists. Enter new line font name [%1w]:
Line font "%0w" exists. Enter new line font name|||%1w


%CPPick entities created by an iges file.
Pick entities created by an IGES file.


%CPPlease confirm to ungroup feature.
Please confirm to ungroup feature.


%CPPlease regenerate this part in the assembly ...
Please regenerate this part in the assembly where feature was created.


%CPPlease select a second '2 Point' reference before placing the dimension.
Please select a second '2 Point' reference before placing the dimension.


%CPPlease select instance part upon which the feature ...
Please select the instance part upon which the feature was created.


%CPPlease select surfaces from reference model.
Please select surfaces from reference model.


%CPPlease specify at least two points for Spring Back angles.
Please specify at least two points for Spring Back angles.


%CPPlease specify points at both ends.
Please specify points at both ends.


%CPPlease specify pull direction and draft line first.
Please specify pull direction and draft line first.


%CPRead-only values cannot be selected for use in Family Table. Try again.
Read-only values cannot be selected for use in Family Table. Try again.


%CPSect. geometry has changed the topology. Can't modify.
Section geometry has changed topology and cannot be modified.


%CPSelect a coordinate system, or choose 'No csys'.
Select a coordinate system, or choose "No csys" from menu.


%CPSelect a drawing model by picking ON the model.
Select a drawing model by picking ON the model.


%CPSelect a member coordinate system from the menu.
Select a component coordinate system from the menu.


%CPSelect an assembly coordinate system from the menu.
Select an assembly coordinate system from the menu.


%CPSelect detail item(s) to translate.
Select detail item(s) to translate.


%CPSelect from the same view.
Select from the same view.


%CPSelect geometry to which surface finish is associated.
Select geometry to which surface finish is associated.


%CPSelect items belonging to the same part/member.
Select items belonging to the same part/member.


%CPSelect which axis the datum plane will be normal to.
Select which axis the datum plane will be normal to.


%CPSelected point is coincident with previous point.  Select again.
Selected point is coincident with previous point.  Select again.


%CPView origin has been cleared;
View origin has been cleared; select another view to modify.


%CPYou cannot switch the view of a datum target symbol; use show by view.
You cannot switch the view of a datum target symbol; use show by view.


%CPZero is not allowed, Please re-enter :
Zero is not allowed, Please re-enter: 


%CWDatum is missing. Drawing view normally
The datum is missing for this view. Drawing view normally.


%CWMake sure window is fully visible on screen.
Make sure window is fully visible on screen.


%CWModel not added to dwg.
The model could not be added to the drawing.


%CWMore than one datum plane for projection. 
More than one datum plane for projection. First one will be used. 


%CWReference missing - using previous trajectory
Reference missing - using previous trajectory.


%CWThese points do not lie on the same plane with the first point.
These points do not lie on the same plane with the first point.


%CWWARNING: composite curve components not exactly tangent.
WARNING: composite curve components not exactly tangent.


%CWWARNING: object name and picture name mismatch.
WARNING: Object name and picture name mismatch.


%CWWARNING: the first and the last entities not exactly tangent.
WARNING: the first and the last entities not exactly tangent.


%CWWARNING: z values have been reset to zero.
WARNING: z values have been reset to zero.


%CWWarning: All points must lie on the Neutral Curve.
WARNING: All points must lie on the Neutral Curve.


%CWWarning: Portion(s) of some surface(s) could not be rotated.
WARNING: Portion(s) of some surface(s) could not be rotated.


%CIChildren are highlited in reference color.
Children are highlighted in reference color.


%CECan not replace with the quilt, it is used by another feature.
Can not replace with the quilt, it is used by another feature.


%CEFeature aborted. RIB failed.
Feature aborted. RIB failed.


%CPSpecifiy whether  the replacement quilt should be kept after the tweak.
Specifiy whether  the replacement quilt should be kept after the tweak.


%CLTLBPart
Part


%CLTLBConcept Part
Concept Part


%CLTLBAssembly
Assembly


%CLTLBDrawing
Drawing


%CLTLBLayout
Layout


%CLTLBSketch
Sketch


%CLTLB3D Sec
3D Sec


%CLTLBSketcher
Sketcher


%CLTLBFormat
Format


%CLTLBInterchange (pre v.13)
Interchange (pre v.13)


%CLTLBProject
Project


%CLTLBOld Project
Old Project


%CLTLBManufacturing
Manufacturing


%CLTLBGroup
Group


%CLTLBUser Symbol
User Symbol


%CLTLBEco
Eco


%CLTLBTool
Tool


%CLTLBMachining
Machining


%CLTLBConf Param
Conf Param


%CLTLBProject Report
Project Report


%CLTLBReport
Report


%CLTLBXhatch Style
Xhatch Style


%CLTLBDXhatch Style
DXhatch Style


%CLTLBLight
Light


%CLTLBWorkflow
Workflow


%CLTLBSubform
Subform


%CLTLBIndex File
Index File


%CLTLBMarkup
Markup


%CLTLBSyscol
Syscol


%CLTLBDiagram
Diagram


%CLTLBDraft
Draft


%CLTLBMaterial
Material


%CLTLBSpool
Spool


%CLTLBTable Drawing
Table Drawing


%CLTLBTable Draft
Table Draft


%CLTLBPicture
Picture


%CLTLBNC Check
NC Check


%CLTLBIGES
IGES


%CLTLBECAD IDF
ECAD IDF


%CLTLBECAD VISULA
ECAD VISULA


%CLTLBECAD ALLEGRO
ECAD ALLEGRO


%CLTLBECAD DAZIX
ECAD DAZIX


%CLTLBECAD Lib IDF
ECAD Lib IDF


%CLTLBECAD Lib VISULA
ECAD Lib VISULA


%CLTLBECAD Lib ALLEGRO
ECAD Lib ALLEGRO


%CLTLBECAD Lib DAZIX
ECAD Lib DAZIX


%CLTLBECAD Pla ALLEGRO
ECAD Pla ALLEGRO


%CLTLBSET
SET


%CLTLBVDA
VDA


%CLTLBDXF
DXF


%CLTLBIdx
Idx


%CLTLBImage
Image


%CLTLBCable
Cable


%CLTLBConnector
Connector


%CLTLBPat Table
Pat Table


%CLTLBPcf
Pcf


%CLTLBLine Stock
Line Stock


%CLTLBDirectory
Directory


%CLTLBTool Param
Tool Param


%CLTLBNeutral
Neutral


%CLTLBCADAM
CADAM


%CLTLBPrint Table
Print Table


%CLTLBSite Table
Site Table


%CLTLBMill Table
Mill Table


%CLTLBConfigure File
Configure File


%CLTLBBaseline
Baseline


%CLTLBOld Mail
Old Mail


%CLTLBNew Mail
New Mail


%CLTLBDif Report
Dif Report


%CLTLBTerm Table
Term Table


%CLTLBCADAM Draft
CADAM Draft


%CLTLBLinestyle
Linestyle


%CLTLBIntegr Proj
Integr Proj


%CLTLBFPP FEI
FPP FEI


%CLTLBFPP FES
FPP FES


%CLTLBFPP FMR
FPP FMR


%CLTLBCMDSYN
CMDSYN


%CLTLBCL File
CL File


%CLTLBDrawing Setup
Drawing Setup


%CLTLBSnapshot
Snapshot


%CLTLBStrip Table
Strip Table


%CLTLBDiagram MVC Def
Diagram MVC Def


%CLTLBWelding Rod
Welding Rod


%CLTLBWelding Params
Welding Params


%CLTLBTool Path
Tool Path


%CLTLBSubharness
Subharness


%CLTLBBeam Cross Sect Prop
Beam Cross Sect Prop


%CLTLBInst Part
Inst Part