msgtxt_rer.txt

来自「proe5.0野火版下载(中文版免费下载)」· 文本 代码 · 共 97 行

%CECan not reroute read-only feature.
Can not reroute read-only feature.


%CECan not reroute this feature.
Can not reroute this feature.


%CEDatum surface aborted. Invalid control point found.
Datum surface aborted. Invalid control point found.


%CIFeature rerouted successfully.
Feature rerouted successfully.


%CEFeature-reroute aborted.
Feature-reroute aborted.


%CPSelect an alternate axis.
Select an alternate axis.


%CPSelect an alternate coordinate system.
Select an alternate coordinate system.


%CPSelect an alternate dimensioning reference.
Select an alternate dimensioning reference.


%CPSelect an alternate edge.
Select an alternate edge.


%CPSelect an alternate feature.
Select an alternate feature.


%CPSelect an alternate horizontal reference plane for sketcher.
Select an alternate horizontal reference plane for sketcher.


%CPSelect an alternate point.
Select an alternate point.


%CPSelect an alternate reference.
Select an alternate reference.


%CPSelect an alternate sketching plane.
Select an alternate sketching plane.


%CPSelect an alternate surface.
Select an alternate surface.


%CPSelect an alternate vertical reference plane for sketcher.
Select an alternate vertical reference plane for sketcher.


%CPSelect feature to reroute.
Select feature to reroute.


%CWWARNING: New reference is not coincident with the old one.
WARNING: New reference is not coincident with the old one.


%CWWARNING: Unable to check if new reference is coincident with the old one.
WARNING: Unable to check if new reference is coincident with the old one.


%CECan not reroute group pattern feature.
Can not reroute group pattern feature.


%CPSelect an alternate coordinate system from the external model.
Select an alternate coordinate system from the external model.


%CPSelect or create an alternate coordinate system for the local model.
Select or create an alternate coordinate system for the local model.


%CPSelect an alternate logical edge.
Select an alternate Chain of Edges.


%CPSelect an alternate logical surface.
Select an alternate Set of Surfaces.