msgtxt_ecd.txt

来自「proe5.0野火版下载(中文版免费下载)」· 文本 代码 · 共 725 行 · 第 1/2 页

%CE	 because its existing placement has dimensions driven by relations.
         because its existing placement has dimensions driven by relations.


%CE         Component aborted
         Component aborted


%CW         The component ignored.
         The component ignored.


%CW         the contour will be aborted
         the contour will be aborted


%CI         with placement name <%0w> were totally replaced at import.
         with placement name <%0w> were totally replaced at import.


%CI       feature number %0d (internal ID %1d)
       feature number %0d (internal ID %1d)


%CI<%0w> Coordinate system was used for the main part
<%0w> Coordinate system was used for the main part


%CI<%0w> coordinate system was used for the component <%1w>
<%0w> coordinate system was used for the component <%1w>


%CEA cut contour is too small or not a closed loop
A cut contour is too small or not a closed loop


%CPAccept New
Accept New


%CWArea includes unclosed contour  - ignored
Warning: area includes unclosed contour  - ignored


%CIBoard file version 2.0 has been detected
Board file version 2.0 has been detected


%CIBoard file version 3.0 has been detected
Board file version 3.0 has been detected


%CECannot find BOARD section
Cannot find BOARD section


%CECannot find DRILLED HOLE subsection
Cannot find DRILLED HOLE subsection


%CECannot find OTHER OUTLINE subsection.
Cannot find OTHER OUTLINE subsection.


%CECannot find OUTLINE subsection
Cannot find OUTLINE subsection


%CIComponent <%0w> (%1w) assembled
Component <%0w> (%1w) assembled


%CWContour ID = %0d is not inside outline. Will be removed.
WARNING: Contour ID = %0d is not inside outline . Removed .


%CICreating part %0w.
Creating part %0w.


%CECsys should be parallel to the board planes
Csys should be parallel to the board planes


%CWDelete Missing
Delete Missing


%CIECAD: %0d other outlines assembled
ECAD: %0d other outlines assembled


%CIECAD:Select or create a coord sys for the other outline %0w
ECAD:Select or create a coord sys for the other outline %0w


%CPEnter Neutral file name [%0w] :
Enter Neutral file name|||%0w


%CPEnter Profiles file name [%0w] :
Enter Profiles file name|||%0w


%CPEnter board THICKNESS (%0s) for the board <%1w> [%2f] :
Enter board THICKNESS (%0s) for the board <%1w>|||%2f


%CPEnter component HEIGHT (%0s) for the component <%1w> [%2f] :
Enter component HEIGHT (%0s) for the component <%1w>|||%2f


%CPEnter component name in the library [%0w] :
Enter component name in the library|||%0w


%CPEnter default file name [%0w] :
Enter file name|||%0w


%CPEnter footprint file name [%0w] :
Enter footprint file name|||%0w


%CPEnter library file name [%0w] :
Enter library file name|||%0w


%CPEnter other outline THICKNESS (%0s) for the other outline section <%1w> [%2f] :
Enter other outline THICKNESS (%0s) for the other outline section <%1w>|||%2f


%CPEnter outline file name [%0w] :
Enter outline file name|||%0w


%CPEnter placements file name [%0w] :
Enter placements file name|||%0w


%CEError in .OTHER OUTLINE subsection.
Error in .OTHER OUTLINE subsection.


%CEError in A-record.
Error in A-record.


%CEError in PLACE KEEPOUT subsection
Error in PLACE KEEPOUT subsection


%CEError in PLACE OUTLINE subsection
Error in PLACE OUTLINE subsection


%CEError in a drill center coordinates
Error in a drill center coordinates


%CEError in an area contour(AREA ID = %0d)
Error in an area contour(AREA ID = %0d)


%CEError in component subsection data: <%0s>
Error in component subsection data: <%0s>


%CEError in line #%0d : <%1s> of %2w file.
Error in line #%0d : <%1s> of %2w file.


%CEError in the S record GRAPHICS DATA: %0s
Error in the S record GRAPHICS DATA: %0s


%CEError in the S record GRAPHIC_DATA: %0s
Error in the S record GRAPHIC_DATA: %0s


%CEError in the contour of the cut (CUT number = %0d)
Error in the contour of the cut (CUT number = %0d)


%CEError in the outline contour
Error in the outline contour


%CEError in writing to export file
Error in writing to export file


%CEError scanning a cut ID: <%0s>
Error scanning a cut ID: <%0s>


%CEError scanning a drill diameter: <%0s>
Error scanning a drill diameter: <%0s>


%CEError scanning a segment start: <%0s>
Error scanning a segment start: <%0s>


%CEError: Cannot find .UNI(TS) subsection
Error: Cannot find .UNI(TS) subsection


%CEError: The part <%0w> found, it is not an OTHER_OUTLINE part.
Error: The part <%0w> found, it is not an OTHER_OUTLINE part.


%CEError: The part outline contour is not closed
Error: The part outline contour is not closed


%CEError: There is no board in the assembly
Error: There is no board in the assembly


%CEError: There is no component shape information in this file.
Error: There is no component shape information in this file.


%CEError: Too many fields in the record: <%0s>
Error: Too many fields in the record: <%0s>


%CEError: Unknown UNIT in the J record: <%0s>
Error: Unknown UNIT in the J record: <%0s>


%CEError: Unknown area position <%0s>
Error: Unknown area position <%0s>


%CEError: Unknown unit for the board depth <%0s>
Error: Unknown unit for the board depth <%0s>


%CEError: can't define version
Error: can't define version


%CEError: can't set csys for OTHER OUTLINE part to export.
Error: can't set csys for OTHER OUTLINE part to export.


%CEError: could not create a component <%0w> ( ECAD name <%1s> alternate name <%2s>)
Error: could not create a component <%0w> ( ECAD name <%1s> alternate name <%2s>)


%CEError: could not create an other outline <%0w> (ECAD name <%1s> Pro/E name <%2s>)
Error: could not create an other outline <%0w> (ECAD name <%1s> Pro/E name <%2s>)


%CEError: incorrect RECORG_TAG <%0s>
Error: incorrect RECORG_TAG <%0s>


%CEError: there is no object to be transferred
Error: there is no object to be transferred


%CEError: there is no outline contour
Error: there is no outline contour


%CEError: too long field #%0d in the record:<%1s>
Error: too long field #%0d in the record:<%1s>


%CEError: trying to import outline for nonempty part
Error: trying to import outline for nonempty part


%CEError: unknown GRAPHIC_DATA_NAME <%0s>
Error: unknown GRAPHIC_DATA_NAME <%0s>


%CEError: wrong number of fields in an S record.
Error: wrong number of fields in an S record.


%CEError: wrong placement parameters for the component <%0s>
Error: wrong placement parameters for the component <%0s>


%CEError:End of file after a DRILL subsection header
Error:End of file after a DRILL subsection header


%CEErrors in contours detected - the part aborted
Errors in contours detected - the part aborted


%CEErrors in imported data
Errors in imported data


%CIExport succeded with warnings.
Export succeeded with warnings.


%CIImport succeded with warnings.
Import succeeded with warnings.


%CIImport succeeded with errors.
Import succeeded with errors.


%CEImport was aborted; No changes in import.
Import was aborted; No changes in import.


%CEInternal error: Memory allocation problem.
Internal error: Memory allocation problem.


%CEInternal error:could not create the default csys
Internal error:could not create the default csys


%CWIntersected contours detected - %0d contour(s) removed
Warning: Intersected contours detected - %0d contour(s) removed


%CIIrregularities in contours detected and fixed
Irregularities in contours detected and fixed


%CPKeep
Keep


%CEKeep Missing
Keep Missing


%CILibrary file version 2.0 has been detected
Library file version 2.0 has been detected


%CILibrary file version 3.0 has been detected
Library file version 3.0 has been detected


%CEMember <%w> can not be selected
Member <%0w> can not be selected


%CINeutral file version 1.0 has been detected
Neutral file version 1.0 has been detected


%CIOther outline <%0w> assembled
Other outline <%0w> assembled


%CEPart is too thin. Could not create geometry - the part aborted.
Part is too thin. Could not create geometry - the part aborted.