msgtxt_int.txt

来自「proe5.0野火版下载(中文版免费下载)」· 文本 代码 · 共 949 行 · 第 1/2 页

%CISurface entities cannot be selected for replacement
Surface entities cannot be selected for replacement.


%CLSave
Save


%CECannot uncheck all geometry options.
Cannot uncheck all geometry options.


%CE"Error(s) while generating plot(s)."
"Error(s) while generating plot(s)."


%CECan not open CATIA command file.
Can not open CATIA command file.


%CENo references were found.
No references were found.


%CEThere are no parts pairs within clearance.
There are no parts pairs within clearance.


%CEThere are too many facets.  Unable to send model to Catia.
There are too many facets. Unable to send model to CATIA.


%CEThere are too many vertices.  Unable to send model to Catia.
There are too many vertices. Unable to send model to CATIA.


%CEUnable to triangulate highlighted edge.  Aborting output.
Unable to triangulate highlighted edge. Aborting output.


%CEUnable to triangulate highlighted surface.  Aborting output.
Unable to triangulate highlighted surface. Aborting output.


%CEUnable to triangulate part.  Aborting output.
Unable to triangulate part. Aborting output.


%CEcannot write file disk is full
Cannot write file, disk is full.


%CICosmos trimmed surface file has been created.
Cosmos trimmed surface file has been created.


%CIDisplaying the only reference.
Displaying the only reference.


%CIPlotter Selection
Plotter Selection


%CLExport
Export


%CLImport
Import


%CLSelect All
All


%CPEnter CATIA model path:
Enter CATIA model path: 


%CWWARNING: This CDRS data is older than original one.
WARNING: This CDRS data is older than original one.


%CPPlease Enter CADDS5 Model Name:
Please Enter CADDS5 Model Name:


%CPSelect a coordinate system for CADDS5 import.
Please select a coordinate system to place CADDS5 model.


%CECan't write to the current directory:
Can't write to the current directory: %0w.


%CECan't export non-part/non-assembly models
Can't export non-part/non-assembly models.


%CEError during Pro/E -> CADDS5 export
Error during Pro/E -> CADDS5 export (err %0d).


%CEEmpty CADDS5 model name
Empty CADDS5 model name.


%CECan't open CADDS5 model
Can't open CADDS5 model: %0s.


%CECan't find CADDS5 model
Can't find CADDS5 model: %0s.


%CECan't read CADDS5 model
Can't read CADDS5 model: %0s.


%CECan't search in directory of CADDS5 model
Can't search in directory of CADDS5 model: %0s.


%CEInvalid character(s) in directory name of CADDS5 model -
Invalid character(s) in directory name of CADDS5 model : %0s.


%CEError during CADDS5 -> Pro/E import
Error during CADDS5 -> Pro/E import (err %0d).


%CEToo long path name for CADDS5 model
Too long path name for CADDS5 model: %0s.


%CEERROR: Current converter can't open CADDS5 part.
ERROR: Current converter Rev%0d can't open CADDS5 Rev%1d part:%2s.


%CWWARNING: Current converter Rev%0d is interacting with ODB_DAEMON Rev%1d.
WARNING: Current converter Rev%0d is interacting with ODB_DAEMON Rev%1d.


%CWWARNING: Invalid BREPs in CADDS part
WARNING: Invalid %0dBREPs in CADDS part:%1s. Please run CHECK_DBASE in CADDS.
 

%CWWARNING: Can't convert CADDS4x part
WARNING: Can't convert CADDS4x part:%0s. Please open&save in CADDS5 Rev 9 or above.


%CECan't append to Pro/E part CADDS assembly
Can't append to Pro/E part CADDS assembly: %0s.

 
%CWWARNING: Selected coordinate system does not belong to current assembly.
WARNING: Selected coordinate system does not belong to current assembly. Try again.


%CIExisting CADDS part is out-of-date
Existing CADDS part %0s is out-of-date. Pro/E Sys Rev: last exported %1d < current %2d.


%CICADDS part has been updated
CADDS part %0s has been updated.


%CWWARNING: Existing CADDS part is up-to-date. Export is ignored
WARNING: Existing CADDS part %0s is up-to-date. Export is ignored.


%CECan't open CADDS5 model for export update
Can't open CADDS5 model for export update: %0s.


%CIThe processing problems and warnings:
The processing problems and warnings:


%CWcannot read surface generatrix.
cannot read surface generatrix.


%CWdecrease in parameter sequence of spline.
decrease in parameter sequence of spline.


%CWB-spline of degree greater not supported.
B-spline of degree greater not supported.


%CWB-spline curve has zero weights.
B-spline curve has zero weights.


%CWB-spline surface has zero weights.
B-spline surface has zero weights.


%CWB-spline surface has zero parameter extent.
B-spline surface has zero parameter extent.


%CWB-spline surface has zero outline.
B-spline surface has zero outline.


%CWcannot offset surface.
cannot offset surface.


%CWbad generatrix of surface.
bad generatrix of surface.


%CWparameter data incomplete.
parameter data incomplete.


%CWplane boundary is not planar.
plane boundary is not planar.


%CWbounded plane adjusted to its boundary.
bounded plane adjusted to its boundary.


%CWview clipping plane not processed.
view clipping plane not processed.


%CWdecrease in parameter sequence of B-spline.
decrease in parameter sequence of B-spline.


%CWwrong direction of model space curve(s).
wrong direction of model space curve(s).


%CWB-spline curve has same starting/ending parameters.
B-spline curve has same starting/ending parameters.


%CWdegenerate knots.
degenerate knots.


%CWdecrease in knot sequence.
decrease in knot sequence.


%CWdegenerate surface of revolution.
degenerate surface of revolution.


%CWtoo many points to be put into a single curve.
too many points to be put into a single curve.


%CWcannot trim the curve.
cannot trim the curve.


%CWonly construction curves processed.
only construction curves processed.


%CWignored in PART mode.
ignored in PART mode.


%CWSkipped since not used in supported solid.
Skipped since not used in supported solid.


%CWSkipped because of conflicting geometry information.
Skipped because of conflicting geometry information.


%CWSkipped since entity is bad.
Skipped since entity is bad.


%CWSkipped simple face because of bad boundary.
Skipped simple face because of bad boundary.


%CWSkipped simple face since no primitive surface.
Skipped simple face since no primitive surface.


%CWSkipped bad edge topology.
Skipped bad edge topology.


%CWdiscontinuous surface.
discontinuous surface.


%CWdiscontinuous curve.
discontinuous curve.


%CWboundary curve not closed.
boundary curve not closed.


%CWcannot convert surface.
cannot convert surface.


%CWcomposite curve has gap(s).
composite curve has gap(s).


%CWzero area surface skipped.
zero area surface skipped.


%CWzero length boundary curve skipped.
zero length boundary curve skipped.


%CWtopology pair(s) skipped.
topology pair(s) skipped.


%CWzero length curve skipped.
zero length curve skipped.


%CWcan't represent surface with maximum accuracy.
can't represent surface with maximum accuracy.


%CWTrimmed point is not within model accuracy.
Trimmed point is not within model accuracy.


%CWMixed trimming unsupported.
Mixed trimming unsupported.


%CWenormous coordinates.
enormous coordinates.


%CWself_intersecting ruled surface skipped.
self_intersecting ruled surface skipped.


%CWzero area boundary skipped.
zero area boundary skipped.


%CWnot processed
not processed


%CItype_lower
type


%CIform_lower
form


%CIProcessing information of model
Processing information of model


%CIProcessing finished at:
Processing finished at:


%CITotal processing time:
Total processing time:


%CIReading began at:
Reading began at:


%CIReading finished at:
Reading finished at:


%CITotal reading time:
Total reading time:


%CIPro/ENGINEER STEP Import Log File
Pro/ENGINEER STEP Import Log File


%CISTEP file header information
STEP file header information


%CICADDS5 model has been created.
CADDS5 model %0s has been created.


%CLSingle File
Single File


%CLSeparate Parts Only
Separate Parts Only


%CLSeparate All Objects
Separate All Objects


%CIImported Entity Name
Name


%CICount
Count


%CIcatia_layer_stats_header
   Layer  Curves   Surfs   Faces   Total


%CWInvalid Layer Name
Invalid Layer Name


%CINot allowed chars in layer name were changed to _
Not allowed characters in layer name were changed to _


%CWThis name is either too long or has already been used.
This name is either too long or has already been used.


%CWThe id is out of range.
The id is out of range.


%CW:Problem(s) encountered while exporting current model.
Problem(s) encountered while exporting current model.


%CW:Unable to create solid on export (failed topology), exporting surfaces only.
Unable to create solid on export (failed topology), exporting surfaces only.


%CE:Unable to export because of serious problem.
Unable to export %0w because of serious problem (%1d).


%CE:Unable to export because of invalid topology - too short edges.
Unable to export %0w because of invalid topology - too short edges.


%CPUse PROTRUSION USE QUILT to create base feature from closed quilts
Use SOLIDIFY to create base feature from closed quilts.


%CI%0d facets have been created.
%0d facets have been created.


%CLTLBJT
JT