msgtxt_pip.txt

proe5.0野火版下载(中文版免费下载)

%CIBEND LOCATION INFO
Bend Location Info


%CIBEND MACHINE INFO
Bend Machine Info


%CIBend Loc  Csys (Highlighted in %0w) : %1w
Bend Loc  Csys (Highlighted in %0w) : %1w


%CIBend Mach Csys (Highlighted in %0w) : %1w
Bend Mach Csys (Highlighted in %0w) : %1w


%CECannot insert fitting on the end of flexible segment.
Cannot insert fitting on the end of flexible segment.


%CPConfirm removing both types of piping report info.
Confirm removing both types of piping report info.


%CPDelete pipe break as well? [Y]:
Delete pipe break as well?|||Yes


%CPEnter new name for pipe line [%0w]:
Enter a new name for the selected pipeline|||%0w


%CPEntry port coordinate system names begin with 'PORT'.  Please select again.
Entry port coordinate system names begin with 'PORT'.  Please select again.


%CPHighlighted pipe line will be deleted. Please confirm.
Highlighted pipe line will be deleted. Please confirm.


%CIInfo type  :  %0w.
Info type  :  %0w.


%CILINE STOCK NAMES
LINE STOCK NAMES


%CIPipe Segment   (Highlighted in %0w) : %1w
Pipe Segment   (Highlighted in %0w) : %1w


%CIPipeline renamed successfully.
Pipeline renamed successfully.


%CPPlease confirm request to quit the fitting insertion.
Please confirm request to quit the fitting insertion.


%CLRED_COLOR
  Red


%CPRetrieve X coordinate from Bend Location Info.
Retrieve X coordinate from Bend Location Info.


%CPRetrieve Y coordinate from Bend Location Info.
Retrieve Y coordinate from Bend Location Info.


%CPRetrieve Z coordinate from Bend Location Info.
Retrieve Z coordinate from Bend Location Info.


%CPRetrieve bend angle from Bend Location Info.
Retrieve bend angle from Bend Location Info.


%CPRetrieve bend angle from Bend Machine Info.
Retrieve bend angle from Bend Machine Info.


%CPRetrieve bend number from Bend Location Info.
Retrieve bend number from Bend Location Info.


%CPRetrieve bend number from Bend Machine Info.
Retrieve bend number from Bend Machine Info.


%CPRetrieve bend radius from Bend Location Info.
Retrieve bend radius from Bend Location Info.


%CPRetrieve bend radius from Bend Machine Info.
Retrieve bend radius from Bend Machine Info.


%CPRetrieve offset from Bend Machine Info.
Retrieve offset from Bend Machine Info.


%CPRetrieve twist angle from Bend Machine Info.
Retrieve twist angle from Bend Machine Info.


%CPSame name exists. Enter new name for pipe line [%0w]:
Same name exists. Enter a new name for the selected pipeline|||%0w


%CPSame name exists. Enter new name for pipe line [QUIT]:
Same name exists. Enter new name for pipe line [Quit]


%CISegment    :  %0w.
Segment    :  %0w.


%CISegment has been set up to provide Info in a Pro/Report table.
Segment has been set up to provide Info in a Pro/Report table.


%CPSelect a segment assigned for use in Pro/Report.
Select a segment assigned for use in Pro/Report.


%CPSelect fitting to delete.
Select fitting to delete.


%CPSelect fitting.
Select fitting.


%CPSelect pipe line for rename.
Select pipe line for rename.


%CPSelected csys does not below active assembly.
Selected coordinate system does not below active assembly. Select again.


%CPSelected segment is not straight.  Please select again.
Selected segment is not straight.  Please select again.


%CPSelected segment should be from another pipe line.
Can not branch to current pipe line.  Please select again.


%CITITLE : Piping Segment Bend Info for Pro/Report
                    Piping Segment Bend Info for Pro/Report


%CEFitting zero reference is not set.
Fitting zero reference is not set.


%CPSelect entry port for referensing.
Please specify entry port to use for twist operations.


%CP Automatically reroute fitting child to keep current location?[Y]:
Automatically reroute fitting child to keep current location?|||Yes


%CECan not change twist reference port.
Can not change twist reference port.


%CIRef port in red, Zero Ref in blue, Align Ref in red.
Ref port in red, Zero Ref in blue if present, Align Ref in red if aligned.


%CPRetrieve centerline length of the pipe line.
Retrieve centerline length of the pipe line.


%CPRetrieve pre-cut length of the pipe line.
Retrieve pre-cut length of the pipe line.


%CEPipe segment without flexible portions not allowed for clocking angle calculation.
Segment has no flexible portions. Select another.


%CPSelect initial coordinate system at one end of the segment.
Select initial coordinate system at highlighted end of the segment.


%CPSelect 2nd coordinate system.
Select final coordinate system at highlighted end of selected segment.


%CEInvalid coordinate system for clocking angle calculation; Select again.
Invalid coordinate system for clocking angle calculation; Select again.


%CEBend and miter cut corners are not allowed for clocking angle calculation.
Bend and miter cut corners are not allowed for clocking angle calculation.


%CI                 Segment Clocking Angle Information
                 Segment Clocking Angle Information


%CI Start Port      Segment Name    Clocking Angle     End Port        
 Start Port      Segment Name    Clocking Angle     End Port        


%CIInfo type  : Clocking Angle Info
Info type  : Clocking Angle Info


%CIRetrieve clocking angle.
Retrieve clocking angle.


%CIRetrieve information for clocking angle.
Retrieve information for clocking angle.


%CIHiltd geom violates MINIMUM_BEND_RADIUS from %0f to %1f
Hiltd geom violates MINIMUM_BEND_RADIUS from %0f to %1f


%CIof line stock %0w.
of line stock %0w.


%CIRetrieve name of initial coordinate system.
Retrieve name of initial coordinate system.


%CIRetrieve name of final coordinate system.
Retrieve name of final coordinate system.


%CIActive Assembly : %0w
Active Assembly : %0w


%CIMagenta
Magenta


%CIOrange
Orange


%CISETUP INST
SETUP INST


%CIThese options control theoretical piping bend intersection
These options control theoretical piping bend intersection


%CIShow coordinate systems with associated bend machine information.
Show coordinate systems with associated bend machine information.


%CIShow coordinate systems with associated bend location information.
Show coordinate systems with associated bend location information.


%CIREMOVEINST
REMOVEINST


%CIBEND_CSYS
BEND_CSYS


%CIReport Information was not associated with selected coordinate system.
Report Information was not associated with selected coordinate system.


%CIBend Info Csys (Highlighted in Red) : %0w
Bend Info Csys (Highlighted in Red) : %0w


%CIBend Loc  Segment (Highlighted in %0w) : %1w
Bend Loc  Segment (Highlighted in %0w) : %1w


%CIBend Mach Segment (Highlighted in %0w) : %1w
Bend Mach Segment (Highlighted in %0w) : %1w


%CI        Piping Bend Info for Coordinate System for Pro/Report
        Piping Bend Info for Coordinate System for Pro/Report


%CIReport setup for coordinate system %0w and segment exists.
Report setup for coordinate system %0w and segment exists.


%CPPlease confirm request to quit the fitting redefining.
Please confirm request to quit the fitting redefinition.


%CIRetrieve user defined parametrs for bends.
Retrieve user defined parameters for bends.


%CEInvalid combination of inputs.
Invalid combination of inputs.


%CESecond csys must lie at the other end of the same segment as the initial csys.
Final coordinate system must lie at highlighted end of the specified segment.


%CIAlready exist an evaluate feature with the same references.
Already exist an evaluate feature with the same references.


%CIConfirm removing clocking angle report info.
Confirm removing clocking angle report info.


%CIReport setup for coordinate system and segment exists.
Report setup for coordinate system and segment exists.


%CLGREEN_COLOR
Green


%CPConfirm removing bend location report info.
Confirm removing bend location report info.


%CPConfirm removing bend machine report info.
Confirm removing bend machine report info.


%CPSelect or create a bend point
Select or create a bend point


%CPSelected segment does not contain report data. Please reselect segment.
Selected segment does not contain report data. Please reselect segment.


%CLAlong segment
Along_segment


%CLNormal to segment
Normal to segment


%CLNormal to plane
Normal to plane


%CIMOVE DRAG POINT
MOVE DRAG POINT


%CIMOVE DRAG SEGMENT
MOVE DRAG SEGMENT


%CWWARNING: feature belongs to frozen pipe, feature frozen (id:%0d).
WARNING: feature belongs to frozen pipe, feature frozen (id:%0d).


%CPSelect a csys assigned for use in Pro/Report.
Select a coordinate system assigned for use in Pro/Report.


%CLbend_name
bend_name


%CIIllegal parameter name found. Continue Edit? [Y]:
Illegal parameter name found. Continue Edit? [Y]:


%CLRetrieve bend name.
Retrieve bend name.


%CPPlease enter the new extention length, the current value is %0s. [Quit]:
Please enter the new extention length,|||%0s


%CPUse whole point array ?
Do you want to route through the whole datum point array ?


%CPSpecify curves/edges to follow.
Specify curves/edges to follow.


%CPSelect only lines and arcs.
Select only lines and arcs.


%CECurve contains arcs, set corner type to BEND.
Curve contains arcs, set corner type to BEND.


%CWCannot modify follow curve arc corner.
Current selection cannot be modified, corner controlled by follow feature.


%CI    Pipe Width: %0f
    Pipe Width: %0f\n


%CI    Pipe Height: %0f
    Pipe Height: %0f\n


%CLADLG_Piping Params
Piping Params


%CLADLG_Pipe Info
Pipe Info


%CPEnter extension offset with reference to pipe edge [%0f]:
Enter extension offset with reference to pipe edge|||%0f


%CICurrent Line Stock: %0ws
Current Line Stock: %0ws


%CIPiping Segment Bend Info for Pro/Report
Piping Segment Bend Info for Pro/Report


%CPDo you want to place similar fittings at parrallel location?
Do you want to place similar fittings at parrallel location?


%CPSelect insulation to save on disk.
Select insulation to save on disk.


%CPSelect insulation to edit.
Select insulation to edit.


%CENo insulation in model %0w.
No insulation in model %0w.


%CEInsulation %0w already exists in model %1w
Insulation %0w already exists in model %1w


%CPSelect insulation to rename.
Select insulation to rename.


%CPEnter new name for insulation [QUIT] :
Enter new name for insulation [Quit]


%CIInsulation name changed successfully.
Insulation name changed successfully.


%CPSelect insulation to delete.
Select insulation to delete.


%CIInsulation Dir
Insulation Dir


%CIINSULATION NAMES
INSULATION NAMES


%CIINSULATION MODIFIED
INSULATION MODIFIED


%CISearch Insulation directory.
Search Insulation directory.


%CWInsulation %0w already exists, overwrite ? [N]
Insulation %0w already exists, overwrite ?|||No


%CPEnter insulation name
Enter insulation name [Quit]


%CISOLID NAME
SOLID NAME


%CISTART PART
START PART


%CLTLBInsulation
Insulation


%CWInsulation Seg
Insulation Seg


%CPEnter curve length ratio ( %2f <= ratio <= %3f ) [%0s]:
Enter curve length ratio ( %2f <= ratio <= %3f )|||%0s


%CPEnter curve length parameter ( %2f <= parameter <= %3f ) [%0s]:
Enter curve length parameter ( %2f <= parameter <= %3f )|||%0s


%CPEnter offset from plane ( %2f <= offset <= %3f ) [%0s]:
Enter offset from plane (%2f <= offset <= %3f)|||%0s


%CPEnter offset from corner ( %2f <= offset <= %3f ) [%0s]:
Enter offset from corner ( %2f <= offset <= %3f )|||%0s


%CI                      Holes Report 
                      Holes Report 


%CI Hole #      Offset          Angle         Diameter    
 Hole #      Offset          Angle         Diameter    


%CIRetrieve holes report.
Retrieve holes report.


%CIRetrieve angle from holes report.
Retrieve angle from holes report.


%CIRetrieve diameter from holes report.
Retrieve diameter from holes report.


%CIRetrieve hole number from holes report.
Retrieve hole number from holes report.


%CIRetrieve offset from holes report.
Retrieve offset from holes report.


%CIRetrieve holes parameters.
Retrieve holes parameters.


%CEInsulation solid failed. Trajectory of insulation is too small.
Insulation solid failed. Trajectory of insulation is too small.


%CECannot make insulation solid. Unable to retrieve linestock parameters. 
Cannot make insulation solid. Unable to retrieve linestock parameters. 


%CEInsulation solid failed.Feature intersection error.
Insulation solid failed.Feature intersection error.


%CECannot make insulation solid. Cannot construct geometry with current parameters.
Cannot make insulation solid. Cannot construct geometry with current parameters.


%CPDelete pipe cut as well? [Y]:
Delete pipe cut as well?|||Yes


%CPSelect the new parent fitting.
Select the new parent fitting.


%CWTwo pipe segments with different line stock will be connected.
Two pipe segments with different line stock will be connected.


%CISelect the fitting for port reference.
Select the fitting for port reference.


%CLPnt along segment
Pnt along segment


%CL1st Pnt Along segment
1st Pnt Along segment


%CL2nd Pnt Along segment
2nd Pnt Along segment


%CPEnter curve length ratio ( %2e <= ratio <= %3e ) [%0s]:
Enter curve length ratio ( %2e <= ratio <= %3e )|||%0s


%CPEnter curve length parameter ( %2e <= parameter <= %3e ) [%0s]:
Enter curve length parameter ( %2e <= parameter <= %3e )|||%0s


%CPEnter offset from plane ( %2e <= offset <= %3e ) [%0s]:
Enter offset from plane (%2e <= offset <= %3e)|||%0s


%CPEnter offset from corner ( %2e <= offset <= %3e ) [%0s]:
Enter offset from corner ( %2e <= offset <= %3e )|||%0s


%CP Automatically reroute all joint children to keep current location?[Y]:
Automatically reroute all joint children to keep current location?|||Yes


%CWPipe Suppress
Pipe Suppress


%CWPipe Split
Pipe Split


%CPEnter offset from fitting port ( %2e <= offset <= %3e ) [%0s]:
Enter offset from fitting port ( %2e <= offset <= %3e )|||%0s


%CECan not create flexible segment with fixed length.
Can not create flexible segment with fixed length.


%CISTOCK NAMES
STOCK NAMES


%CILINE NAMES
LINE NAMES


%CEFeature aborted. There is a missing start feature.
Feature aborted. There is a missing start feature.


%CPRetrieve solid part common name.
Retrieve solid part common name.