msg_dstudy.txt

proe5.0野火版下载(中文版免费下载)

%CEOptimization error
An error occurred during optimization.
优化过程中出错。

%CIOptimization success
The part was successfully optimized.
此部件优化成功。

%CISensitivity calculation percentage
Sensitivity calculation: %0d%% done.
敏感度计算: 完成 %0d%%。

%CIOptimization calculation percentage
Optimization calculation: %0d%% done.
优化计算: 完成 %0d%%。

%CIOptimizing...
Optimizing...
正在优化...

%CICalculating sensitivity...
Calculating sensitivity...
正在计算敏感度...

%CIEnd of sensitivity calculation
Sensitivity calculation completed.
完成敏感度计算。

%CECannot select read-only feature.
Cannot select read-only feature.
无法选择只读特征。

%CISuccessful reversion
Model was successfully reverted to its original state.
此模型成功恢复到其原始状态。

%CIFeasibility success
A feasible solution has been successfully found.
已找到可行解决方案。

%CWOptimization aborted
Optimization has been aborted.
优化已被中止。

%CWSensitivity aborted
Sensitivity calculation has been aborted.
敏感度计算已被中止。

%CLInterrupt Calculation
Interrupt Calculation
中断计算

%CLDo You Want To Interrupt Calculation
Do you really want to interrupt computation?
你确实想中断计算吗？

%CENoGoal goal option is not allowed in Optimization
NoGoal goal option is not allowed in Optimization
在优化操作中不允许 NoGoal 目标选项

%CEFeasibility error
An error occurred during feasibility analysis.
可行性分析中出错。

%CWFeasibility aborted
Feasibility calculation has been aborted.
分析计算已被中止。

%CIEnd of optimization step
Completing step %0d of optimization.
已完成优化步骤 %0d。

%CITable generation completed successfully
Table generation completed successfully
已成功生成表

%CILoading modified model
Loading modified model...
正在加载修改后的模型...

%CIGenerating main table
Generating main table...
正在生成主表...

%CISens: model has changed
The model has changed. The old sensitivity settings will be lost
模型已改变，将失去原敏感度设定。

%CIOptim: model has changed
The model has changed. The old optimization settings will be lost
模型已改变，将失去原优化值设定。

%CITest %0d in progress
Test %0d in progress...
正在测试%0d...

%CENo design constraints were selected for feasibility study.
No design constraints were selected for feasibility study.
没有为可行性研究选择设计约束。

%CIOptimization: no improvement
Optimization completed: no improvement over the original model found.
优化已完成: 未找到对原始模型的改进。

%CIOptimization: no convergence
Optimization stopped: maximum number of iterations exceeded.
优化停止: 超过最大简单迭代次数。

%CIFeasibility: no convergence
Feasibility analysis stopped: maximum number of iterations exceeded.
可行性分析停止: 超过最大简单迭代次数。

%CIDesign study: solution not found
No feasible solution has been found.
未找到可行性解决方案。

%CIFeasibility: no change
The original model is feasible.
原始模型可行。

%CLErase Design Study
Erase Design Study
拭除设计研究

%CLCurrent Design Study Will Be Erased
Current Design Study will be erased. Continue?
当前设计研究将被拭除。是否继续?

%CIStarting design study
Starting design study %0w.
开始设计研究%0w。

%CIDesign study successfully retrieved
Design study %0w was successfully retrieved.
已成功检索到设计研究%0w。

%CEDesign study cannot be retrieved
Error while retrieving Design Study %0w; most likely one of the design variables/goals/constraints is missing.
检索设计研究%0w时出错;很可能是由于丢失了设计变量/目标/约束中的一个。

%CIDesign study successfully saved
Design study %0w was successfully saved.
设计研究%0w已成功保存。

%CEDesign study cannot be saved
Error while saving Design study %0w.
保存设计研究%0w时出错。

%CIDesign study successfully deleted
Design study %0w was successfully deleted.
设计研究 %0w 已成功删除。

%CEDesign study cannot be deleted
Error while deleting Design study %0w.
删除设计研究%0w时出错。

%CENo saved design studies of given type
There are no saved design studies of this type.
没有已保存的此类设计研究。

%CIModel changed successfully
Model was successfully modified.
模型修改成功。

%CWOptimization feature regeneration warning
Optimization Feature (id = %0d) will not be regenerated during this Design Study.
优化特征(标识=%0d)在此设计研究期间将不会再生。

%CEOptimization feature: recursive regeneration error
Cannot regenerate one optimization feature (id = %0d in model %1w) from inside another. Suppress either one or redefine.
不能从一个优化特征内部再生另一个优化特征(在模型%1w中id = %0d)。请隐含其中一个或重新定义。

%CEOptimization feature: recursive call
This failure is caused by an attempt to regenerate another optimization feature.
这种失败是由于试图再生另一优化特征而导致的。

%CEOptimization failure: recursive call
Design Study failed because of an attempt to regenerate an optimization feature (id = %0d in model %1w).
由于试图再生优化特征而导致"设计研究"失败(在模型%1w中id = %0d)。

%CEOptimization feature retrieval error
Optimization Feature data error; most likely, one of the design variables/goals/constraints is missing.
优化特征数据错误; 很可能是由于丢失了其中一个设计变量/目标/约束。

%CEBad Input
Input Error
输入错误

%CLParameter Error
Parameter Error
参数错误

%CLFeature Error
Feature Error
特征错误

%CLReversion Error
Reversion Error
反向错误

%CLRegeneration Error
Regeneration Error
再生错误

%CEBad goal type
Bad goal type
目标类型错误

%CEBad AnimateModel value
Bad AnimateModel value
动画模型值错误

%CEBad max number of iterations
Bad max number of iterations
最大迭代次数错误

%CEBad ConvergencePercentage value
Bad ConvergencePercentage value
收敛百分比值错误

%CEBad GraphGoal value
Bad GraphGoal value
图形目标值错误

%CEBad GraphConstraints value
Bad GraphConstraints value
图形约束值错误

%CEBad GraphVariables value
Bad GraphVariables value
图形变量值错误

%CENo design variables were selected
No design variables were selected
未选择设计变量

%CENo goal parameters selected
No goal parameters selected
未选择目标参数

%CEInvalid goal parameter was selected
Invalid goal parameter was selected
选择了无效的目标参数

%CEBad algorithm type
Bad algorithm type
算法类型错误

%CEThere are duplicate constraints
There are duplicate constraints
约束出现重复

%CEThere are duplicate design variables (dimensions)
There are duplicate design variables (dimensions)
设计变量(尺寸)出现重复

%CEThere are duplicate design variables (parameters)
There are duplicate design variables (parameters)
设计变量(参数)出现重复

%CEMinimum and/or maximum value are chosen improperly
Minimum and/or maximum value are chosen improperly for %0w
为%0w选择了不正确的最小值和/或最大值

%CEDuplicate name. Type in another
The supplied name is already used. Type in another name
提供的名称已经被使用。请键入另一名称

%CEData is corrupted
Data is corrupted
数据被破坏

%CEAn invalid parameter was selected
An invalid parameter was selected
选择了无效的参数

%CEInvalid number of points specified
Invalid number of points specified
指定了无效的点数

%CEInvalid min value
Invalid min value
无效的最小值

%CEInvalid max value
Invalid max value
无效的最大值

%CEThe min and max values are the same
The min and max values are the same
最小值和最大值相同

%CEThe min value is greater than the max value
The min value is greater than the max value
最小值大于最大值

%CEList of parameters is empty
List of parameters is empty
参数列表为空

%CEInvalid limit value
Invalid limit value
无效极限值

%CEParameter evaluation failed for all values
Parameter evaluation failed for all values
对所有数值的参数计算失败

%CEParameter evaluation failed for some values
Parameter evaluation failed for some values
对部分数值的参数计算失败

%CEInternal error in parameter list generation
Internal error in parameter list generation
参数列表生成时出现内部错误

%CENo available top-level model parameters
There are no available top-level model parameters
没有可用的顶级模型参数

%CENo available top-level AF parameters
There are no available top-level analysis features' parameters
没有可用的顶级分析特征的参数

%CECannot initialize a parameter (goal)
Cannot initialize a parameter (design goal)
不能初始化参数(设计目标)

%CECannot initialize a parameter (variable)
Cannot initialize a parameter (design variable)
不能初始化参数(设计变量)

%CECannot return model to previous state
Cannot return model to previous state
不能将模型恢复为先前状态

%CEOnly one optimization feature allowed
Only one Optimization Feature per model is allowed
每个模型只允许有一个优化特征

%CEExternal reference missing
Missing external reference for %0w. Cannot perform design study.
%0w缺少外部参照。无法执行设计研究。

%CIWriting record number
Writing record number %0d (out of %1d).
书写记录数%0d (从%1d)。

%CISearch for local extremum
Search for local extremum %0d (out of %1d).
搜索局部极值%0d(在%1d以外)。

%CIFound local extremum
Found local extremum %0d.
找到局部极值%0d。

%CIApproximation error level
Approximation error level %0f %%.
近似误差级%0f %%。

%CISensitivity Plot
Sensitivity Plot
敏感度曲线

%CIOptimization Goal Convergence Graph
Optimization Goal Convergence Graph
优化目标收敛图

%CINumber of Iterations
Number of Iterations 
迭代数 

%CIOptimization Dimension Convergence Graph
Optimization Dimension Convergence Graph
优化尺寸收敛图

%CIOptimization Limit Convergence Graph
Optimization Limit Convergence Graph
优化极限收敛图

%CIGloptDSLog 
Global optimization Design Study Log
全局优化设计研究日志

%CIBgnGlbOptDS
=== Begin Global Optimizer Design Space.=== 
=== 全局优化程序设计空间开始。=== 

%CIDsgnSpace
Design Space :
设计空间:

%CIMax
 Maximum.
 最大。

%CIMin
 Minimum.
 最小。

%CIAbsMin
 Absolute Minimum.
 绝对极小值。

%CIAbsMax
 Absolute Maximum.
 绝对极大值。

%CIFeasibility
Feasibility.
可行性。

%CIGoal
Goal : 
目标: 

%CINmbOfIt
Number of iterations :    
迭代数:    

%CINmbOfCrIt
Number of correct iterations :    
正确迭代数:    

%CIAprxErrLvl
Approximation error level  :    
近似错误级:    

%CIParGPOptmzr
Parameters for Gradient Projection Optimizer :
斜率投影优化程序参数

%CIOptConvTol
  - Optimization Convergence Tolerance : 
  - 优化收敛公差: 

%CIMaxNmbOptIt
  - Maximum Number of Optimization Iterations : 
  - 优化迭代最大数目: 

%CIResGlobOptmz
Results of Global Optimization.
全局优化结果。

%CIPrmeters
Parameters :
参数:

%CINoImprvmn
No Improvement.
无改进。

%CIEndGlDSpace
=== End of Global Optimizer Design Space.===
=== 全局优化设计空间结束。===

%CISrchLocExtr
Search for local extremum
搜索局部极值

%CIFndLocExtr
Found local extremums : 
找到局部极值: 

%CEOptimization start error
The model does not fully regenerate, optimization can not be performed.
模型并未完全再生，因此无法执行优化。