rough_back_bottle.trn

来自「proe5.0野火版下载(中文版免费下载)」· TRN 代码 · 共 68 行

! 08-JUL-98 I-01-13 JRE $$1 Changed TOOL_ORIENTATION from 0 to 270 for Zhimin.
 MACH_NAME           TURN
 MACH_ID             M0001
 NCL_FILE            N0002
 PRE_MACHINING_FILE  -
 POST_MACHINING_FILE -
 CUT_FEED            0.019
 ARC_FEED            -
 FREE_FEED           -
 RETRACT_FEED        0.3
 CUT_UNITS           IPR
 RETRACT_UNITS       IPR
 SCAN_TYPE           TYPE_1_CONNECT
 ROUGH_OPTION        ROUGH_ONLY
 STEPOVER_ADJUST     YES
 TRIM_TO_WORKPIECE   YES
 CUT_DIRECTION       REVERSE
 CORNER_FINISH_TYPE  STRAIGHT
 OUTPUT_POINT        CENTER
 GOUGE_AVOID_TYPE    TIP_&_SIDES
 STEP_DEPTH          0.1
 MIN_STEP_DEPTH      -
 TOOL_CLEARANCE      -
 END_STEP_DEPTH      -
 TOLERANCE           0.0005
 NUMBER_PASSES       0
 NUM_PROF_PASSES     1
 PROF_INCREMENT      0
 PROF_STOCK_ALLOW    0.06
 ROUGH_STOCK_ALLOW   0.06
 CUT_ANGLE           0
 Z_STOCK_ALLOW       0.06
 END_OVERTRAVEL      0.2
 CORNER_LENGTH       -
 CHAMFER_DIM         -
 CORNER_ANGLE        -
 CONCAVE_RADIUS      -
 CONVEX_RADIUS       -
 BACK_CLEAR_ANGLE    2
 SPINDLE_SPEED       600
 SPINDLE_SENSE       CW
 MAX_SPINDLE_RPM     250
 SPEED_CONTROL       CONST_SFM
 SPINDLE_RANGE       NO_RANGE
 RANGE_NUMBER        0
 CIRC_INTERPOLATION  ARC_ONLY
 NUMBER_OF_ARC_PTS   3
 COOLANT_OPTION      ON
 COOLANT_PRESSURE    NONE
 CUTCOM              OFF
 CUTCOM_TYPE         ALL_MOVES
 CUTCOM_REGISTER     0
 FIXT_OFFSET_REG     -
 POCKET_NUMBER       -
 TOOL_ORIENTATION    270
 PLUNGE_FEED         0.019
 PLUNGE_UNITS        IPR
 LEAD_RADIUS         0.5
 LEAD_STEP           0
 RETRACT_RATIO       0.1
 PLUNGE_ANGLE        63
 PULLOUT_ANGLE       0
 APPROACH_DISTANCE   0.2
 EXIT_DISTANCE       0
 ENTRY_ANGLE         -
 EXIT_ANGLE          -
 END_STOP_CONDITION  NONE