pdfcontentbyte.java

来自「有关对pdf操作的代码」· Java 代码 · 共 1,856 行 · 第 1/5 页

     */
    
    public void setLineDash(float unitsOn, float phase) {
        content.append("[").append(unitsOn).append("] ").append(phase).append(" d").append_i(separator);
    }
    
    /**
     * Changes the value of the <VAR>line dash pattern</VAR>.
     * <P>
     * The line dash pattern controls the pattern of dashes and gaps used to stroke paths.
     * It is specified by an <I>array</I> and a <I>phase</I>. The array specifies the length
     * of the alternating dashes and gaps. The phase specifies the distance into the dash
     * pattern to start the dash.<BR>
     *
     * @param       phase       the value of the phase
     * @param       unitsOn     the number of units that must be 'on'
     * @param       unitsOff    the number of units that must be 'off'
     */
    
    public void setLineDash(float unitsOn, float unitsOff, float phase) {
        content.append("[").append(unitsOn).append(' ').append(unitsOff).append("] ").append(phase).append(" d").append_i(separator);
    }
    
    /**
     * Changes the value of the <VAR>line dash pattern</VAR>.
     * <P>
     * The line dash pattern controls the pattern of dashes and gaps used to stroke paths.
     * It is specified by an <I>array</I> and a <I>phase</I>. The array specifies the length
     * of the alternating dashes and gaps. The phase specifies the distance into the dash
     * pattern to start the dash.<BR>
     *
     * @param       array       length of the alternating dashes and gaps
     * @param       phase       the value of the phase
     */
    
    public final void setLineDash(float[] array, float phase) {
        content.append("[");
        for (int i = 0; i < array.length; i++) {
            content.append(array[i]);
            if (i < array.length - 1) content.append(' ');
        }
        content.append("] ").append(phase).append(" d").append_i(separator);
    }

    /**
     * Changes the <VAR>Line join style</VAR>.
     * <P>
     * The <VAR>line join style</VAR> specifies the shape to be used at the corners of paths
     * that are stroked.<BR>
     * Allowed values are LINE_JOIN_MITER (Miter joins), LINE_JOIN_ROUND (Round joins) and LINE_JOIN_BEVEL (Bevel joins).<BR>
     *
     * @param       style       a value
     */
    
    public void setLineJoin(int style) {
        if (style >= 0 && style <= 2) {
            content.append(style).append(" j").append_i(separator);
        }
    }
    
    /**
     * Changes the <VAR>line width</VAR>.
     * <P>
     * The line width specifies the thickness of the line used to stroke a path and is measured
     * in user space units.<BR>
     *
     * @param       w           a width
     */
    
    public void setLineWidth(float w) {
        content.append(w).append(" w").append_i(separator);
    }
    
    /**
     * Changes the <VAR>Miter limit</VAR>.
     * <P>
     * When two line segments meet at a sharp angle and mitered joins have been specified as the
     * line join style, it is possible for the miter to extend far beyond the thickness of the line
     * stroking path. The miter limit imposes a maximum on the ratio of the miter length to the line
     * witdh. When the limit is exceeded, the join is converted from a miter to a bevel.<BR>
     *
     * @param       miterLimit      a miter limit
     */
    
    public void setMiterLimit(float miterLimit) {
        if (miterLimit > 1) {
            content.append(miterLimit).append(" M").append_i(separator);
        }
    }
    
    /**
     * Modify the current clipping path by intersecting it with the current path, using the
     * nonzero winding number rule to determine which regions lie inside the clipping
     * path.
     */
    
    public void clip() {
        content.append("W").append_i(separator);
    }
    
    /**
     * Modify the current clipping path by intersecting it with the current path, using the
     * even-odd rule to determine which regions lie inside the clipping path.
     */
    
    public void eoClip() {
        content.append("W*").append_i(separator);
    }
    
    /**
     * Changes the currentgray tint for filling paths (device dependent colors!).
     * <P>
     * Sets the color space to <B>DeviceGray</B> (or the <B>DefaultGray</B> color space),
     * and sets the gray tint to use for filling paths.</P>
     *
     * @param   gray    a value between 0 (black) and 1 (white)
     */
    
    public void setGrayFill(float gray) {
        content.append(gray).append(" g").append_i(separator);
    }
    
    /**
     * Changes the current gray tint for filling paths to black.
     */
    
    public void resetGrayFill() {
        content.append("0 g").append_i(separator);
    }
    
    /**
     * Changes the currentgray tint for stroking paths (device dependent colors!).
     * <P>
     * Sets the color space to <B>DeviceGray</B> (or the <B>DefaultGray</B> color space),
     * and sets the gray tint to use for stroking paths.</P>
     *
     * @param   gray    a value between 0 (black) and 1 (white)
     */
    
    public void setGrayStroke(float gray) {
        content.append(gray).append(" G").append_i(separator);
    }
    
    /**
     * Changes the current gray tint for stroking paths to black.
     */
    
    public void resetGrayStroke() {
        content.append("0 G").append_i(separator);
    }
    
    /**
     * Helper to validate and write the RGB color components
     * @param   red     the intensity of red. A value between 0 and 1
     * @param   green   the intensity of green. A value between 0 and 1
     * @param   blue    the intensity of blue. A value between 0 and 1
     */
    private void HelperRGB(float red, float green, float blue) {
    	PdfXConformanceImp.checkPDFXConformance(writer, PdfXConformanceImp.PDFXKEY_RGB, null);
        if (red < 0)
            red = 0.0f;
        else if (red > 1.0f)
            red = 1.0f;
        if (green < 0)
            green = 0.0f;
        else if (green > 1.0f)
            green = 1.0f;
        if (blue < 0)
            blue = 0.0f;
        else if (blue > 1.0f)
            blue = 1.0f;
        content.append(red).append(' ').append(green).append(' ').append(blue);
    }
    
    /**
     * Changes the current color for filling paths (device dependent colors!).
     * <P>
     * Sets the color space to <B>DeviceRGB</B> (or the <B>DefaultRGB</B> color space),
     * and sets the color to use for filling paths.</P>
     * <P>
     * Following the PDF manual, each operand must be a number between 0 (minimum intensity) and
     * 1 (maximum intensity).</P>
     *
     * @param   red     the intensity of red. A value between 0 and 1
     * @param   green   the intensity of green. A value between 0 and 1
     * @param   blue    the intensity of blue. A value between 0 and 1
     */
    
    public void setRGBColorFillF(float red, float green, float blue) {
        HelperRGB(red, green, blue);
        content.append(" rg").append_i(separator);
    }
    
    /**
     * Changes the current color for filling paths to black.
     */
    
    public void resetRGBColorFill() {
        content.append("0 g").append_i(separator);
    }
    
    /**
     * Changes the current color for stroking paths (device dependent colors!).
     * <P>
     * Sets the color space to <B>DeviceRGB</B> (or the <B>DefaultRGB</B> color space),
     * and sets the color to use for stroking paths.</P>
     * <P>
     * Following the PDF manual, each operand must be a number between 0 (miniumum intensity) and
     * 1 (maximum intensity).
     *
     * @param   red     the intensity of red. A value between 0 and 1
     * @param   green   the intensity of green. A value between 0 and 1
     * @param   blue    the intensity of blue. A value between 0 and 1
     */
    
    public void setRGBColorStrokeF(float red, float green, float blue) {
        HelperRGB(red, green, blue);
        content.append(" RG").append_i(separator);
    }
    
    /**
     * Changes the current color for stroking paths to black.
     *
     */
    
    public void resetRGBColorStroke() {
        content.append("0 G").append_i(separator);
    }
    
    /**
     * Helper to validate and write the CMYK color components.
     *
     * @param   cyan    the intensity of cyan. A value between 0 and 1
     * @param   magenta the intensity of magenta. A value between 0 and 1
     * @param   yellow  the intensity of yellow. A value between 0 and 1
     * @param   black   the intensity of black. A value between 0 and 1
     */
    private void HelperCMYK(float cyan, float magenta, float yellow, float black) {
        if (cyan < 0)
            cyan = 0.0f;
        else if (cyan > 1.0f)
            cyan = 1.0f;
        if (magenta < 0)
            magenta = 0.0f;
        else if (magenta > 1.0f)
            magenta = 1.0f;
        if (yellow < 0)
            yellow = 0.0f;
        else if (yellow > 1.0f)
            yellow = 1.0f;
        if (black < 0)
            black = 0.0f;
        else if (black > 1.0f)
            black = 1.0f;
        content.append(cyan).append(' ').append(magenta).append(' ').append(yellow).append(' ').append(black);
    }
    
    /**
     * Changes the current color for filling paths (device dependent colors!).
     * <P>
     * Sets the color space to <B>DeviceCMYK</B> (or the <B>DefaultCMYK</B> color space),
     * and sets the color to use for filling paths.</P>
     * <P>
     * Following the PDF manual, each operand must be a number between 0 (no ink) and
     * 1 (maximum ink).</P>
     *
     * @param   cyan    the intensity of cyan. A value between 0 and 1
     * @param   magenta the intensity of magenta. A value between 0 and 1
     * @param   yellow  the intensity of yellow. A value between 0 and 1
     * @param   black   the intensity of black. A value between 0 and 1
     */
    
    public void setCMYKColorFillF(float cyan, float magenta, float yellow, float black) {
        HelperCMYK(cyan, magenta, yellow, black);
        content.append(" k").append_i(separator);
    }
    
    /**
     * Changes the current color for filling paths to black.
     *
     */
    
    public void resetCMYKColorFill() {
        content.append("0 0 0 1 k").append_i(separator);
    }
    
    /**
     * Changes the current color for stroking paths (device dependent colors!).
     * <P>
     * Sets the color space to <B>DeviceCMYK</B> (or the <B>DefaultCMYK</B> color space),
     * and sets the color to use for stroking paths.</P>
     * <P>
     * Following the PDF manual, each operand must be a number between 0 (miniumum intensity) and
     * 1 (maximum intensity).
     *
     * @param   cyan    the intensity of cyan. A value between 0 and 1
     * @param   magenta the intensity of magenta. A value between 0 and 1
     * @param   yellow  the intensity of yellow. A value between 0 and 1
     * @param   black   the intensity of black. A value between 0 and 1
     */
    
    public void setCMYKColorStrokeF(float cyan, float magenta, float yellow, float black) {
        HelperCMYK(cyan, magenta, yellow, black);
        content.append(" K").append_i(separator);
    }
    
    /**
     * Changes the current color for stroking paths to black.
     *
     */
    
    public void resetCMYKColorStroke() {
        content.append("0 0 0 1 K").append_i(separator);
    }
    
    /**
     * Move the current point <I>(x, y)</I>, omitting any connecting line segment.
     *
     * @param       x               new x-coordinate
     * @param       y               new y-coordinate
     */
    
    public void moveTo(float x, float y) {
        content.append(x).append(' ').append(y).append(" m").append_i(separator);
    }
    
    /**
     * Appends a straight line segment from the current point <I>(x, y)</I>. The new current
     * point is <I>(x, y)</I>.
     *
     * @param       x               new x-coordinate
     * @param       y               new y-coordinate
     */
    
    public void lineTo(float x, float y) {
        content.append(x).append(' ').append(y).append(" l").append_i(separator);
    }
    
    /**
     * Appends a B&#xea;zier curve to the path, starting from the current point.
     *
     * @param       x1      x-coordinate of the first control point
     * @param       y1      y-coordinate of the first control point
     * @param       x2      x-coordinate of the second control point
     * @param       y2      y-coordinate of the second control point
     * @param       x3      x-coordinate of the ending point (= new current point)
     * @param       y3      y-coordinate of the ending point (= new current point)
     */
    
    public void curveTo(float x1, float y1, float x2, float y2, float x3, float y3) {
        content.append(x1).append(' ').append(y1).append(' ').append(x2).append(' ').append(y2).append(' ').append(x3).append(' ').append(y3).append(" c").append_i(separator);
    }
    
    /**
     * Appends a B&#xea;zier curve to the path, starting from the current point.
     *
     * @param       x2      x-coordinate of the second control point
     * @param       y2      y-coordinate of the second control point
     * @param       x3      x-coordinate of the ending point (= new current point)
     * @param       y3      y-coordinate of the ending point (= new current point)
     */
    
    public void curveTo(float x2, float y2, float x3, float y3) {
        content.append(x2).append(' ').append(y2).append(' ').append(x3).append(' ').append(y3).append(" v").append_i(separator);
    }
    
    /**
     * Appends a B&#xea;zier curve to the path, starting from the current point.
     *
     * @param       x1      x-coordinate of the first control point
     * @param       y1      y-coordinate of the first control point
     * @param       x3      x-coordinate of the ending point (= new current point)