des3200 usb instruction.txt

ccs集成环境

/* ============================================================================*/ 
/*          Copyright (C) 2005 YINXING TECHNOLOGY CO., LTD                     */ 
/*                          All Rights Reserved.                               */ 
/* ----------------------------------------------------------------------------*/ 
/* ============================================================================*/ 



DES3200 DSP Emulation & Teaching Experiment System 
    USB DaughterCard  instruction：

In this directory, there are lots of files:
     (1). D12USB.out: DES3200 USB DaughterCard drive, which should be load into DSP through CCS to run.
     (2). pc Application: DES3200 USB DaughterCard debugging tool in PC.Run USBCARDen.exe，then you can control the peripherals in DES3200.
     (3). usb driver：USB DaughterCard drive in PC.When USB DaughterCard is found by PC, this drive should be installed.
     (4). DES3200 USB Instruction.txt.

DEMO steps:   

1. RUN CCS firstly. Then execute"Load Program" command to load D12USB.out.
2. When a notice is pop-up to require "Resource Program Code", please choose "No". Enter "RUN"(or F5).
3. Connect USB Port in DES3200 with USB port in PC. And install the usb driver according to PC Note.
4. RUN USBCARDen.exe，and you can control the peripherals in DES3200 through USBCARDen.exe.





DES3200实验箱USB卡演示程序使用说明：

1. 在本目录下有多个文件，分别是：
     (1). D12USB.out: DES3200实验箱的网卡驱动代码，可以直接使用CCS装入DSP并运行；
     (2). pc Application: DES3200 USB卡调试助手，在PC机上运行本目录下的USBCARD.exe，可通过USB卡控制DES3200实验箱的外设；
     (3). usb driver：PC下的驱动程序
     (4). 本说明文件。

   

2. 通过CCS装入并运行：首先启动CCS，使用“Load Program”命令装入D12USB.out。该OUT文件可能包含调试信息，所以若CCS提示查找汇编或C源代码时，请忽略(选择No)。然后按F5键运行程序。

3. 使用USB连接线连接实验箱USB口和PC机USB口，根据提示安装PC操作系统相应的USB驱动程序；
4. 运行USBCARD.exe,通过相应按钮即可控制实验箱外设。