vs_compress.pas

KSDev.VirtualSream.v1.01.rar 虚拟文件系统,

{ TDecompressionStream decompresses data on the fly as data is read from it.

  Compressed data comes from a separate source stream.  TDecompressionStream
  is read-only and unidirectional; you can seek forward in the stream, but not
  backwards.  The special case of setting the stream position to zero is
  allowed.  Seeking forward decompresses data until the requested position in
  the uncompressed data has been reached.  Seeking backwards, seeking relative
  to the end of the stream, requesting the size of the stream, and writing to
  the stream will raise an exception.

  The Position property returns the number of bytes of uncompressed data that
  have been read from the stream so far.

  The OnProgress event is called each time the internal input buffer of
  compressed data is exhausted and the next block is read from the input stream.
  This is useful for updating a progress indicator when you are reading a
  large chunk of data from the decompression stream in a single call.}

  TDecompressionStream = class(TCustomZlibStream)
  public
    constructor Create(Source: TStream);
    destructor Destroy; override;
    function Read(var Buffer; Count: Longint): Longint; override;
    function Write(const Buffer; Count: Longint): Longint; override;
    function Seek(Offset: Longint; Origin: Word): Longint; override;
    property OnProgress;
  end;



{ CompressBuf compresses data, buffer to buffer, in one call.
   In: InBuf = ptr to compressed data
       InBytes = number of bytes in InBuf
  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
       OutBytes = number of bytes in OutBuf   }
procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
                      out OutBuf: Pointer; out OutBytes: Integer);


{ DecompressBuf decompresses data, buffer to buffer, in one call.
   In: InBuf = ptr to compressed data
       InBytes = number of bytes in InBuf
       OutEstimate = zero, or est. size of the decompressed data
  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
       OutBytes = number of bytes in OutBuf   }
procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
 OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
type
  EZlibError = class(Exception);
  ECompressionError = class(EZlibError);
  EDecompressionError = class(EZlibError);


implementation {===============================================================}





{ZKsUtil}
{$IFDEF CALLDOS}
{ reduce your application memory footprint with $M before using this }
function dosAlloc (Size : Longint) : Pointer;
var
  regs: TRegisters;
begin
  regs.bx := (Size + 15) div 16; { number of 16-bytes-paragraphs }
  regs.ah := $48;                { Allocate memory block }
  msdos(regs);
  if regs.Flags and FCarry <> 0 then
    DosAlloc := NIL
  else
    DosAlloc := Ptr(regs.ax, 0);
end;


function dosFree(P : pointer) : boolean;
var
  regs: TRegisters;
begin
  dosFree := FALSE;
  regs.bx := Seg(P^);             { segment }
  if Ofs(P) <> 0 then
    exit;
  regs.ah := $49;                { Free memory block }
  msdos(regs);
  dosFree := (regs.Flags and FCarry = 0);
end;
{$ENDIF}

type
  LH = record
    L, H : word;
  end;

{$IFDEF HugeMem}
  {$define HEAP_LIST}
{$endif}

{$IFDEF HEAP_LIST} {--- to avoid Mark and Release --- }
const
  MaxAllocEntries = 50;
type
  TMemRec = record
    orgvalue,
    value : pointer;
    size: longint;
  end;
const
  allocatedCount : 0..MaxAllocEntries = 0;
var
  allocatedList : array[0..MaxAllocEntries-1] of TMemRec;

 function NewAllocation(ptr0, ptr : pointer; memsize : longint) : boolean;
 begin
   if (allocatedCount < MaxAllocEntries) and (ptr0 <> NIL) then
   begin
     with allocatedList[allocatedCount] do
     begin
       orgvalue := ptr0;
       value := ptr;
       size := memsize;
     end;
     Inc(allocatedCount);  { we don't check for duplicate }
     NewAllocation := TRUE;
   end
   else
     NewAllocation := FALSE;
 end;
{$ENDIF}

{$IFDEF HugeMem}

{ The code below is extremely version specific to the TP 6/7 heap manager!!}
type
  PFreeRec = ^TFreeRec;
  TFreeRec = record
    next: PFreeRec;
    size: Pointer;
  end;
type
  HugePtr = voidpf;


 procedure IncPtr(var p:pointer;count:word);
 { Increments pointer }
 begin
   inc(LH(p).L,count);
   if LH(p).L < count then
     inc(LH(p).H,SelectorInc);  { $1000 }
 end;

 procedure DecPtr(var p:pointer;count:word);
 { decrements pointer }
 begin
   if count > LH(p).L then
     dec(LH(p).H,SelectorInc);
   dec(LH(p).L,Count);
 end;

 procedure IncPtrLong(var p:pointer;count:longint);
 { Increments pointer; assumes count > 0 }
 begin
   inc(LH(p).H,SelectorInc*LH(count).H);
   inc(LH(p).L,LH(Count).L);
   if LH(p).L < LH(count).L then
     inc(LH(p).H,SelectorInc);
 end;

 procedure DecPtrLong(var p:pointer;count:longint);
 { Decrements pointer; assumes count > 0 }
 begin
   if LH(count).L > LH(p).L then
     dec(LH(p).H,SelectorInc);
   dec(LH(p).L,LH(Count).L);
   dec(LH(p).H,SelectorInc*LH(Count).H);
 end;
 { The next section is for real mode only }

function Normalized(p : pointer)  : pointer;
var
  count : word;
begin
  count := LH(p).L and $FFF0;
  Normalized := Ptr(LH(p).H + (count shr 4), LH(p).L and $F);
end;

procedure FreeHuge(var p:HugePtr; size : longint);
const
  blocksize = $FFF0;
var
  block : word;
begin
  while size > 0 do
  begin
    { block := minimum(size, blocksize); }
    if size > blocksize then
      block := blocksize
    else
      block := size;

    dec(size,block);
    freemem(p,block);
    IncPtr(p,block);    { we may get ptr($xxxx, $fff8) and 31 bytes left }
    p := Normalized(p); { to free, so we must normalize }
  end;
end;

function FreeMemHuge(ptr : pointer) : boolean;
var
  i : integer; { -1..MaxAllocEntries }
begin
  FreeMemHuge := FALSE;
  i := allocatedCount - 1;
  while (i >= 0) do
  begin
    if (ptr = allocatedList[i].value) then
    begin
      with allocatedList[i] do
        FreeHuge(orgvalue, size);

      Move(allocatedList[i+1], allocatedList[i],
           SizeOf(TMemRec)*(allocatedCount - 1 - i));
      Dec(allocatedCount);
      FreeMemHuge := TRUE;
      break;
    end;
    Dec(i);
  end;
end;

procedure GetMemHuge(var p:HugePtr;memsize:Longint);
const
  blocksize = $FFF0;
var
  size : longint;
  prev,free : PFreeRec;
  save,temp : pointer;
  block : word;
begin
  p := NIL;
  { Handle the easy cases first }
  if memsize > maxavail then
    exit
  else
    if memsize <= blocksize then
    begin
      getmem(p, memsize);
      if not NewAllocation(p, p, memsize) then
      begin
        FreeMem(p, memsize);
        p := NIL;
      end;
    end
    else
    begin
      size := memsize + 15;

      { Find the block that has enough space }
      prev := PFreeRec(@freeList);
      free := prev^.next;
      while (free <> heapptr) and (ptr2int(free^.size) < size) do
      begin
        prev := free;
        free := prev^.next;
      end;

      { Now free points to a region with enough space; make it the first one and
        multiple allocations will be contiguous. }

      save := freelist;
      freelist := free;
      { In TP 6, this works; check against other heap managers }
      while size > 0 do
      begin
        { block := minimum(size, blocksize); }
        if size > blocksize then
          block := blocksize
        else
          block := size;
        dec(size,block);
        getmem(temp,block);
      end;

      { We've got what we want now; just sort things out and restore the
        free list to normal }

      p := free;
      if prev^.next <> freelist then
      begin
        prev^.next := freelist;
        freelist := save;
      end;

      if (p <> NIL) then
      begin
        { return pointer with 0 offset }
        temp := p;
        if Ofs(p^)<>0 Then
          p := Ptr(Seg(p^)+1,0);  { hack }
        if not NewAllocation(temp, p, memsize + 15) then
        begin
          FreeHuge(temp, size);
          p := NIL;
        end;
      end;

    end;
end;

{$ENDIF}

procedure zmemcpy(destp : pBytef; sourcep : pBytef; len : uInt);
begin
  Move(sourcep^, destp^, len);
end;

function zmemcmp(s1p, s2p : pBytef; len : uInt) : int;
var
  j : uInt;
  source,
  dest : pBytef;
begin
  source := s1p;
  dest := s2p;
  for j := 0 to pred(len) do
  begin
    if (source^ <> dest^) then
    begin
      zmemcmp := 2*Ord(source^ > dest^)-1;
      exit;
    end;
    Inc(source);
    Inc(dest);
  end;
  zmemcmp := 0;
end;

procedure zmemzero(destp : pBytef; len : uInt);
begin
  FillChar(destp^, len, 0);
end;

procedure zcfree(opaque : voidpf; ptr : voidpf);
{$ifdef Delphi16}
var
  Handle : THand