wybed_7seg.fit

这是在max+plusII环境下编译的双端口存储器模拟实验

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 10/09/2008 21:31:15      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "wybed_7seg"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "q0"                           : INPUT_PIN  = 84     ;
    "q1"                           : INPUT_PIN  = 42     ;
    "q2"                           : INPUT_PIN  = 44     ;
    "q3"                           : INPUT_PIN  = 2      ;
    "a"                            : OUTPUT_PIN = 21     ;
    "b"                            : OUTPUT_PIN = 22     ;
    "c"                            : OUTPUT_PIN = 23     ;
    "d"                            : OUTPUT_PIN = 69     ;
    "e"                            : OUTPUT_PIN = 73     ;
    "f"                            : OUTPUT_PIN = 25     ;
    "g"                            : OUTPUT_PIN = 70     ;
    ":44"                          : LOCATION   = LC3_B3 ;
    ":116"                         : LOCATION   = LC5_A24;
    ":139"                         : LOCATION   = LC4_A24;
    ":168"                         : LOCATION   = LC2_B3 ;
    "~168~1"                       : LOCATION   = LC5_B3 ;
    ":169"                         : LOCATION   = LC4_B3 ;
    "~169~1"                       : LOCATION   = LC7_B3 ;
    ":178"                         : LOCATION   = LC7_A24;
    ":184"                         : LOCATION   = LC2_A24;
    ":185"                         : LOCATION   = LC1_B3 ;
    ":186"                         : LOCATION   = LC1_A24;
    "~186~1"                       : LOCATION   = LC3_A24;
    ":187"                         : LOCATION   = LC8_B3 ;
    ":188"                         : LOCATION   = LC8_A24;
    "~188~1"                       : LOCATION   = LC6_B3 ;

END;

INTERNAL_INFO "wybed_7seg"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD0P84  : LORAX = "1:FB0|2:FH0R0,PA0R0C23->LC5_A24,->LC4_A24,->LC7_A24,->LC2_A24,->LC3_A24,->LC8_A24|,2:FH0R1,PA0R1C2->LC3_B3,->LC5_B3,->LC2_B3,->LC7_B3,->LC1_B3,->LC8_B3,->LC6_B3||";
    OD3P42  : LORAX = "1:FB3|2:FH3R0,PA5R0C23->LC5_A24,->LC4_A24,->LC7_A24,->LC2_A24,->LC3_A24,->LC8_A24|,2:FH3R1,PA5R1C2->LC3_B3,->LC5_B3,->LC2_B3,->LC7_B3,->LC1_B3,->LC8_B3,->LC6_B3||";
    OD2P44  : LORAX = "1:FB2|2:FH2R0,PA6R0C23->LC5_A24,->LC4_A24,->LC7_A24,->LC2_A24,->LC3_A24,->LC8_A24|,2:FH2R1,PA6R1C2->LC3_B3,->LC5_B3,->LC2_B3,->LC7_B3,->LC1_B3,->LC8_B3,->LC6_B3||";
    OD1P2   : LORAX = "1:FB1|2:FH1R0,PA20R0C23->LC5_A24,->LC4_A24,->LC7_A24,->LC2_A24,->LC3_A24,->LC8_A24|,2:FH1R1,PA20R1C2->LC3_B3,->LC5_B3,->LC2_B3,->LC7_B3,->LC1_B3,->LC8_B3,->LC6_B3||";
    LC2_B3  : LORAX = "1:MSW1R1C3,HHL12R1->OH9R1P22|";
    LC4_B3  : LORAX = "1:MSW3R1C2,HHL6R1->OH11R1P23|";
    LC7_A24 : LORAX = "1:MSW7R0C22,HHR25R0->OH7R0P69|";
    LC1_B3  : LORAX = "1:MSW0R1C2,HHL21R1->OH8R1P21|";
    LC1_A24 : LORAX = "1:MSW0R0C23,HHR20R0->OH0R0P73|";
    LC8_B3  : LORAX = "1:MSW7R1C2,HHL37R1->OH15R1P25|";
    LC8_A24 : LORAX = "1:MSW4R0C22,HHR44R0->OH4R0P70|";
	LC3_B3  : LORAX2 = "OD1P2, OD2P44, OD3P42, OD0P84";
	LC5_A24 : LORAX2 = "OD0P84, OD3P42, OD2P44, OD1P2";
	LC4_A24 : LORAX2 = "OD0P84, OD3P42, OD2P44, OD1P2";
	LC5_B3  : LORAX2 = "OD0P84, OD3P42, OD2P44, OD1P2";
	LC2_B3  : LORAX2 = "OD1P2, OD2P44, OD3P42, OD0P84";
	LC7_B3  : LORAX2 = "OD0P84, OD3P42, OD2P44, OD1P2";
	LC4_B3  : LORAX2 = "LC5_B3, LC7_B3, LC6_B3, LC3_B3";
	LC7_A24 : LORAX2 = "OD0P84, OD3P42, OD2P44, OD1P2";
	LC2_A24 : LORAX2 = "OD1P2, OD2P44, OD3P42, OD0P84";
	LC1_B3  : LORAX2 = "OD1P2, OD2P44, OD3P42, OD0P84";
	LC3_A24 : LORAX2 = "OD0P84, OD3P42, OD2P44, OD1P2";
	LC1_A24 : LORAX2 = "LC5_A24, LC3_A24, LC4_A24, LC2_A24";
	LC8_B3  : LORAX2 = "OD0P84, OD3P42, OD2P44, OD1P2";
	LC6_B3  : LORAX2 = "OD1P2, OD2P44, OD3P42, OD0P84";
	LC8_A24 : LORAX2 = "OD1P2, OD2P44, OD3P42, OD0P84";
END;