dudoo.cfg

ARM开发板flash的烧写软件

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;           FLASHP CONFIG FILE       ;
:::::::::::::::::::;;;;;;;;;;;;;;;;;;;
;File name: dudoo.cfg
;This file was created by ConfigWizard
;Create Date: 2004-06-20 09:18:17
;CPU : [Samsung] S3C4510
;FLASH IC: [Macronix]  MX29LV160B
;FROM: http://prog.51.net/flashp/wizard.php
;=====================================
;     [e-mail]
;=====================================

[CONFIG]

;;;;;;;;;;;;;;;;;;;;;;;;;;
;    CPU IC:S3C4510
;;;;;;;;;;;;;;;;;;;;;;;;;;
RamAddress=0x03FE0000
RamSize=0x00004000
	
CpuIniCMD=18
CpuIniCMD1=0x03FF3000:0x00000000      	;CLKCON
CpuIniCMD2=0x03FF3008:0x0fff0fff      	;EXTACON0
CpuIniCMD3=0x03FF300C:0x0fff0fff      	;EXTACON1
CpuIniCMD4=0x03FF3010:0x0ffff556      	;EXTDBWTH
CpuIniCMD5=0x03FF3014:0x12040060      	;ROMCON0
CpuIniCMD6=0x03FF3018:0x12048060      	;ROMCON1
CpuIniCMD7=0x03FF301C:0x12048060      	;ROMCON2
CpuIniCMD8=0x03FF3020:0x12048060      	;ROMCON3
CpuIniCMD9=0x03FF3024:0x12048060      	;ROMCON4
CpuIniCMD10=0x03FF3028:0x12048060      	;ROMCON5
CpuIniCMD11=0x03FF302C:0x10000380      	;DRAMCON0
CpuIniCMD12=0x03FF3030:0x10040398      	;DRAMCON1
CpuIniCMD13=0x03FF3034:0x10040398      	;DRAMCON2
CpuIniCMD14=0x03FF3038:0x10040398      	;DRAMCON3
CpuIniCMD15=0x03FF303C:0xce2983fd      	;REFEXTCON
CpuIniCMD16=0x03FF5000:0x00020070      	;IOPMOD
CpuIniCMD17=0x03FF5004:0x2ad00300      	;IOPCON0
CpuIniCMD18=0x03FF5008:0x0000c100      	;IOPDATA


;IDCODE
CpuChipID=0x1FF68000

;For current version,Only support little-endian
;1 for little-endian
LittleEndian=1

;;;;;;;;;;;;;;;;;;;;;;;;;;
;    FLASH IC:MX29LV160B
;;;;;;;;;;;;;;;;;;;;;;;;;;

FlashAddress=0x00000000

;1 for 8bit
;2 for 16bit
FlashWidth=2

FlashID=0x224900C2

SectorSize=5
SectorSize1=0x4000:0x0001
SectorSize2=0x2000:0x0001
SectorSize3=0x2000:0x0001
SectorSize4=0x8000:0x0001
SectorSize5=0x10000:0x001F



;command for Exit.
ExitCMD=1
ExitCMD1=0x555:0xF0

;command for FlashID.
FlashIDCMD=4
FlashIDCMD1=0x555:0xAAAA
FlashIDCMD2=0x2AA:0x5555
FlashIDCMD3=0x555:0x90
FlashIDCMD4=0x0:0x0

;command for ChipErase.
ChipEraseCMD=6
ChipEraseCMD1=0x555:0xAA
ChipEraseCMD2=0x2AA:0x55
ChipEraseCMD3=0x555:0x80
ChipEraseCMD4=0x555:0xAA
ChipEraseCMD5=0x2AA:0x55
ChipEraseCMD6=0x555:0x10

;command for SectorErase.
SectorEraseCMD=6
SectorEraseCMD1=0x555:0xAA
SectorEraseCMD2=0x2AA:0x55
SectorEraseCMD3=0x555:0x80
SectorEraseCMD4=0x555:0xAA
SectorEraseCMD5=0x2AA:0x55
SectorEraseCMD6=0x0:0x30

;command for Program.
ProgramCMD=3
ProgramCMD1=0x555:0xAA
ProgramCMD2=0x2AA:0x55
ProgramCMD3=0x555:0xA0