📄 bcdemo1.c
字号:
/* ILC Data Device Corp.
*
* Advanced Communication Engine Integrated 1553 Terminal
* (ACE) 'C' Software Library
*
* BUS-69080 rel 4.0 05-MAR-1998
*
* Copyright (c) 1995,96,97,98 by ILC Data Device Corp.
* All Rights Reserved.
*
* bcdemo1.c
* Uses BuBCSendData routine for creation and execution of
* a BC to RT message and BuBCGetData routine for creation and
* execution of a RT to BC message. These integrated routines
* are an alternative to setting up major and minor frame
* sequences.
*/
#include <stdio.h>
#include <stdlib.h>
#include <conio.h>
/* uncomment the following if using the 'ACEWIN31.DLL' Dynamic Link Library */
//#define __IMPORTDLL__
#include <stdace.h>
void main ()
{
BuConf_t Conf; /* ACE library configuration type */
BuError_t Err; /* ACE library error status type */
U16BIT data[32]={ 0X0000,0x1111,0x2222,0x3333,0x4444,0x5555,0x6666,0x7777,
0x8888,0x9999,0xAAAA,0xBBBB,0xCCCC,0xDDDD,0xEEEE,0xFFFF,
0x0001,0x0002,0x0004,0x0008,0x0010,0x0020,0x0040,0x0080,
0x0100,0x0200,0x0400,0x0800,0x1000,0x2000,0x4000,0x8000};
clrscr();
/* display revision info */
printf("%s\n\n",BuRev());
/* load configuration from "ace.cfg" file and open ACE library */
Err=BuInit("ace.cfg",&Conf);
if(Err) {
printf("BuError %d %s\n",Err,BuErrorStr(Err));
return;
}
/*set MIL-1553 Channel*/
// advBuSetChannel(&Conf, 1);
/* opens bus controller mode */
BuBCOpen();
/* send 10 words to rt 5 sa 1 on channel A */
Err=BuBCSendData(CW_CHANNELA,5,1,data,10);
printf("%s\n",BuErrorStr(Err));
/* send 32 words to rt 6 sa 1 on channel A
added this [01-SEP-1995] to test 32 word case */
Err=BuBCSendData(CW_CHANNELA,6,1,data,32);
printf("%s\n",BuErrorStr(Err));
/* receive 5 words from rt 8 sa 4 on channel A */
Err=BuBCGetData(CW_CHANNELA,8,4,data,5);
printf("%s\n",BuErrorStr(Err));
/* display data */
if(!Err){int x;for(x=0;x<5;x++)printf("%04x ",data[x]);printf("\n");}
/* receive 32 words from rt 7 sa 2 on channel A
added this [01-SEP-1995] to test 32 word case */
Err=BuBCGetData(CW_CHANNELA,7,2,data,32);
printf("%s\n",BuErrorStr(Err));
/* display data */
if(!Err){int x;for(x=0;x<32;x++)printf("%04x ",data[x]);}
/* closes bus controller mode */
BuBCClose();
/* must call at end of ACE library use */
BuClose();
}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -