xupsd.crp

税控收款机软件。包括底层驱动和上层的应用一起。是一个完整的税控收款机软件方案

 ***************************************************************************
                        PSDsoft Express Version 7.80
                    Output of PSD Configurations
 ***************************************************************************
  PROJECT    : xupsd                          DATE : 05/22/2005
  DEVICE     : uPSD3254A                      TIME : 08:10:11
 ***************************************************************************


 ==== Bus Interface ==== 

 Data Bus Width                                                    = 8-Bit 
 Address/Data Mode                                                 = Multiplexed 
 ALE/AS Signal                                                     = Active High 
 Control Signals                                                   = /WR,/RD,/PSEN 
 Main PSD flash memory will reside in this space at power-up       = Program space 
 Secondary PSD flash memory will reside in this space at power-up  = Program space 


 ==== Other Configurations ====  

 Enable Chip-Select Input(/CSI)      = OFF 
 Enable Standby Voltage Input (PC2)  = ON 
 Enable Standby-on Indicator (PC4)   = ON 
 Enable RDY/Busy function (PC3)      = OFF 
 Load Micro-Cell on edge 
 Security Protection                 = ON 


 ==== JTAG Configurations ====  

 Enable TMS/TCK/TDI/TDO on PC0/PC1/PC5/PC6, respectively = ON 
 Enables JTAG signal TSTAT on PC3 = OFF 
 Enables JTAG signal TERR on PC4 = OFF 
 User Code = 1FFFFFFF

 ==== Flash Sector Protect ====  

 Flash Sector 0 is unprotected 
 Flash Sector 1 is protected 
 Flash Sector 2 is protected 
 Flash Sector 3 is protected 
 Flash Sector 4 is protected 
 Flash Sector 5 is protected 
 Flash Sector 6 is protected 
 Flash Sector 7 is protected 
 Flash Boot Sector 0 is unprotected 
 Flash Boot Sector 1 is unprotected 
 Flash Boot Sector 2 is unprotected 
 Flash Boot Sector 3 is unprotected