makefile.in

qgo-1.5.4-r3.tar.gz linux下一个很好玩的游戏

	echo "Making $$target in $$subdir"; \
	if test "$$subdir" = "."; then \
	dot_seen=yes; \
	local_target="$$target-am"; \
	else \
	local_target="$$target"; \
	fi; \
	(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
	maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	*) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	if test "$$subdir" = "."; then :; else \
	rev="$$subdir $$rev"; \
	fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	echo "Making $$target in $$subdir"; \
	if test "$$subdir" = "."; then \
	local_target="$$target-am"; \
	else \
	local_target="$$target"; \
	fi; \
	(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

ETAGS = etags
ETAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	done | \
	$(AWK) '    { files[$$0] = 1; } \
	END { for (i in files) print i; }'`; \
	mkid -fID $$unique

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
	$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	if test "$$subdir" = .; then :; else \
	test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
	fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	done | \
	$(AWK) '    { files[$$0] = 1; } \
	END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$tags$$unique" \
	|| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	$$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	&& cd $(top_srcdir) \
	&& gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
#>+ 4
KDE_DIST=stamp-h.in subdirs qgo.kdevelop.spec qgo.kdevelop qgo.kdevelop.pcs qt_vc_autoexp_dat.txt Doxyfile Makefile.dist changes qgo.kdevses qgo.spec.kdev qgo.iss 

DISTFILES= $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)


top_distdir = .
distdir = $(PACKAGE)-$(VERSION)

am__remove_distdir = \
	{ test ! -d $(distdir) \
	|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
	&& rm -fr $(distdir); }; }

GZIP_ENV = --best
distcleancheck_listfiles = find . -type f -print

distdir: $(DISTFILES)
	$(am__remove_distdir)
	mkdir $(distdir)
	$(mkinstalldirs) $(distdir)/admin
	@list='$(DISTFILES)'; for file in $$list; do \
	if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	dir="/$$dir"; \
	$(mkinstalldirs) "$(distdir)$$dir"; \
	else \
	dir=''; \
	fi; \
	if test -d $$d/$$file; then \
	if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	fi; \
	cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	else \
	test -f $(distdir)/$$file \
	|| cp -p $$d/$$file $(distdir)/$$file \
	|| exit 1; \
	fi; \
	done
	list='$(SUBDIRS)'; for subdir in $$list; do \
	if test "$$subdir" = .; then :; else \
	test -d $(distdir)/$$subdir \
	|| mkdir $(distdir)/$$subdir \
	|| exit 1; \
	(cd $$subdir && \
	$(MAKE) $(AM_MAKEFLAGS) \
	top_distdir="$(top_distdir)" \
	distdir=../$(distdir)/$$subdir \
	distdir) \
	|| exit 1; \
	fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	top_distdir="${top_distdir}" distdir="$(distdir)" \
	dist-hook
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist dist-all: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	$(am__remove_distdir)
	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
	&& cd $(distdir)/=build \
	&& ../configure --srcdir=.. --prefix=$$dc_install_base \
	$(DISTCHECK_CONFIGURE_FLAGS) \
	&& $(MAKE) $(AM_MAKEFLAGS) \
	&& $(MAKE) $(AM_MAKEFLAGS) dvi \
	&& $(MAKE) $(AM_MAKEFLAGS) check \
	&& $(MAKE) $(AM_MAKEFLAGS) install \
	&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
	&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
	&& (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
	|| { echo "ERROR: files left after uninstall:" ; \
	find $$dc_install_base -type f -print ; \
	exit 1; } >&2 ) \
	&& $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
	&& rm -f $(distdir).tar.gz \
	&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@echo "$(distdir).tar.gz is ready for distribution" | \
	sed 'h;s/./=/g;p;x;p;x'
distcleancheck: distclean
	if test '$(srcdir)' = . ; then \
	echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	exit 1 ; \
	fi
	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	|| { echo "ERROR: files left after distclean:" ; \
	$(distcleancheck_listfiles) ; \
	exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA) config.h
installdirs: installdirs-recursive
installdirs-am:

install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	INSTALL_STRIP_FLAG=-s \
	`test -z '$(STRIP)' || \
	echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean  clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

info: info-recursive

info-am:

install-data-am:

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf autom4te.cache
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
	clean-generic clean-libtool clean-recursive dist dist-all \
	dist-gzip distcheck distclean distclean-generic distclean-hdr \
	distclean-libtool distclean-recursive distclean-tags \
	distcleancheck distdir dvi dvi-am dvi-recursive info info-am \
	info-recursive install install-am install-data install-data-am \
	install-data-recursive install-exec install-exec-am \
	install-exec-recursive install-info install-info-am \
	install-info-recursive install-man install-recursive \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am installdirs-recursive maintainer-clean \
	maintainer-clean-generic maintainer-clean-recursive mostlyclean \
	mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
	tags tags-recursive uninstall uninstall-am uninstall-info-am \
	uninstall-info-recursive uninstall-recursive


#$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
#	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;

$(top_srcdir)/subdirs:
	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs

$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
	@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4

package-messages:
	$(MAKE) -f admin/Makefile.common package-messages
	$(MAKE) -C po merge

dist-hook:
	cd $(top_distdir) && perl admin/am_edit -padmin
	cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

#>+ 2
docs-am:

#>+ 6
force-reedit:
		cd $(top_srcdir) && \
	$(AUTOMAKE) --foreign  Makefile
	cd $(top_srcdir) && perl admin/am_edit Makefile.in


#>+ 2
final:
	$(MAKE) all-am
#>+ 2
final-install:
	$(MAKE) install-am
#>+ 2
no-final:
	$(MAKE) all-am
#>+ 2
no-final-install:
	$(MAKE) install-am
#>+ 3
cvs-clean:
	$(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean

#>+ 3
kde-rpo-clean:
	-rm -f *.rpo