ipc.c

postgresql8.3.4源码,开源数据库

/*-------------------------------------------------------------------------
 *
 * ipc.c
 *	  POSTGRES inter-process communication definitions.
 *
 * This file is misnamed, as it no longer has much of anything directly
 * to do with IPC.	The functionality here is concerned with managing
 * exit-time cleanup for either a postmaster or a backend.
 *
 *
 * Portions Copyright (c) 1996-2008, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  $PostgreSQL: pgsql/src/backend/storage/ipc/ipc.c,v 1.100.2.1 2008/04/16 23:59:51 tgl Exp $
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include <signal.h>
#include <unistd.h>
#include <sys/stat.h>

#include "miscadmin.h"
#ifdef PROFILE_PID_DIR
#include "postmaster/autovacuum.h"
#endif
#include "storage/ipc.h"


/*
 * This flag is set during proc_exit() to change ereport()'s behavior,
 * so that an ereport() from an on_proc_exit routine cannot get us out
 * of the exit procedure.  We do NOT want to go back to the idle loop...
 */
bool		proc_exit_inprogress = false;


/* ----------------------------------------------------------------
 *						exit() handling stuff
 *
 * These functions are in generally the same spirit as atexit(2),
 * but provide some additional features we need --- in particular,
 * we want to register callbacks to invoke when we are disconnecting
 * from a broken shared-memory context but not exiting the postmaster.
 *
 * Callback functions can take zero, one, or two args: the first passed
 * arg is the integer exitcode, the second is the Datum supplied when
 * the callback was registered.
 * ----------------------------------------------------------------
 */

#define MAX_ON_EXITS 20

static struct ONEXIT
{
	pg_on_exit_callback function;
	Datum		arg;
}	on_proc_exit_list[MAX_ON_EXITS], on_shmem_exit_list[MAX_ON_EXITS];

static int	on_proc_exit_index,
			on_shmem_exit_index;


/* ----------------------------------------------------------------
 *		proc_exit
 *
 *		this function calls all the callbacks registered
 *		for it (to free resources) and then calls exit.
 *		This should be the only function to call exit().
 *		-cim 2/6/90
 * ----------------------------------------------------------------
 */
void
proc_exit(int code)
{
	/*
	 * Once we set this flag, we are committed to exit.  Any ereport() will
	 * NOT send control back to the main loop, but right back here.
	 */
	proc_exit_inprogress = true;

	/*
	 * Forget any pending cancel or die requests; we're doing our best to
	 * close up shop already.  Note that the signal handlers will not set
	 * these flags again, now that proc_exit_inprogress is set.
	 */
	InterruptPending = false;
	ProcDiePending = false;
	QueryCancelPending = false;
	/* And let's just make *sure* we're not interrupted ... */
	ImmediateInterruptOK = false;
	InterruptHoldoffCount = 1;
	CritSectionCount = 0;

	elog(DEBUG3, "proc_exit(%d)", code);

	/* do our shared memory exits first */
	shmem_exit(code);

	/*
	 * call all the callbacks registered before calling exit().
	 *
	 * Note that since we decrement on_proc_exit_index each time, if a
	 * callback calls ereport(ERROR) or ereport(FATAL) then it won't be
	 * invoked again when control comes back here (nor will the
	 * previously-completed callbacks).  So, an infinite loop should not be
	 * possible.
	 */
	while (--on_proc_exit_index >= 0)
		(*on_proc_exit_list[on_proc_exit_index].function) (code,
								  on_proc_exit_list[on_proc_exit_index].arg);

	elog(DEBUG3, "exit(%d)", code);

#ifdef PROFILE_PID_DIR
	{
		/*
		 * If we are profiling ourself then gprof's mcleanup() is about to
		 * write out a profile to ./gmon.out.  Since mcleanup() always uses a
		 * fixed file name, each backend will overwrite earlier profiles. To
		 * fix that, we create a separate subdirectory for each backend
		 * (./gprof/pid) and 'cd' to that subdirectory before we exit() - that
		 * forces mcleanup() to write each profile into its own directory.	We
		 * end up with something like: $PGDATA/gprof/8829/gmon.out
		 * $PGDATA/gprof/8845/gmon.out ...
		 *
		 * To avoid undesirable disk space bloat, autovacuum workers are
		 * discriminated against: all their gmon.out files go into the same
		 * subdirectory.  Without this, an installation that is "just sitting
		 * there" nonetheless eats megabytes of disk space every few seconds.
		 *
		 * Note that we do this here instead of in an on_proc_exit() callback
		 * because we want to ensure that this code executes last - we don't
		 * want to interfere with any other on_proc_exit() callback.
		 */
		char		gprofDirName[32];

		if (IsAutoVacuumWorkerProcess())
			snprintf(gprofDirName, 32, "gprof/avworker");
		else
			snprintf(gprofDirName, 32, "gprof/%d", (int) getpid());

		mkdir("gprof", 0777);
		mkdir(gprofDirName, 0777);
		chdir(gprofDirName);
	}
#endif

	exit(code);
}

/* ------------------
 * Run all of the on_shmem_exit routines --- but don't actually exit.
 * This is used by the postmaster to re-initialize shared memory and
 * semaphores after a backend dies horribly.
 * ------------------
 */
void
shmem_exit(int code)
{
	elog(DEBUG3, "shmem_exit(%d)", code);

	/*
	 * call all the registered callbacks.
	 *
	 * As with proc_exit(), we remove each callback from the list before
	 * calling it, to avoid infinite loop in case of error.
	 */
	while (--on_shmem_exit_index >= 0)
		(*on_shmem_exit_list[on_shmem_exit_index].function) (code,
								on_shmem_exit_list[on_shmem_exit_index].arg);

	on_shmem_exit_index = 0;
}

/* ----------------------------------------------------------------
 *		on_proc_exit
 *
 *		this function adds a callback function to the list of
 *		functions invoked by proc_exit().	-cim 2/6/90
 * ----------------------------------------------------------------
 */
void
on_proc_exit(pg_on_exit_callback function, Datum arg)
{
	if (on_proc_exit_index >= MAX_ON_EXITS)
		ereport(FATAL,
				(errcode(ERRCODE_PROGRAM_LIMIT_EXCEEDED),
				 errmsg_internal("out of on_proc_exit slots")));

	on_proc_exit_list[on_proc_exit_index].function = function;
	on_proc_exit_list[on_proc_exit_index].arg = arg;

	++on_proc_exit_index;
}

/* ----------------------------------------------------------------
 *		on_shmem_exit
 *
 *		this function adds a callback function to the list of
 *		functions invoked by shmem_exit().	-cim 2/6/90
 * ----------------------------------------------------------------
 */
void
on_shmem_exit(pg_on_exit_callback function, Datum arg)
{
	if (on_shmem_exit_index >= MAX_ON_EXITS)
		ereport(FATAL,
				(errcode(ERRCODE_PROGRAM_LIMIT_EXCEEDED),
				 errmsg_internal("out of on_shmem_exit slots")));

	on_shmem_exit_list[on_shmem_exit_index].function = function;
	on_shmem_exit_list[on_shmem_exit_index].arg = arg;

	++on_shmem_exit_index;
}

/* ----------------------------------------------------------------
 *		cancel_shmem_exit
 *
 *		this function removes an entry, if present, from the list of
 *		functions to be invoked by shmem_exit().  For simplicity,
 *		only the latest entry can be removed.  (We could work harder
 *		but there is no need for current uses.)
 * ----------------------------------------------------------------
 */
void
cancel_shmem_exit(pg_on_exit_callback function, Datum arg)
{
	if (on_shmem_exit_index > 0 &&
		on_shmem_exit_list[on_shmem_exit_index - 1].function == function &&
		on_shmem_exit_list[on_shmem_exit_index - 1].arg == arg)
		--on_shmem_exit_index;
}

/* ----------------------------------------------------------------
 *		on_exit_reset
 *
 *		this function clears all on_proc_exit() and on_shmem_exit()
 *		registered functions.  This is used just after forking a backend,
 *		so that the backend doesn't believe it should call the postmaster's
 *		on-exit routines when it exits...
 * ----------------------------------------------------------------
 */
void
on_exit_reset(void)
{
	on_shmem_exit_index = 0;
	on_proc_exit_index = 0;
}